Abstract:An increasing number of experiments require the use of ultrasensitive nanomechanical resonators. Relevant examples are the investigation of quantum effects in mechanical systems [1] or the detection of exceedingly small forces as in Magnetic Resonance Force Microscopy (MRFM) [2]. The force sensitivity of a mechanical resonator is typically limited by thermal fluctuations, which calls for detection methods capable of operating at ultralow temperature. Commonly used interferometric techniques, despite their excellent sensitivity, may not be an optimal choice at millikelvin temperatures, because of unwanted resonator heating caused by photon absorption. Although alternative detection techniques based on microwave cavities [3] [4] [5] have shown to perform better at ultralow temperature, these techniques still suffer from the fact that the detection sensitivity decreases as the power input is decreased. Here, we present a measurement approach based on the detection, through a Superconducting Quantum Interference Device (SQUID), of the change of magnetic flux induced in a coil by the motion of a magnetic particle attached to a resonator. This detection scheme avoids direct heating of the resonator, as it does not involve reflecting optical or microwave photons to the resonator. By cooling an ultrasoft silicon resonator to 25 mK, we achieve a force noise of 0.5 aN in a 1 Hz bandwidth. We believe this detection technique can in principle be used even at sub-millikelvin temperatures. Furthermore, it could be used to improve the sensitivity of MRFM experiments, which aim at three dimensional imaging at atomic resolution.

Superconducting inductive displacement detection of a microcantilever

A Novel Inductive Technique for Microcantilever Displacement Detection

A superconducting quantum interference device based read-out of a subattonewton force sensor operating at millikelvin temperatures

Magnetic, thermal, and topographic imaging with a nanometer-scale SQUID-on-cantilever scanning probe

Superconducting microsphere magnetically levitated in an anharmonic potential with integrated magnetic readout

Meissner effect measurement of single indium particle using a customized on-chip nano-scale superconducting quantum interference device system

A SQUID based read-out of sub-attoNewton force sensor operating at millikelvin temperatures

Remote sensing of a levitated superconductor with a flux-tunable microwave cavity

Measuring nanomechanical motion with a microwave cavity interferometer

A Superconducting Micro-Magnetometer for Quantum Vortex in Superconducting Nanoflakes.

Sensitive detection of local magnetic field changes with atomic interferometry by using superconducting Meissner effects

Nonlocal superconducting quantum interference device

Strong Single-Photon Coupling in Superconducting Quantum Magnetomechanics

Nano-SQUIDs with controllable weak links created via current-induced atom migration

MicroSQUIDs based on V/Cu/V Josephson nanojunctions

3D Nano-Bridge-based SQUID Susceptometers for Scanning Magnetic Imaging of Quantum Materials.

Scanning SQUID susceptometers with sub-micron spatial resolution

Superconducting Quantum Magnetometer Based on Flux Focusing Effect for High-Sensitivity Applications

An ultra-sensitive and wideband magnetometer based on a superconducting quantum interference device

Tunable backaction of a dc SQUID on an integrated micromechanical resonator

Ultrasensitive measurement of MEMS cantilever displacement sensitivity below the shot noise limit