Abstract:Upright balance control is a fundamental skill of bipedal robots for various tasks that are usually performed by human beings. Conventional robotic control is often realized by developing accurate dynamic models using a series of fixed torque‐ankle states, but their success is subject to accurate physical and kinematic models. This can be particularly challenging when external disturbing forces present, but this is common in unstructured robotic working environments, leading to ineffective robotic control. To address such limitation, this paper presents an adaptive ankle impedance control method with the support of the advances of adaptive fuzzy inference systems, by which the desired ankle torques are generated in real time to adaptively meet the dynamic control requirement. In particular, the control method is initialised with specific external disturbing forces first representing a general situation, which then evolves whilst performing in a real‐world working environment by acting on the feedback from the control system. This is implemented by initialising a rule base for a typical situation, and then allowing the rule base to evolve to specific robotic working environments. This closed loop feedback and action mechanism timely and effectively configures the control system to meet the dynamic control requirements. The proposed control method was applied to a bipedal robot on a moving vehicle for system validation and evaluation, with robotic loads ranging from 0 to 1.65 kg and external disturbances in terms of vehicle acceleration ranging from 0.5 to 1.5 m/s2 , leading to robotic swing angles up to 7.6o and anti‐disturbance timespans up to 8.5 s. These experimental results demonstrate the power of the proposed upright balance control method in improving the robustness, and thus applicability, of bipedal robots.

Variable Impedance Control for a Single Leg of a Quadruped Robot Based on Contact Force Estimation

Nonlinear MPC-Based Control Framework for Quadruped Robots: Touch-Down in Complex Terrain

Stable walking control and strategy of under-actuated biped robot

Variable Force Tracking Control Via Online Learning

A Novel Impedance Control Based on Equivalent Stiffness for Hydraulic Single-leg Robot

Leg Locomotion Adaption for Quadruped Robots with Ground Compliance Estimation

High Dynamic Position Control for a Typical Hydraulic Quadruped Robot Leg Based on Virtual Decomposition Control

Variable stiffness locomotion with guaranteed stability for quadruped robots traversing uneven terrains

Force-feedback Based Active Compliant Position Control Strategy for a Hydraulic Quadruped Robot

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Implementation of Impedance Control for Lower-Limb Rehabilitation Robots

An Optimization-Based Locomotion Controller for Quadruped Robots Leveraging Cartesian Impedance Control

Active impedance control based adaptive locomotion for a bionic hexapod robot

Variable Stiffness Force Tracking Impedance Control Using Differential-less Method

A composite motion control method for quadruped robots in trot gait

Fuzzy-based variable impedance control of uncertain robot manipulator in the flexible environment: A nonlinear force contact model-based approach

Adaptive ankle impedance control for bipedal robotic upright balance

Adaptive variable impedance control for dynamic contact force tracking in uncertain environment

Stewart-Inspired Vibration Isolation Control for a Wheel-legged Robot via Variable Target Force Impedance Control

Quadruped Robot Control: An Approach Using Body Planar Motion Control, Legs Impedance Control and Bézier Curves

Unknown system dynamics estimator-based impedance control for lower limb exoskeleton with enhanced performance