Abstract:The Space Propulsion Laboratory (SPL) of the Massachusetts Institute of Technology (MIT) is developing the Ion Electrospray Propulsion System (iEPS), designed to address a current need in CubeSat technology: miniaturized electric thrusters. These could be used for different applications, ranging from attitude control to interplanetary flights. In this work, performed together with the Space Systems Laboratory of the Costa Rica Institute of Technology (SETEC Lab), we explore a case study in which the iEPS is used for constellation management in Low Earth Orbit (LEO) when integrated in a 3U CubeSat. We analyze how a 180° separation in the Right Ascension of the Ascending Node (RAAN) between two CubeSats (SatA and SatB) starting in the same orbit can be achieved by modifying one of the spacecraft's orbital altitude, resulting in a difference in their rate of nodal precession (defined as the drift rate) due to the J 2 effect, and therefore a difference in their relative RAAN. The method consists of SatB increasing its semi-major axis, drifting in a higher orbit with a lower drift rate, and returning to the original semi-major axis once the desired difference in RAAN in achieved relative to the other spacecraft. SatA will stay in its original orbit, using its thruster to compensate for orbital energy loss due to atmospheric drag, therefore demonstrating another application of iEPS for constellation management. Three different simulations were studied, defined as the minimum time trajectory, minimum propellant trajectory and a hybrid trajectory, consisting of reaching a higher altitude orbit, but actively changing the RAAN using the propulsion system instead of drifting. It was observed that the difference in this orbital element could be achieved using 85 g of propellant in as little as 164 days for the minimum time trajectory. The same difference could also be achieved using only 44 g of propellant in 245 days for the minimum propellant trajectory. Furthermore, the results of the hybrid trajectory showed that the goal could be achieved in 161 days, but using 158 g of propellant mass, demonstrating the benefit of using a drift orbit. The results proved the feasibility of implementing iEPS for constellation management using 3U CubeSats in LEO.

Coulomb drag devices: electric solar wind sail propulsion and ionospheric deorbiting

CubeSat testing of Coulomb drag propulsion

Electric Sail Test Cube–Lunar Nanospacecraft, ESTCube-LuNa: Solar Wind Propulsion Demonstration Mission Concept

Plug-and-Play Drag Sail Module for LEO Satellites: Implementation and Early Testing of AirDragMod (ADM)

Magnetic Attitude Control Scheme for Drag Sail Deorbiting with Limited Sensors

Aerodynamic Analysis of Deorbit Drag Sail for CubeSat Using DSMC Method

TI tether rig for solving secular spinrate change problem of electric sail

Photonic spin control for solar wind electric sail

Robust Flight Tether for In-Orbit Demonstrations of Coulomb Drag Propulsion

Preliminary design of a space debris removal mission in LEO using a solar sail

Simulation study of the plasma brake effect

Advanced Inflatable De-Orbit Solutions for Derelict Satellites and Orbital Debris

Three-Dimensional Rapid Orbit Transfer of Diffractive Sail with a Littrow Transmission Grating-Propelled Spacecraft

Combining Magnetic and Electric Sails for Interstellar Deceleration

CubeSat constellation management using Ionic Liquid Electrospray Propulsion

Electric solar wind sail applications overview

Particle Simulation of Plasma Drag Force Generation in the Magnetic Plasma Deorbit

Micro Satellite Orbital Boost by Electrodynamic Tethers

Numerical simulation of a rotating magnetic sail for space applications

Stable attitude dynamics of planar helio-stable and drag-stable sails

Orbital dynamics of a solar sail accelerated by thermal desorption of coatings