Abstract:Woven geotextiles are often to be used in roadways for reinforcement purposes due to their higher tensile strengths. In the design of a woven geotextile for practical applications, the focus is mainly put on its reinforcing effect, while its hydraulic behaviors are not major design parameters and the influence of hydraulic properties on the reinforcing effect is often ignored. However, woven geotextiles are predominantly made of polypropylene and polyester, which are hydrophobic. This characteristic can result in a capillary break effect which it is equivalent to raise the ground water table to the location where the geotextile is installed. Numerous researchers have reported that the moisture storage from a capillary break effect can be detrimental to the long-term performance of a pavement structure. Until now, no method is available to effectively resolve this issue. Recently a new type of wicking geotextile is produced which has the capability to laterally drain excess water in a roadway under both saturated and unsaturated conditions. Several field applications demonstrated its potential in improving pavement performance. This paper attempted to investigate the working mechanism of the wicking geotextile through numerical studies and quantify the benefits of the wicking geotextile in term of drainage performance in a pavement structure. A numerical model was developed and validated using column test results from existing literature. After that the drainage performance of the wicking geotextile under different working conditions was simulated and evaluated.

A study on design and properties of woven-nonwoven multi-layered hybrid geotextiles

Woven Geotextile Permeability under Uniaxial and Laterally Constrained Conditions

Experimental Study on Water Permittivity of Woven Polypropylene Geotextile under Tension

The Effect Of Pore Size Deformation On Multi-Pore Model Of Woven Geotextiles In Tension Test

Analysis of Pore Size Distributions of Nonwoven Geotextiles Subjected to Unequal Biaxial Tensile Strains

Influence of uniaxial tensile strain on filtration characteristics of geotextiles

Analytical prediction and experimental research on pore size of nonwoven geotextiles under unconfined uniaxial tensile strain

Effect of unsymmetrically biaxial tension on percent open area of geotextiles

PREDICTION OF THE VERTICAL PERMEABILITY COEFFICIENT BASED ON FRACTAL THEORY FOR WOVEN SLIT-FILM GEOTEXTILES

Permeability Prediction in Nonwoven Geotextiles Using Mathematical Modeling and Numerical Simulation

Experimental study on pore sizecharacteristics of wovengeotextiles subjected to unequal biaxial tensilestrains

Effects of needle punching and hot pressing on mechanical properties of composite geotextiles

Permeability of needle-punched nonwoven geotextiles subjected to uniaxial tensile strains

Numerical investigation of the tensile behaviors of needle-punched nonwoven geotextiles

Tailoring high efficiency polypropylene based composite geotextiles for dewatering fly ash slurries

Spunbonded needle-punched nonwoven geotextiles for filtration and drainage applications: Manufacturing and structural design

Influence of Immersion Conditions on The Tensile Strength of Recycled Kevlar®/Polyester/Low-Melting-Point Polyester Nonwoven Geotextiles through Applying Statistical Analyses

Reexamination of traditional testing techniques for determining WRCs of woven geotextiles in full suction range

Study on the Processing Technology and Mechanical Properties of Nonwoven Fabric Composited by Recycled PP Selvedges

Tailoring high anti-UV performance polypropylene based geotextiles with homogeneous waterborne polyurethane-TiO2 composite emulsions

Working mechanism of a new wicking geotextile in roadway applications: A numerical study