On the densest packing of polycylinders in any dimension

Wöden Kusner

DOI: https://doi.org/10.1007/s00454-016-9766-6

2017-06-29

Abstract:Using transversality and a dimension reduction argument, a result of A. Bezdek and W. Kuperberg is applied to polycylinders $\mathbb{D}^2\times \mathbb{R}^n$, showing that the optimal packing density is $\pi/\sqrt{12}$ in any dimension.

Metric Geometry,Combinatorics,Number Theory

What problem does this paper attempt to address?

On non-parallel cylinder packings

Ofek Eliyahu

2023-10-11

Abstract:In this paper we will discuss optimal lower and upper density of non-parallel cylinder packings in $R^{3}$ and similar problems. The main result of the paper is a proof of the conjecture of K. Kuperberg for upper density (existence of a non-parallel cylinder packing with upper density ${\pi}/{\sqrt{12}}$). Moreover, we prove that for every $\varepsilon > 0$ there exists a nonparallel cylinder packing with lower density greater then ${\pi}/{6} - \varepsilon$.

Metric Geometry
How densely can spheres be packed with moderate effort in high dimensions?

Veit Elser

2023-07-12

Abstract:We generate non-lattice packings of spheres in up to 22 dimensions using the geometrical constraint satisfaction algorithm RRR. Our aggregated data suggest that it is easy to double the density of Ball's lower bound, and more tentatively, that the exponential decay rate of the density can be improved relative to Minkowski's longstanding 1/2.

Metric Geometry,Statistical Mechanics
Packing Disks into Disks with Optimal Worst-Case Density

Sándor P. Fekete,Phillip Keldenich,Christian Scheffer

DOI: https://doi.org/10.48550/arXiv.1903.07908

2019-03-19

Abstract:We provide a tight result for a fundamental problem arising from packing disks into a circular container: The critical density of packing disks in a disk is 0.5. This implies that any set of (not necessarily equal) disks of total area $\delta\leq 1/2$ can always be packed into a disk of area 1; on the other hand, for any $\varepsilon>0$ there are sets of disks of area $1/2+\varepsilon$ that cannot be packed. The proof uses a careful manual analysis, complemented by a minor automatic part that is based on interval arithmetic. Beyond the basic mathematical importance, our result is also useful as a blackbox lemma for the analysis of recursive packing algorithms.

Computational Geometry
Dense packings of spheres in cylinders I. Simulations

A. Mughal,H. K. Chan,D. Weaire,S. Hutzler

DOI: https://doi.org/10.1103/PhysRevE.85.051305

2012-05-09

Abstract:We study the optimal packing of hard spheres in an infinitely long cylinder, using simulated annealing, and compare our results with the analogous problem of packing disks on the unrolled surface of a cylinder. The densest structures are described and tabulated in detail up to D/d=2.873 (ratio of cylinder and sphere diameters). This extends previous computations into the range of structures which include internal spheres that are not in contact with the cylinder.

Soft Condensed Matter
A Computer Approach to Determine the Densest Translative Tetrahedron Packings

Chuanming Zong

DOI: https://doi.org/10.1080/10586458.2019.1582378

2019-01-01

Experimental Mathematics

Abstract:In 1900, as a part of his 18th problem, Hilbert proposed the question to determine the densest congruent (or translative) packings of a given solid, such as the unit ball or the regular tetrahedron of unit edges. Up to now, our knowledge about this problem is still very limited, excepting the ball case. It is conjectured that, for some particular solids such as tetrahedra, cuboctahedra, and octahedra, their maximal translative packing densities and their maximal lattice packing densities are identical. To attack this conjecture, this article suggests a computer approach to determine the maximal local translative packing density of a given polytope, by studying associated color graphs and applying optimization. In particular, all the tetrahedral case, the cuboctahedral case and the octahedral case of the conjecture have been reduced into finite numbers of manageable optimization problems.
Packings in bipartite prisms and hypercubes

