Abstract:The need for certification standards for new convergence products, such as a smart LED streetlight system, has been identified as a critical issue. This study proposes simulation modeling for smart LED streetlight systems and suggests three certification standards: the minimum time to initiate dimming-up, the duration of the dimming-up period, and the number of concurrently controlled streetlights. We utilized Relux to model streetlights and roads in terms of luminance levels, and used analytical formulas to compute the braking distances of oncoming vehicles. The two models were integrated into a smart LED streetlight system model using Simio. Simulation experiments were conducted with two objectives: to provide certification standards, and to apply and verify them in real-world cases. We experimented with 630 scenarios, modeling various dynamic situations involving roads and vehicles, and applied the model to two actual roads in the Republic of Korea to test its validity. The model was subsequently applied to roads for which traffic-volume data were available, to determine potential energy savings. The proposed simulation method can be applied to a smart LED streetlight system and to new products that lack certification standards. Furthermore, the proposed certification standards offer alternative approaches to operating streetlight systems more efficiently.

What problem does this paper attempt to address?

This paper attempts to solve the problem of the lack of certification standards for intelligent LED streetlight systems. Specifically, the author verifies and proposes new certification standards through simulation modeling to ensure the safety and energy efficiency of intelligent LED streetlight systems. The following are the main problems and solutions in the paper: ### Research Background Intelligent LED streetlight systems can remotely control brightness through sensors and adjust the light according to the approach of vehicles. However, at present, the international and domestic certification standards for intelligent LED streetlight systems are not yet perfect, especially in terms of dimming control. This has led to potential safety hazards and insufficient energy efficiency in practical applications. ### Objectives of the Paper 1. **Propose new certification standards**: For the dimming control of intelligent LED streetlight systems, propose three key certification standards: - Minimum time to initiate dimming - up - Duration of the dimming - up period - Number of concurrently controlled streetlights 2. **Verify the effectiveness of these standards**: Verify the applicability and effectiveness of these standards in the actual road environment through simulation experiments. ### Methods and Tools - **Relux**: Used to simulate the illuminance levels of streetlights and roads. - **Simio**: A discrete - event simulation tool used to integrate streetlight and vehicle models and simulate the entire intelligent LED streetlight system. - **Mathematical formulas**: Calculate the reaction distance and braking distance of vehicles to ensure the safety of dimming control. ### Experimental Design 1. **Simulation Modeling**: Construct 630 scenarios, covering different road environments, installation conditions, and vehicle speeds. 2. **Standard Derivation**: Derive three certification standards from the simulation results. 3. **Practical Verification**: Apply these standards to two actual roads in Anseong, South Korea, to verify their effectiveness and feasibility. ### Main Achievements - Proposed three certification standards for intelligent LED streetlight systems. - Verified the applicability of these standards under different conditions through simulation experiments. - Provided a simulation - based method that can be applied to the development of certification standards for other similar products. ### Conclusion This research provides a scientific basis for the safe operation of intelligent LED streetlight systems, improves road safety through reasonable dimming control, and provides a reference for the development of certification standards for related products in the future. ### Formula Display The formulas involved in the paper are as follows: - Reaction distance \(d_1\): \[ d_1=\frac{V}{3.6}t \] where \(V\) is the vehicle speed (km/h) and \(t\) is the reaction time (s). - Braking distance \(d_2\): \[ d_2 = \frac{v^{2}}{2gf}=\frac{\left(\frac{V}{3.6}\right)^{2}}{2\times9.8\times f}=\frac{V^{2}}{254f} \] where \(v\) is the vehicle speed (m/s), \(g\) is the gravitational acceleration (9.8 m/s²), and \(f\) is the coefficient of sliding friction. - Stopping sight distance \(D\): \[ D = d_1 + d_2 \] These formulas are used to calculate the distance required for a vehicle to completely stop from recognizing a hazard, ensuring the safety of dimming control.

Simulation-Based Analysis for Verifying New Certification Standards of Smart LED Streetlight Systems

Static and Dynamic Analysis of a Wind-Solar Hybrid Street Lamp

Finite Element Analysis of A Wind-Solar Hybrid Powered Street Light

Based on Simulation Method for Solving Traffic Jam Problems.

Study of Energy Efficient with Intelligent Traffic and Illuminating Control System

A Novel Optimization Strategy For Led Street Lamp Designing

Functional Optimization of Smart Street Lamp via Hybrid Kano-DEMATEL Model: A Case Study on Hebi Area, China

Natural Surveillance for Crime and Traffic Accidents: Simulating Improvements of Street Lighting in an Older Community

SIMULATION OF SMART STREET LIGHT INTENSITY CONTROLLER: AN ENERGY SAVING APPROACH

Development of a Procedure for Using Surrogate Safety Assessment Model and VISSIM for Safety Assessment at Signalized Intersections

Comparative study on simulation performances of CORSIM and VISSIM for urban street network.

An Intelligent Controller of LED Street Light Based on Discrete Devices

Optical Analysis of an 80-W Light-Emitting-Diode Street Lamp

Design of Energy-Saving Control System for LED Street Lamps

A Simulative Platform that Evaluates the Energy Save Rate of the Street Lamp System Based on JiST/STRAW

Design and Implementation of a Real-Time Street Light Dimming System Based on a Hybrid Control Architecture

Optimal Selection of Distribution, Power, and Type of Luminaires for Street Lighting Designs Using Multi-Criteria Decision Model

Intelligent Street Lighting Energy-Saving System Based on Climate Conditions and Vehicle’s Movements

SSL: Smart Street Lamp Based on Fog Computing for Smarter Cities.

LED Luminaires: Many Chips—Many Photometric and Lighting Simulation Issues to Solve

An Intelligent Lighting Control System for Urban Street Lamps Using Internet of Things