Abstract:The underground energy geostructure represented by the energy pile is one of the key paths for the cooperative development of underground space and geothermal energy. Because of its advantages of low cost, high efficiency and no extra occupation of underground space, it has become a feasible alternative to the borehole heat exchanger. The change in the temperature field of the energy pile and its surrounding ground not only affects the geological environment but also influences the thermomechanical performance and the durability of the structure. However, the temporal and spatial unsteady-state temperature distribution of piles and surrounding rock under typical intermittent and unbalanced thermal load conditions is still unclear. In this paper, a finite element model was applied to analyze the unsteady-state temperature distribution, and the thermomechanical behavior of the energy pile group was developed and verified. The temperature field distribution of pile and surrounding rock under typical intermittent working and unbalanced thermal load conditions were determined. Moreover, the thermomechanical behavior characteristics of the energy pile group were investigated. Finally, the influences of pile layout on the thermomechanical behavior of the energy pile group were identified by designing six different scenarios. The results indicate that under typical intermittent operation conditions, the temperature of the energy pile and surrounding ground near the heat exchange pipe varies periodically. For areas with unbalanced cooling and heating loads, long-term operation of energy piles leads to thermal accumulation, and the maximum temperature of energy piles occurs in the first daily cycle. In summer/winter working conditions, the increase/decrease in pile temperature induces axial compression/tensile stress. When the pile group is partially used as the energy pile, the non-energy pile acts as the “anchor pile”, and it generates the added tensile stress.

Vertical dynamic responses of model energy piles

An Improved Model for the Horizontal Dynamic Response of Piles in Saturated Soil

Centrifuge Model Tests on Laterally Loaded Piles in Sand

Performance of laterally loaded H-piles in sand

Centrifuge Modeling of Monotonic and Cyclic Lateral Behavior of Monopiles in Sand

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Lateral Cyclic Pile–soil Interaction Studies on a Rigid Model Monopile

Model Test on Bearing Characteristic of Static Drill Rooted Energy Pile

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

Performance of horizontally loaded energy piles in saturated clay

A Multi-Axial Bounding Surface P-Y Model with Application in Analyzing Pile Responses under Multi-Directional Lateral Cycling

Dynamic Response of Offshore Open-Ended Pile under Lateral Cyclic Loadings

An Elasto-Plastic Numerical Analysis of THM Responses of Floating Energy Pile Foundations Subjected to Asymmetrical Thermal Cycles

Model tests of single pile vertical cyclic loading in calcareous sand

Displacement Response of an Energy Pile in Saturated Clay

Thermally induced mechanical interactions of energy pile groups subjected to cyclic nonsymmetrical thermal loading

Accumulated response of single batter pile under lateral cyclic loading in sand

Centrifuge modelling of end-bearing slender energy pile performance under temperature cycles

Thermomechanical response of energy piles in dry sand under monotonic cooling with varying end-support conditions

A Finite Element Model for Investigating Unsteady-State Temperature Distribution and Thermomechanical Behavior of Underground Energy Piles