Abstract:A high-precision coastal acoustic tomography (CAT) experiment for reconstructing the current variation in Dalian Bay (DLB) was successfully conducted by 11 coastal acoustic tomography systems during March 7-8, 2015. The horizontal distributions of tidal currents and residual currents were mapped well by the inverse method, which used reciprocal travel time data along 51 successful sound transmission rays. The semi-diurnal tide is dominant in DLB, with a maximum speed of 0.69 m s(-1) at the eastern and southwestern parts near the bay mouth that gradually decreases toward the inner bay with an average velocity of 031 m s(-1). The residual current enters the observational domain from the two flanks of the bay mouth and flows out in the inner bay. One anticyclone and one cyclone were noted inside DLB as was one cyclone at the bay mouth. The maximum residual current in the observational domain reached 0.11 m s(-1), with a mean residual current of 0.03 m s(-1). The upper 15-m depth-averaged inverse velocities were in excellent agreement with the moored Acoustic Doppler Current Profiler (ADCP) at the center of the bay, with a root mean square difference (RMSD) of 0.04 m s(-1) for the eastward and northward components. The precision of the present tomography measurements was the highest thus far owing to the largest number of transmission rays ever recorded. Sensitivity experiments showed that the RMSD between CAT and moored-ADCP increased from 0.04 m s(-1) to 0.08 m s(-1) for both the eastward and northward velocities when reducing the number of transmission rays from 51 to 11. The observational accuracy was determined by the spatial resolution of acoustic ray in the CAT measurements. The cost optimal scheme consisted of 29 transmission rays with a spatial resolution of acoustic ray of 2.03 root km(2)/ray numbers. Moreover, a dynamic analysis of the residual currents showed that the horizontal pressure gradient of residual sea level and Coriolis force contribute 38.3% and 36.0%, respectively. This indicates that the two terms are the dominant factors of the residual currents in DLB. (C) 2017 Elsevier Ltd. All rights reserved.

A Hybrid Method for Ultrasonic Thickness Measurement of Cobalt-Rich Crusts in a Reverberation Environment

Measurement of the Echo Reduction for Passive Materials Based on Inverse Filtering Technique

A Real-Time 3-D Underwater Acoustical Imaging System

Enhancing Remote Sensing of Water Temperature Using Acoustic Tomography and 3-D-RPS Algorithm

Enhancing Ultrasonic Time-of-flight Diffraction Measurement Through an Adaptive Deconvolution Method

Water Temperature Reconstruction Via Station Position Correction Method Based on Coastal Acoustic Tomography Systems.

A Depth-Adaptive Waveform Decomposition Method For Airborne Lidar Bathymetry

A Method for Estimating the Distance of Near-Ocean-Bottom Sources by Combining VLF Underwater Acoustic Field and Scholte Wave Field

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

Ultrasonic Thickness Measurement Method and System Implementation Based on Sampling Reconstruction and Phase Feature Extraction

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer

An ultrasonic signal processing method to improve defect depth estimation in composites based on empirical mode decomposition

Non-Destructive Evaluation of Coating Thickness Using Water Immersion Ultrasonic Testing

High-frequency ultrasound-based thickness measurement of highly attenuating materials

Underwater quantitative thickness mapping through marine growth for corrosion measurement using shear wave EMAT with high lift-off performance

Evaluation of the Recognition of Cobalt-Rich Manganese Crusts Based on Deep Learning Networks with Physical Phantoms

Research on ultrasonic signal processing algorithm based on CEEMDAN joint wavelet packet thresholding

High-precision Measurement of Tidal Current Structures Using Coastal Acoustic Tomography

An Improved Time Delay Measurement Method for the Long-Distance Underwater Environment

Super-Resolution Optimal Basic Wavelet Transform and Its Application in Thin-Bed Thickness Characterization