Low-profile Dual-band Microstrip Patch Antenna with Shorting Pins
Min Wei,Junlin Wang,Xin Wang,Tao Liu,Yuhang Lu,Yuehui Gao
DOI: https://doi.org/10.1109/lawp.2024.3370724
IF: 4.2
2024-01-01
IEEE Antennas and Wireless Propagation Letters
Abstract:A single-layer low-profile dual-band patch antenna is proposed in this paper. A Π-shaped slot is engraved on the radiating patch, separating it into a main patch and a parasitic patch to achieve the dual-band characteristics. The purpose of loading five shorting pins between the two vertical slots on the main patch is to turn down the two frequencies, which can generate TM01 mode and TM11 mode. To improve the impedance matching in the lower band and broaden the dual-band bandwidth, four shorting pins are placed on the edge of the long side of the parasitic patch, which can excite the TM10 mode. The combination of the TM01, TM11 and TM10 modes achieves the 3.45∼3.7 GHz and 4.7∼5.33 GHz dual-band. Manufacturing and measuring a prototype. The results of the measurements indicate that the antenna achieves a dual-band with reflection coefficient less than -6dB which are 3.5∼3.75 GHz (250 MHz, 7.0%) and 4.73∼5.41 GHz (680 MHz, 13.4%) with peak gains of 6.23 dB and 5.06 dB in the low and high bands, respectively. The average total efficiencies in the dual bands are 64.2% and 77.3%, respectively.
telecommunications,engineering, electrical & electronic