Abstract:In this study, we demonstrated a Monte Carlo simulation to model a finger structure and to calculate the intensity of photons passing through tissues, in order to determine optimal angular separation between a photodetector (PD) and a light-emitting diode (LED), to detect SpO2. Furthermore, our model was used to suggest a mirror-coated ring-type pulse oximeter to improve the sensitivity by up to 80% and improve power consumption by up to 65% compared to the mirror-uncoated structure. A ring-type pulse oximeter (RPO) is widely used to detect photoplethysmography (PPG) signals for SpO2 measurement during sleep and health-status monitoring. Device sensitivity and the power consumption of an RPO, which are key performance indicators, vary greatly with the geometrical arrangement of PD and LED within the inner surface of an RPO. We propose a reflection-boosted design of an RPO to achieve both high sensitivity and low power consumption, and determine an optimal configuration of a PD and LED by performing a 3D Monte Carlo simulation and confirming its agreement with experimental measurement. In order to confirm the reflection-boosted performance in terms of signal-to-noise ratio, R ratio, and perfusion index (PI), RPOs were fabricated with and without a highly reflective coating, and then used for SpO2 measurement from eight participants. Our simulation allows the numerical calculation of the intensity of photon passing and scattering through finger tissues. The reflection-boosted RPO enables reliable measurement with high sensitivity, resulting in less power consumption for the LED and longer device usage than conventional RPOs without any reflective coating, in order to maintain the same level of SNR and PI. Compared to the non-reflective reference RPO, the reflection-boosted RPO design greatly enhanced both detected light intensity (67% in dc and 322% in ac signals at a wavelength λ1 = 660 nm, and also 81% and 375% at λ2 = 940 nm, respectively) and PI (23.3% at λ1 and 25.5% at λ2). Thus, the reflection-boosted design not only enhanced measurement reliability but also significantly improved power consumption, i.e., by requiring only 36% and 30% power to drive the LED sources with λ1 and λ2, respectively, to produce the device performance of a non-reflective RPO reference. It is expected that our proposed RPO provides long-term monitoring capability with low power consumption and an enhanced PI for SpO2 measurement.

A Neo-Reflective Wrist Pulse Oximeter

A Prototype of Reflection Pulse Oximeter Designed for Mobile Healthcare

Wrist02 -- Reliable Peripheral Oxygen Saturation Readings from Wrist-Worn Pulse Oximeters

Design and Development of a Low Cost Pulse Oximeter

Development of a pulse oximeter robust to measurement errors, with the ability to estimate heartrate and transmit data to smartphones

Oximetry: Miniaturized Battery‐Free Wireless Systems for Wearable Pulse Oximetry (Adv. Funct. Mater. 1/2017)

Miniaturized Battery-Free Wireless Systems for Wearable Pulse Oximetry

Wireless, implantable catheter-type oximeter designed for cardiac oxygen saturation

Design of Non-invasive Oximeter

Reflection-Boosted Wearable Ring-Type Pulse Oximeters for SpO2 Measurement with High Sensitivity and Low Power Consumption

Non-Invasive Blood Oxygen Saturation Monitoring for Neonates Using Reflectance Pulse Oximeter

IOT based portable heart rate and SpO2 pulse oximeter

Wearable Tissue Oxygenation Monitoring Sensor and a Forearm Vascular Phantom Design for Data Validation

The Development of a Digital Pulse Oximetry System

Design and Application of a Flexible Blood Oxygen Sensing Array for Wearable Devices

Adaptive low-power wrist SpO2 monitoring system design using a multi-filtering scheme

[Wireless Pulse Wave Monitoring System Based on Reflective Flexible Probe and AFE4490]

Development of Pressure Sensor Based Wearable Pulse Detection Device for Radial Pulse Monitoring.

Wrist-Sensor Pulse Oximeter Enables Prolonged Patient Monitoring in Chronic Lung Diseases

Design of Internet of Things (IoT) and Android Based Low Cost Health Monitoring Embedded System Wearable Sensor for Measuring SpO2, Heart Rate and Body Temperature Simultaneously

A pulse oximeter based on Time-of-Flight histograms