Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Influence of Microstructure Randomness on the Shear Behaviour and Compressive Strength of Continuous Carbon Fibre Composites

A unified method to generate representative volume elements with tailored random fibre arrangements to estimate the shear and transverse behaviours of unidirectional continuous fibres composite plies

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Microscale and mesoscale modeling for compressive failure in unidirectional carbon fiber reinforced polymer composites with random distribution of fiber misalignments

Compressive Behavior of Unidirectional FRP with Spacial Fibre Waviness and Non-Uniform Fibre Packing

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Compressive behaviour of fibre reinforced plastic with random fibre packing and a region of fibre waviness

Numerical investigation on the variation of compressive failure mechanisms in unidirectional carbon fiber reinforced polymer

Static Compressive Strength Prediction of Open-Hole Structure Based on Non-Linear Shear Behavior and Micro-Mechanics

Microstructure dependent transverse strength criterion for UD-CFRP composites via computational micromechanics and machine learning

Random field modeling of local strength of a randomly arranged unidirectional fiber-reinforced composite material under transverse tensile loading

Effect of resin-rich areas on failure behavior of unidirectional CFRP under transverse pure shear

Micromechanical modeling of unidirectional composites with random fiber and interphase thickness distributions

On micromechanics approach to stiffness and strength of unidirectional composites

Compressive and Shear Performance of Three-Dimensional Rigid Stochastic Fibrous Networks: Experiment, Finite Element Simulation, and Factor Analysis

Micro-mechanical analysis on random RVE size and shape in multiscale finite element modelling of unidirectional FRP composites

A crack-bridging model considering microstructural randomness in biological composite materials

Computational extreme value statistics of strength for WC-Co composites at small specimens