Abstract:Exploration of novel molecular sieving membranes with improved performance and reduced synthesis cost is always a hot topic with one typical example of recently emerged 2D graphene oxides (GO) membranes. These graphene oxide (GO) nanoflakes with thickness less than 10 nm have been applied as the building block to assemble these 2D membranes. Most of these multi-layered GO nanosheets themselves have inherent interlayer channels. To clarify the molecular sieving property stemmed from the interspace of the building block itself or between two neighboring blocks, in this work, commercial graphene flakes (GF) with average thickness of 7 nm were applied to form GF membranes under the hydraulic pressure. GF membrane in the overall thickness of 0.75 mm made from 25-mu m-sized flakes displayed good molecular sieving property and the measured helium permeance of 2.02 x 10(-8) mol s(-1) m(-2) Pa-1 with selectivity of 65 (He/CO2) and 22 (He/N-2) and separation factor more than 10 from gas mixture separation. Such results clearly demonstrate that molecular sieving properties are sourced from the tortuous interspace between the building blocks as the individual GFs are gas impermeable. Modeling results indicate that two main types of pores (larger size from 2 to 4 nm for Knudsen diffusion and smaller size from 0.3 to 0.4 nm for molecular sieving) co-exist in such membranes. Modeling results also imply that despite of the large overall thickness (0.75 mm), the molecular sieving layer inside the GF membrane was only 247 nm contributing the gas selectivity. The effect of graphene flake size on gas permeation behavior on the resultant membrane was also investigated. This work may provide some insights to the mass transport mechanism of these 2D graphene membranes.

Graphene as a Prototype Crystalline Membrane

Graphene Helicoid: Distinct Properties Promote Application of Graphene Related Materials in Thermal Management

Thermally Induced Hex-Graphene Transitions in 2D Carbon Crystals

Graphene's morphology and electronic properties from discrete differential geometry

Characterization of two carbon allotropes, cyclicgraphene and graphenylene, as semi-permeable materials for membranes

Geometry Controls Conformation of Graphene Sheets: Membranes, Ribbons, and Scrolls

Properties of Suspended Graphene Membranes

Crumpled And Collapsed Conformations In Graphite Oxide Membranes

Graphene-Nanotube 3d Networks: Intriguing Thermal and Mechanical Properties

Graphene-like Membranes: From Impermeable to Selective Sieves

Can graphene bilayers be the membrane mimetic materials?

"Tattered" membrane

Mechanical Properties of Sp3-Bonded Carbon and Boron Nitride 2D Membranes: A First Principles Study

Thermomechanical Insight into the Stability of Nanoporous Graphene Membranes

Experimental and Theoretical Exploration of Gas Permeation Mechanism Through 2D Graphene (not Graphene Oxides) Membranes

Mechanical Properties of Phagraphene Membranes: A Fully Atomistic Molecular Dynamics Investigation

Two-dimensional membrane as elastic shell with proof on the folds revealed by three-dimensional atomic mapping

Origin of Anomalous Water Permeation through Graphene Oxide Membrane

The structure of suspended graphene sheets

Two-dimensional material membrane fabrication: progress and challenges

Review of 2D Graphitic Carbon Nitride-Based Membranes: Principles, Syntheses, and Applications