Boštjan Brešar,Sandi Klavžar,Douglas F. Rall

2023-09-10

Abstract:The $2$-packing number $\rho_2(G)$ of a graph $G$ is the cardinality of a largest $2$-packing of $G$ and the open packing number $\rho^{\rm o}(G)$ is the cardinality of a largest open packing of $G$, where an open packing (resp. $2$-packing) is a set of vertices in $G$ no two (closed) neighborhoods of which intersect. It is proved that if $G$ is bipartite, then $\rho^{\rm o}(G\Box K_2) = 2\rho_2(G)$. For hypercubes, the lower bounds $\rho_2(Q_n) \ge 2^{n - \lfloor \log n\rfloor -1}$ and $\rho^{\rm o}(Q_n) \ge 2^{n - \lfloor \log (n-1)\rfloor -1}$ are established. These findings are applied to injective colorings of hypercubes. In particular, it is demonstrated that $Q_9$ is the smallest hypercube which is not perfect injectively colorable. It is also proved that $\gamma_t(Q_{2^k}\times H) = 2^{2^k-k}\gamma_t(H)$, where $H$ is an arbitrary graph with no isolated vertices.

Combinatorics
Sphere Packings in Euclidean Space with Forbidden Distances

Felipe Gonçalves,Guilherme Vedana

2024-02-15

Abstract:In this paper we study the sphere packing problem in Euclidean space where we impose additional constraints on the separations of the center points. We prove that any sphere packing in dimension $48$, with spheres of radii $r$, such that \emph{no} two centers $x_1$ and $x_2$ satisfy $\sqrt{\tfrac{4}{3}} < \frac{1}{2r}|x_1-x_2| <\sqrt{\tfrac{5}{3}}$, has center density less or equal than $(3/2)^{24}$. Equality occurs for lattice packings if and only if the packing is given by a $48$-dimensional even unimodular extremal lattice. This shows that any of the lattices $P_{48p},P_{48q},P_{48m}$ and $P_{48n}$ are optimal for this constrained packing problem, and gives evidence towards the conjecture that extremal lattices are optimal unconstrained sphere packings in $48$ dimensions. We also provide results for packings up to dimension $d\leq 1200$, where we impose constraints on the distance between centers and on the minimal norm of the spectrum, showing that even unimodular extremal lattices are again uniquely optimal. Moreover, in the $1$-dimensional case, where is not at all clear that periodic packings are among those with largest density, we nevertheless give a condition on the set of constraints that allows this to happen, and we develop an algorithm to find these periodic configurations by relating the problem to a question about dominos.

Number Theory,Classical Analysis and ODEs,Metric Geometry
Six-dimensional sphere packing and linear programming

Matthew de Courcy-Ireland,Maria Dostert,Maryna Viazovska

DOI: https://doi.org/10.1090/mcom/3959

IF: 2.118

2024-03-22

Mathematics of Computation

Abstract:We prove that the Cohn–Elkies linear programming bound for sphere packing is not sharp in dimension 6. The proof uses duality and optimization over a space of modular forms, generalizing a construction of Cohn–Triantafillou [Math. Comp. 91 (2021), pp. 491–508] to the case of odd weight and non-trivial character.

mathematics, applied
Maximally Dense Random Packings of Spherocylinders

Lingyi Meng,Yang Jiao,Shuixiang Li

DOI: https://doi.org/10.1016/j.powtec.2016.01.036

IF: 5.64

2016-01-01

Powder Technology

Abstract:A spherocylinder, a convex 3D object consisting of a cylinder with two hemispherical ends, can possess a wide range of aspect ratios and is one of the most studied non-spherical particle shapes. Previous investigations on disordered spherocylinder packings yielded inconsistent packing characteristics, especially the packing density φ, indicating that density alone is not sufficient to uniquely characterize a packing. In this paper, we delineate in the density–order–metric diagram (i.e. order map) the border curve that separates geometrically feasible and infeasible packings of congruent spherocylinders via the geometric-structure approach, i.e., by generating and analyzing a large number of packing configurations with a diversity of densities and degrees of order generated via a relaxation algorithm. We find that the border curve possesses a sharp transition as the packing density increases, i.e., the initial increase of φ is not associated with any notable increase of the degree of order, while beyond a threshold φ value, the increase of density is strongly positively correlated with the increase of order. This allows us to propose the concept of maximally dense random packing (MDRP) state for spherocylinders, which corresponds to the transition point in the boarder curve and characterizes the on-set of nontrivial spatial correlations among the particles. It can also be considered as the maximally dense packing arrangement of spherocylinders without nontrivial spatial correlations. The degree of order of a spherocylinder packing is quantified via the nematic order parameter (S) and the local order metric (SLocal), which respectively characterize the level of global orientational order and local order in particle clusters. The latter metric SLocal, which measures the average order in the neighborhoods of particles with the second Legendre polynomial, is a new order metric for spherocylinder systems. We find that the packing density of the MDRPs initially increases with the increase of the aspect ratio w from 0, and reaches the maximal value of 0.725 when w=0.5, then drops with further increase of w. The MDRP at w=0.5 is verified to be jammed via a Monte Carlo jamming-testing algorithm and thus, should also represent the maximally random jammed (MRJ) packing state as well.
On the Translative Packing Densities of Tetrahedra and Cuboctahedra

