Dylan Sabulsky,Colin V. Parker,Nathan D. Gemelke,Cheng Chin
Abstract:We present the design, construction and characterization of Bitter-type electromagnets which can generate high magnetic fields under continuous operation with efficient heat removal for cold atom experiments. The electromagnets are constructed from a stack of alternating layers consisting of copper arcs and insulating polyester spacers. Efficient cooling of the copper is achieved via parallel rectangular water cooling channels between copper layers with low resistance to flow; a high ratio of the water-cooled surface area to the volume of copper ensures a short length scale ~1 mm to extract dissipated heat. High copper fraction per layer ensures high magnetic field generated per unit energy dissipated. The ensemble is highly scalable and compressed to create a watertight seal without epoxy. From our measurements, a peak field of 770 G is generated 14 mm away from a single electromagnet with a current of 400 A and a total power dissipation of 1.6 kW. With cooling water flowing at 3.8 l/min, the coil temperature only increases by 7 degrees Celsius under continuous operation.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the design of a continuously - operating electromagnet that can achieve high - efficiency heat dissipation while generating a high magnetic field in cold - atom experiments. Specifically, the authors propose an improved Bitter - type electromagnet design, aiming to overcome several major drawbacks in traditional coil designs, such as large heat dissipation, low cooling efficiency, and difficult - to - modify structures. By using highly - efficient parallel rectangular water - cooling channels, this design can significantly improve the cooling efficiency, reduce the temperature gradient, and maintain a relatively low operating temperature in the continuous - operation mode. In addition, this design is highly scalable and can achieve a waterproof seal without using epoxy resin, thereby enhancing the reliability and service life of the electromagnet.
### Main Problems and Solutions
1. **Requirement for High Magnetic Field**:
- Cold - atom experiments require the generation of a magnetic field as high as 1,000 gauss (G) or more. Traditional electromagnet designs have difficulty stably generating such a high magnetic field in the continuous - operation mode.
2. **High - Efficiency Heat Dissipation**:
- Traditional electromagnets generate a large amount of heat at high currents, leading to a temperature rise and affecting the stability and lifespan of the equipment. The design proposed in the paper achieves rapid heat dissipation through highly - efficient parallel rectangular water - cooling channels, ensuring the stable operation of the equipment at high currents.
3. **Structural Optimization**:
- Traditional designs usually require a large amount of epoxy resin to fix the coils, which not only increases the manufacturing cost but may also lead to performance degradation after long - term use. The design in the paper achieves a waterproof seal through mechanical compression, avoiding the use of epoxy resin and improving the reliability and maintainability of the equipment.
4. **High Magnetic Field and Low Energy Consumption**:
- By increasing the proportion of the copper layer and optimizing the design of the cooling channels, this electromagnet generates a higher magnetic field intensity per unit of energy consumption. For example, a single electromagnet can generate a magnetic field of 770 gauss at a current of 400 amperes, with a total power consumption of only 1.6 kilowatts.
### Experimental Verification
To verify the effectiveness of the design, the authors conducted detailed experimental tests, including magnetic field measurement, resistance and inductance measurement, and thermal characteristic tests. The experimental results show that, at a cooling water flow rate of 3.8 liters per minute, the temperature rise of this electromagnet during continuous operation is only 7 °C, far lower than that of traditional designs.
### Application Prospects
This design is particularly suitable for multiple application scenarios in cold - atom experiments, such as Zeeman decelerators, magnetic traps, magnetic conveyor belts, and Feshbach resonance control. The high - efficiency heat dissipation and stable magnetic field output make this electromagnet an ideal choice for these high - precision experiments.
In conclusion, through innovative design and experimental verification, this paper has successfully solved the key problems of high - magnetic - field generation and high - efficiency heat dissipation in cold - atom experiments, providing important technical support for research in related fields.