A Low-profile Magneto-electric Dipole Antenna Based on Comb Structure and Its Application in Frequency-Scanning Array with Ground
Rui Zhao,Junping Geng,Han Zhou,Silei Yang,Jingzheng Lu,Xudong Tang,Nian Chen,Ao Zhang,Haotian Li,Xuepeng Li,Enyu Li,Chong He,Ronghong Jin
DOI: https://doi.org/10.1109/lawp.2024.3409632
IF: 4.2
2024-01-01
IEEE Antennas and Wireless Propagation Letters
Abstract:This letter proposes a low-profile magnetoelectric (ME) dipole antenna based on a comb structure, as well as its application in a frequency-scanning array with the ground. Both the magnetic and electric dipoles of the ME dipole antenna consist of the comb structure. Due to the subwavelength characteristics of the comb structure, the profile of the proposed antenna is reduced by 72% to 0.065 lambda(c) (lambda(c) is the wavelength at the center frequency) compared with the conventional ME dipole antenna. The measured results show that the single antenna has an impedance bandwidth of 14.65% (2.34 GHz to 2.71 GHz), a high gain (similar to 8 dBi), and high front-to-back ratios (>20 dB). Furthermore, by periodically extending the single antenna on the ground, a series-fed frequency-scanning array is designed to realize 1D scanning from -63 degrees to 63 degrees with gain fluctuation <2.5 dB. The array has the advantages of low cost, wide beam scanning range, low fluctuation of gain, high scanning rate, and small aperture and low profile with ground loaded (< 0.1 lambda(c)), which owe considerable potential to be installed on the metal surface of the high-speed vehicle replacing the traditional phased array for wireless communication and detection.