Chuanming Zong

DOI: https://doi.org/10.1016/j.aim.2014.04.009

IF: 1.675

2014-01-01

Advances in Mathematics

Abstract:In 1900, as a part of his 18th problem, Hilbert asked the question to determine the density of the densest tetrahedron packings. However, up to now no mathematician knows the density δt(T) of the densest translative tetrahedron packings and the density δc(T) of the densest congruent tetrahedron packings. This paper presents a local method to estimate the density of the densest translative packings of a general convex solid. As an application, we obtain the upper bound in0.3673469⋯≤δt(T)≤0.3840610⋯, where the lower bound was established by Groemer in 1962, which corrected a mistake of Minkowski. For the density δt(C) of the densest translative cuboctahedron packings, we obtain the upper bound in0.9183673⋯≤δt(C)≤0.9601527⋯. In both cases we conjecture the lower bounds to be the correct answer.
Maximally Dense Random Packings of Intersecting Spherocylinders with Central Symmetry

Lingyi Meng,Shuixiang Li,Xiaohu Yao

DOI: https://doi.org/10.1016/j.powtec.2016.07.059

IF: 5.64

2016-01-01

Powder Technology

Abstract:The packing of rod-like particles has arisen in a variety of scientific and industrial applications. For the factors that attribute to the packing properties of such particles, elongation effect is one of the most important. However, rod-like particles can be easily assembled into non-convex shapes, in which the effects of non-convex deformations should be concerned. In this paper, the dense random packings of identical intersecting spherocylinders with central symmetry are numerically simulated through an analytical model and the relaxation algorithm. The maximally dense random packing (MDRP) states of 2D and 3D intersecting spherocylinders with various aspect ratios are determined from the order maps. In the MDRP states, the specific volume V, defined as the reciprocal of the packing density ϕ, shows a highly linear correlation with the aspect ratio (w≥1.0), which is similar to the monophasic packing of spherocylinders. This indicates that the elongation effect is the main shape factor that attributes to the packing density. Consequently, the explicit formulas to predict the packing densities of 2D and 3D intersecting spherocylinders are built as single-variable functions of the aspect ratio. The dense random packing density of 2D intersecting spherocylinders equals to that of identical spherocylinders when w=1.25. This suggests that a balance exists between the relative excluded volume effect and the multi-point contact effect to the packing density of non-convex particles.
A new lower bound for sphere packing

Marcelo Campos,Matthew Jenssen,Marcus Michelen,Julian Sahasrabudhe

2023-12-16

Abstract:We show there exists a packing of identical spheres in $\mathbb{R}^d$ with density at least \[ (1-o(1))\frac{d \log d}{2^{d+1}}\, , \] as $d\to\infty$. This improves upon previous bounds for general $d$ by a factor of order $\log d$ and is the first asymptotically growing improvement to Rogers' bound from 1947.

