Abstract:Increasing demands for cost-effective electric vehicles and electrochemical energy storage systems require advanced secondary batteries with higher energy density, longer lifetime, and enhanced safety. Increase of the battery operating voltage is one realistic strategy to extend the energy density, but it is accompanied by irreversible structural changes to the electrodes and parasitic reactions within an electrode-electrolyte interphase resulting in capacity fading and subsequent battery failure. Therefore, a fundamental understanding of underlying electrochemical mechanisms in the electrodes during battery cycling is critical for the development of next-generation secondary batteries. Based on our previous studies utilizing in situ surface-enhanced Raman spectroscopy to monitor the evolution of the Si-electrolyte interphase 1 and in situ ATR-FTIR to investigate the voltage dependent electrolyte solution structure changes at the interface, transition metal redox chemistry, and cathode/electrolyte interfacial layer evolution, 2 recently we updated the in situATR-FTIR with a newly designed 'full-cell' that enables us to analyze the interfacial reactions and interactions on the surfaces of both electrodes that directly influence battery performance, lifetime, and safety. Specifically, we focus on transition metal complex formation and its effect on solid-electrolyte interphase (SEI) formation and evolution on the anode due to transition metal dissolution and crosstalk of Mn-rich cathodes at high voltages (≥4.4 V). In addition, using our multi-modal characterization—a combination of in situ gas chromatography with flame ionization detection (GC-FID) and in situ ATR-FTIR—(electro)chemical degradation of the electrolyte is correlated with gas evolution in the battery. For example, GC-FID measures increasing amounts of ethylene gas until the end the first charging cycle of a LiNiO 2 //Graphite cell with Gen2 electrolyte (LiPF 6 in ethylene carbonate (EC):ethyl methyl carbonate (EMC), 3:7 wt.%). Concurrently, in situ ATR-FTIR shows decreasing concentration of EC solvent, as calculated from the FTIR intensity of EC vibrational absorption. Ethylene is a known by-product of ethylene carbonate electrochemical reduction and is produced during SEI formation. 3 Quantifying multiphase reactions occurring during battery operation is critical to understanding and mitigating battery degradation pathways, and developing next-generation battery materials systems. References: Ha, B. J. Tremolet de Villers, Z. Li, Y. Xu, P. Stradins, A. Zakutayev, A. Burrell and S.-D. Han, "Probing the Evolution of Surface Chemistry at the Silicon-Electrolyte Interphase via In-situ Surface-Enhanced Raman Spectroscopy," J. Phys. Chem. Lett. 2020, 11, 286-291. J. Tremolet de Villers, J. Yang, S.-M. Bak and S.-D. Han, "In Situ ATR-FTIR Study of Cathode-Electrolyte Interphase: Electrolyte Solution Structure, Transition Metal Redox, and Surface Layer Evolution," Batter. Supercaps 2021, 4, 778-784. Han, C. Liao, F. Dogan, S. E. Trask, S. H. Lapidus, J. T. Vaughey and B. Key, "Using Mixed Salt Electrolytes to Stabilize Silicon Anodes for Lithium-Ion Batteries via in Situ Formation of Li–M–Si Ternaries (M = Mg, Zn, Al, Ca)," ACS Appl. Mater. Interfaces 2019, 11, 29780-29790.

Uncovering the Redox Shuttle Degradation Mechanism of Ether Electrolytes in Sodium‐Ion Batteries and its Inhibition Strategy

Regulating interfacial structure enables high-voltage dilute ether electrolytes

Biphasic Electrolyte Inhibiting the Shuttle Effect of Redox Molecules in Lithium-Metal Batteries

Ethers Illume Sodium‐Based Battery Chemistry: Uniqueness, Surprise, and Challenges

Unveiling the Critical Role of Ion Coordination Configuration of Ether Electrolytes for High Voltage Lithium Metal Batteries

Stabilizing Microsized Sn Anodes for Na-Ion Batteries with Extended Ether Electrolyte Chemistry

Solvation structure regulation for an ether/ether biphasic electrolyte to balance cathodic and anodic reactions in metal-based batteries

Oxidative Stabilization of Dilute Ether Electrolytes via Anion Modification

Phase Transfer‐Mediated Degradation of Ether‐based Localized High‐concentration Electrolytes in Alkali Metal Batteries

Protecting Li Metal Anode While Suppressing “Shuttle Effect” of Li-S Battery Through Localized High-Concentration Electrolyte

Reduction‐Tolerance Electrolyte Design for High‐Energy Lithium Batteries

Decomposition pathway and stabilization of ether-based electrolytes in the discharge process of Li-O2 battery

Durable Semi-Crystalline Interphase Engineering to Stabilize High Voltage Ni-rich Cathode in Dilute Ether Electrolyte

Degradation pathways in lithium-ion batteries with ethylene carbonate-free electrolytes

Robust cathode-ether electrolyte interphase on interfacial redox assembled fluorophosphate enabling high-rate and ultrastable sodium ion full cells

Reevaluate low-concentration ether-based electrolytes for lithium metal batteries

A novel strategy to improve the electrochemical properties of in-situ polymerized 1,3-dioxolane electrolyte in lithium metal batteries

Designing electrolyte structure to suppress hydrogen evolution reaction in aqueous batteries

Unraveling the Solvent Effect on Solid-Electrolyte Interphase Formation for Sodium Metal Batteries.

Strongly Solvating Ether Electrolytes for High-Voltage Lithium Metal Batteries.

In Situ Multi-Modal Approach for Electrode-Electrolyte Interfacial Chemistryand Electrode and Electrolyte Aging Behavior Studies