Abstract:Lithium-sulfur (Li-S) battery owing to high energy density and theoretical capacity is anticipated as a high-performance rechargeable power source for flexible electronic devices and electric vehicles. However, the rapid capacity fade, low Coulombic efficiency, and significant self-discharge capacity loss due to the polysulfides shuttling are the major constraints of its real-world applications. To conquer these challenges, despite the physical encapsulation of polysulfides, chemical interactions between shuttle effect-suppressive sulfur host materials and soluble lithium polysulfides have recently been emphasized. Herein, a novel approach to synthesize the high entropic stabilized oxide (HEO) at low temperature is developed from the self-sacrificing template of metal-organic frameworks (MOFs) to chemically anchor the lithium polysulfides. As-synthesized HEO850 at 850 oC (transition temperature) exhibited a single-phase rocksalt crystalline structure with homogenous dispersion of Ni, Mg, Cu, Co, and Zn and reversible entropic phase stabilization in the certain temperature range (750-850 oC). When employed as a chemical anchor to lithium polysulfides (LIPSs) and compared the electrochemical performance of Li-S cells with medium configurational entropic oxide (MEOs) (HEOs-one metal cation), low entropy oxide (LEOs) (HEOs-three metal cations), and routine sulfur ketjen black (S/KB) cells, it revealed a competitive reversible capacity, excellent cycling stability and a low capacity decay rate by immobilizing the LIPSs and facilitating the redox reaction in the cathode. The cells with HEO850/KB/S cathode delivered a higher initial specific discharge capacity of 1244.1 mAh g -1 than those of MEO850/S/KB (979.625 mAh g -1 ), LEO850/S/KB (908 mAh g -1 ), and S/KB (966 mAh g -1 ). After 800 cycles of continuous charging and discharging at 0.5 C, the capacity of 784.1 mAh g -1 with outstanding Coulombic efficiency of 99.66 % is still retained demonstrating excellent cycling stability with a negligible capacity fade rate of 0.04% per cycle. This outstanding performance could be attributed to the synergistic contribution and exposure of numerous active sites of randomly dispersed elements in the HEO850. This study not only highlights the extraordinary electrochemical performance of Li-S battery with efficient immobilization of LIPSs but also provide a novel strategy for the synthesis of HEOs at lower calcination temperature for various energy conversion and storage applications. After getting confidence with these prilimary results, Ti-based HEOs owing to both high ionic and electric conductivities will be investigated at coin and pouch cell level as future research direction.

High Entropy Oxide (CrMnFeNiMg)3O4 with Large Compositional Space Shows Long‐Term Stability as Cathode in Lithium‐Sulfur Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Low-Temperature Calcination of Metal-Organic Frameworks(MOFs) to Derive the High Entropy Stabilized Oxide for High Performance Lithium-Sulfur Batteries

High-entropy oxide/phase-inverted carbon for enhanced lithium–sulfur batteries

High-Entropy Metal Oxide-Coated Carbon Cloth as Catalysts for Long-Life Li-S Batteries

High-entropy chemistry stabilizing spinel oxide (CoNiZnXMnLi)3O4 (X = Fe, Cr) for high-performance anode of Li-ion batteries

High-entropy perovskite oxide nanofibers as efficient bidirectional electrocatalyst of liquid-solid conversion processes in lithium-sulfur batteries

High-entropy oxides as advanced anode materials for long-life lithium-ion Batteries

High‐Entropy Spinel Oxide Nanofibers as Catalytic Sulfur Hosts Promise the High Gravimetric and Volumetric Capacities for Lithium–Sulfur Batteries

Designing a double-coated cathode with high entropy oxides by microwave-assisted hydrothermal synthesis for highly stable Li–S batteries

Utilizing High-Capacity Spinel-Structured High-Entropy Oxide (CrMnFeCoCu)3O4 as a Graphite Alternative in Lithium-Ion Batteries

Stable Lithium–Sulfur Cell Separator with a High-Entropy Metal Oxide Modification

In-situ X-ray studies of high-entropy layered oxide cathode for sodium-ion batteries

High-Entropy Oxide Nanofibers as Catalytic Host Promising High Volumetric Capacity of Sulfur-Based Composites for Lithium–Sulfur Batteries

Porous Fe2O3 Doped Cathodes for Lithium-Sulfur Batteries

High-Entropy Metal Nitride Embedded in Concave Porous Carbon Enabling Polysulfide Conversion in Lithium-Sulfur Batteries

Effects of Elemental Modulation on Phase Purity and Electrochemical Properties of Co‐free High‐Entropy Spinel Oxide Anodes for Lithium‐Ion Batteries

Dual Regulation Mechanism of MoS2/MoO3 Heterostructure for Polysulfide and Volume Effect Enables Stable and Durable Lithium Storage

Spherical Metal Oxides with High Tap Density as Sulfur Host to Enhance Cathode Volumetric Capacity for Lithium-Sulfur Battery.

Coordinated Immobilization and Rapid Conversion of Polysulfide Enabled by a Hollow Metal Oxide/Sulfide/Nitrogen‐Doped Carbon Heterostructure for Long‐Cycle‐Life Lithium‐Sulfur Batteries

A Chemically Stabilized Sulfur Cathode for Lean Electrolyte Lithium Sulfur Batteries