Abstract:Lead (Pb) and cadmium (Cd) are pervasive environmental pollutants known for their significant biological toxicity. The traditional methods for detecting these ions often necessitate large-scale instruments and complex procedures. In contrast, electrochemical detection methods offer advantages such as rapidity, portability, and sensitivity, making them suitable for the simultaneous detection of heavy metals. Metal-organic frameworks (MOFs), characterized by their exceptional adsorption and enrichment capabilities for heavy metal ions, have shown promise in this regard. Nevertheless, the poor conductivity of most MOFs has limited their electrochemical applications. In this study, glassy carbon electrodes (GCEs) were modified using the MOF ZIF-8, in combination with a bismuth complex and carboxylated multi-walled carbon nanotubes, resulting in the fabrication of Bi@ZIF-8/CMWCNTs/GCE electrochemical sensors. Leveraging the porous nature and large specific surface area of ZIF-8, the lead and cadmium ion adsorption by bismuth akin to mercury, and the conductivity of carboxylated multi-walled carbon nanotubes, the sensor developed in this study exhibits excellent capability for simultaneous detection of lead and cadmium ions in water. Under optimized conditions, Pb2+ 2 + and Cd2+ 2 + showed good linear relationships with the peak current in the concentration range of 2.0-50.0 mu g/L. In the concentration range studied, the regression equations for Pb2+ 2 + and Cd2+ 2 + were determined as follows: y = 0.2982x + 0.4553 (r = 0.9962) for Pb2+ 2 + and y = 0.3631x + 0.1242 (r = 0.9949) for Cd2+. 2 + . The detection limits for Pb2+ 2 + and Cd2+ 2 + were 0.76 mu g/L and 0.87 mu g/L, respectively. The relative standard deviations (RSDs) for 50 mu g/L mixed standard solution of Pb and Cd were 1.89 % and 1.23 %, respectively. Furthermore, the RSDs for the same modified electrode tested with 50 mu g/L Pb2+ 2 + and Cd2+ 2 + mixed standard solution over seven consecutive days were 2.27 % and 1.42 %, respectively, under identical conditions. In practice, the lead and cadmium concentrations of a lake were found to range from 4.42 mu g/L to 5.60 mu g/L, while the lead and cadmium concentrations of effluent from a wastewater plant ranged from 11.83 mu g/L to 14.49 mu g/L. This research not only describes a new electrochemical platform for the simultaneous determination of lead and cadmium in water but also provides a new method for the simultaneous determination of lead and cadmium in water. This research is valuable for promoting the application of MOFs in the field of electrochemistry.

Electrochemical Detection of Cd 2+ and Pb 2+ in Wastewater by Amino C-dot-MOF/GCE

C-Dots/UiO-66-NH 2 -enhanced composite modified electrode for simultaneous detection of Pb 2+ and Cd 2+

Simultaneous Determination of Lead and Cadmium in Water by Metal Oxide Framework Complex-Modified Glassy Carbon Electrodes

UiO-66 Based Electrochemical Sensor for Simultaneous Detection of Cd(II) and Pb(II)

Simultaneous electrochemical sensing of heavy metal ions based on a g-C3N4/CNT/NH2-MIL-88(Fe) nanocomposite.

Direct Electrodeposition of Carbon Dots Modifying Bismuth Film Electrode for Sensitive Detection of Cd 2+ and Pb 2+

Amino functionalized bismuth-based metal-organic frameworks and graphene aerogels for simultaneous detection of cadmium and lead ions

Development of MOF-derived Co3O4 microspheres composed of fiber stacks for simultaneous electrochemical detection of Pb2+ and Cu2

Electrochemical Detection of Pb(II) by Glassy Carbon Electrode Modified with Amine-Functionalized Magnetite Nanoparticles

Simultaneous Electrochemical Detection of Cd2+ and Pb2+ Based on an MOF-Derived Carbon Composite Linked with Multiwalled Carbon Nanotubes

Simultaneous detection of Cd(II) and Pb(II) by differential pulse anodic stripping voltammetry at a nitrogen-doped microporous carbon/Nafion/bismuth-film electrode

A Manganese-Based Metal-Organic Framework Electrochemical Sensor for Highly Sensitive Cadmium Ions Detection

An Efficient Electrochemical Sensor Based on Three-Dimensionally Interconnected Mesoporous Graphene Framework for Simultaneous Determination of Cd(Ii) and Pb(Ii)

Electrochemical Sensing of Lead in Drinking Water Using MWCNTs and \b{eta}-Cyclodextrin

Highly Sensitive and Highly Selective Lead Ion Electrochemical Sensor Based on Zn/Cu-BTC-NH2 Bimetallic MOFs with Nano-Reticulated Reinforcing Microstructure

Simultaneous quantification of cadmium and lead ions using β-cyclodextrin functionalized poly(amino acid) electrochemical sensor

Amide-decorated carbon dots as sensitive and selective probes for fluorescence enhancement detection of cadmium ion

Electrochemical Sensor for Cd2+ Detection Based on Carbon Fiber Paper Sequentially Modified with CoMOF, AuNPs, and Glutathione

Rapid detection of heavy metal ions based on a novel BMIMPF6-MWCNTs/GCE sensor and square wave voltammetry in actual water samples

Carbon dots prepared by thermal reactions and selective detections of copper and mercury ions in visible spectrum

Highly sensitive and highly selective lead ion electrochemical sensor based on Zn/Cu-BTC-NH 2 bimetallic MOFs with nano-reticulated reinforcing microstructure