Metric Geometry,Combinatorics,Probability
Dense random packings of spherocylinders

Jian Zhao,Shuixiang Li,Ruiping Zou,A. B. Yu

DOI: https://doi.org/10.1039/c1sm06487h

IF: 4.046

2012-01-01

Soft Matter

Abstract:In this paper, the random packing of spherocylinders of different aspect ratios is simulated with an improved geometric based relaxation algorithm. It is shown that the packing density increases to a maximum and then decreases with the growth of aspect ratio, which is consistent with the literature results. However, the maximum packing density reaches 0.722 when the aspect ratio is 0.5, higher than those reported. The positions and orientations of the particles are demonstrated to be randomly distributed. The first three peaks in the radial distribution function g(r) may correspond to three possible local structures, and the second peak moves in the positive direction of the r-axis with the increase of aspect ratio. The coordination number results generally agree with those reported in the literature. Nevertheless, considering that a spherocylinder consists of a cylinder and two hemispherical parts, different types of contacts can be identified, including sphere-sphere, sphere-cylinder, and cylinder-cylinder contacts. The sphere-sphere contacts decrease and cylinder-cylinder contacts increase with the increase of aspect ratio. The findings are useful for a better understanding of the packing of spherocylinders.
New lower bound for the optimal congruent geodesic ball packing density of screw motion groups in $\mathbf{H}^2\!\times\!\mathbf{R}$ space

Arnasli Yahya,Jenő Szirmai

2024-07-31

Abstract:In this paper, we present a new record for the densest geodesic congruent ball packing configurations in $\mathbf{H}^2\!\times\!\mathbf{R}$ geometry, generated by screw motion groups. These groups are derived from the direct product of rotational groups on $\mathbf{H}^2$ and some translation components on the real fibre direction $\mathbf{R}$ that can be determined by the corresponding Frobenius congruences. Moreover, we developed a procedure to determine the optimal radius for the densest geodesic ball packing configurations related to the considered screw motion groups. The highest packing density, $\approx0.80529$, is achieved by a multi-transitive case given by rotational parameters $(2,20,4)$. E. Molnár demonstrated that homogeneous 3-spaces can be uniformly interpreted in the projective 3-sphere $\mathcal{PS}^3(\mathbf{V}^4, \boldsymbol{V}_4, \mathbf{R})$. We use this projective model of $\mathbf{H}^2\!\times\!\mathbf{R}$ to compute and visualize the locally optimal geodesic ball arrangements.

Metric Geometry
Lower bounds for sphere packing in arbitrary norms

Carl Schildkraut

2024-06-12

Abstract:We show that in any $d$-dimensional real normed space, unit balls can be packed with density at least \[\frac{(1-o(1))d\log d}{2^{d+1}},\] improving a result of Schmidt from 1958 by a logarithmic factor and generalizing the recent result of Campos, Jenssen, Michelen, and Sahasrabudhe in the $\ell_2$ norm. Our main tools are the graph-theoretic result used in the $\ell_2$ construction and recent progress on the Bourgain slicing problem.

Metric Geometry,Combinatorics
New lower bound on ball packing density in high-dimensional hyperbolic spaces

Irene Gil Fernández,Jaehoon Kim,Hong Liu,Oleg Pikhurko

2024-09-26

Abstract:We present a new lower bound on the Bowen-Radin maximal density of radius-R ball packings in the m-dimensional hyperbolic space, improving on the basic covering bound by factor \Omega(m(R+\ln m)) as m tends to infinity. This is done by applying the recent theorem of Campos, Jenssen, Michelen and Sahasrabudhe on independent sets in graphs with sparse neighbourhoods.

Combinatorics,Metric Geometry
Maximally Dense Random Packings of Cubes and Cuboids Via a Novel Inverse Packing Method

Lufeng Liu,Zhuoran Li,Yang Jiao,Shuixiang Li

DOI: https://doi.org/10.1039/c6sm02065h

IF: 4.046

2016-01-01

Soft Matter

Abstract:The packings of cubes and cuboids (i.e., "elongated" or "compressed" cubes) are ubiquitous in nature. The high symmetry and space-tiling nature of such particles make them easily packable in dense configurations with a high degree of orientational and translational order. In this paper, we devise a novel inverse packing method that enables one to generate dense hard-particle packings with a controllable degree of disorder/order quantified by predefined order metrics via stochastic Monte Carlo optimizations. We employ the inverse packing method to generate and investigate the maximally dense random packings (MDRPs) of hard cubes and cuboids with aspect ratio α, in which a series of newly introduced normalized local cubatic order parameters sensitive to the onset of any spatial order in packings of cubes and cuboids is minimized. The density of the MDRP of cubes is φ ≈ 0.637, which increases as the shape deviates from the cube limit (α = 1) and reaches the maximal values for cuboids with aspect ratios α = 0.7 or 1.5. These special α values associated with local density extrema are almost identical for those associated with the random packings of spherocylinders, spheroids and superellipsoids, suggesting a universal influence of shape elongation on random packing density. Our inverse packing method can be readily utilized to study the MDRPs of other hard particles and the normalized local cubatic order parameter introduced here is applicable to other shaped particles characterized by three principal axes.
Analytical Constructions of a Family of Dense Tetrahedron Packings and the Role of Symmetry

S. Torquato,Y. Jiao

DOI: https://doi.org/10.48550/arXiv.0912.4210

2010-01-03

Abstract:The determination of the densest packings of regular tetrahedra (one of the five Platonic solids) is attracting great attention as evidenced by the rapid pace at which packing records are being broken and the fascinating packing structures that have emerged. We have discovered the densest known packings of regular tetrahedra with a density $\phi= {12250/14319} = 0.855506...$. These packings are special cases of an analytical two-parameter family of dense periodic packings with four particles per fundamental cell that we have constructed here. From this family, we can recover a set of recent packing arrangements due to Kallus {\it et al.} [<a class="link-https" data-arxiv-id="0910.5226" href="https://arxiv.org/abs/0910.5226">arXiv:0910.5226</a>] with density $\phi={100/117}=0.854700...$, which has higher symmetry than our densest packings, We also describe a procedure that could lead to rigorous upper bounds on the maximal density of tetrahedron packings, which could aid in assessing the packing efficiency of candidate dense packings.

Statistical Mechanics,Soft Condensed Matter,Metric Geometry
Fibre-Like Cylinders, Their Packings and Coverings in Space

Jenő Szirmai

DOI: https://doi.org/10.1007/s00025-024-02152-0

2024-03-25

Results in Mathematics

Abstract:In this paper we define the notion of infinite or bounded fibre-like geodesic cylinder in space, develop a method to determine its volume and total surface area. We prove that the common part of the above congruent fibre-like cylinders with the base plane are Euclidean circles and determine their radii. Using the former classified infinite or bounded congruent regular prism tilings with generating groups we introduce the notions of cylinder packings, coverings and their densities. Moreover, we determine the densest packing, the thinnest covering cylinder arrangements in space, their densities, their connections with the extremal hyperbolic circle arrangements and with the extremal fibre-like cylinder arrangements in and spaces. We prove that in these three previous Thurston geometries, the densities of the optimal fiber-like cylinder packings are equal and the same is true for optimal coverings. In our work we use the projective model of introduced by Molnár (Beitr Algebra Geom 38(2):261–288, 1997).

mathematics, applied

On the densest packing of polycylinders in any dimension

On non-parallel cylinder packings

How densely can spheres be packed with moderate effort in high dimensions?

Packing Disks into Disks with Optimal Worst-Case Density

Dense packings of spheres in cylinders I. Simulations

A Computer Approach to Determine the Densest Translative Tetrahedron Packings

Packings in bipartite prisms and hypercubes

Sphere Packings in Euclidean Space with Forbidden Distances

Six-dimensional sphere packing and linear programming

Maximally Dense Random Packings of Spherocylinders

On the Translative Packing Densities of Tetrahedra and Cuboctahedra

Maximally Dense Random Packings of Intersecting Spherocylinders with Central Symmetry

A new lower bound for sphere packing

Dense random packings of spherocylinders

New lower bound for the optimal congruent geodesic ball packing density of screw motion groups in $\mathbf{H}^2\!\times\!\mathbf{R}$ space

Lower bounds for sphere packing in arbitrary norms

New lower bound on ball packing density in high-dimensional hyperbolic spaces

Maximally Dense Random Packings of Cubes and Cuboids Via a Novel Inverse Packing Method

Analytical Constructions of a Family of Dense Tetrahedron Packings and the Role of Symmetry

Fibre-Like Cylinders, Their Packings and Coverings in Space