Abstract:The mining of underground coal resources causes long-period and large-gradient deformation of the overlying surface of the working face. Due to the characteristic of long period of deformation, D-InSAR (Differential Interferometry Synthetic Aperture Radar) technology can be easily affected by temporal incoherence. When the surface deformation gradient exceeds the monitoring gradient of D-InSAR technology, the conventional D-InSAR technology will easily cause unwrapping failure, and thus is difficult to realize 3D (Three Dimensional) monitoring of mining-induced surface deformation. In order to solve the problems, a prediction method of 3D surface deformation based on D-InSAR and constraints of DPIM (Dynamic Probability Integral Method) model was studied in this paper. Firstly, SAR image data of the working face after the end of mining were processed by differential interference to obtain the LOS surface deformation during a period of time after the mining. Secondly, according to the relationship between D-InSAR LOS (Line Of Sight) deformation and 3D surface deformation, the D-InSAR observation equation for mining subsidence based on DPIM constraints was constructed. Then, the solution method of the condition equation of DPIM-InSAR (Interferometry Synthetic Aperture Radar) based on GA (Genetic Algorithm) was constructed. Finally, based on obtained LOS deformation, the 3D surface deformation of surface subsidence was obtained using the 3D prediction method based on DPIM-InSAR. The results of simulation experiments effectively verified the feasibility of the method. Differential interference processing was performed for Sentinel-1A data after the mining. The LOS deformation of the 1613 working face of Guqiao South Mine between 20 January 2018 and 25 February 2018 was obtained. 3D surface deformation from the beginning of the mining to completion was obtained using the proposed prediction method of 3D surface deformation and subsidence based on DPIM-InSAR (Dynamic Probability Integral Method). The predicted subsidence values were compared with the measured values. The results showed that the fitting errors of the LOS deformation were mostly within 3 mm. The fitting mean square error was ± 2.37 mm (accounting for 6.7% of the maximum LOS deformation value), and the fitting accuracy was high. The fitting mean square error of subsidence was ± 120 mm (accounting for 7.3% of the maximum subsidence). The results in engineering application show that the proposed 3D predicting method of surface deformation and subsidence based on DPIM-InSAR has certain practical values.

A New Model for three-dimensional Deformation Extraction with Single-track InSAR Based on Mining Subsidence Characteristics

Retrieving Three-Dimensional Large Surface Displacements in Coal Mining Areas by Combining SAR Pixel Offset Measurements with an Improved Mining Subsidence Model

A New Method for Extracting Three-Dimensional Surface Deformation in Underground Mining Areas Based on the Differentiability of D-InSAR Line-of-Sight Displacements

A New Method of Monitoring 3D Mining-Induced Deformation in Mountainous Areas Based on Single-Track InSAR

Combination of InSAR with a Depression Angle Model for 3D Deformation Monitoring in Mining Areas

Optimization of three-dimensional multi-level surface deformation in mining areas through integration of deformation fusion model and Lagrange multiplier method based on single high resolution OTD-InSAR pair

Time Series InSAR Three-Dimensional Displacement Inversion Model of Coal Mining Areas Based on Symmetrical Features of Mining Subsidence

A Novel Deformation Extraction Approach for Sub-Band InSAR and Its Application in Large-Scale Surface Mining Subsidence Monitoring

Prediction of Mining-Induced 3-D Deformation by Integrating Single-Orbit SBAS-InSAR, GNSS, and Log-Logistic Model (LL-SIG)

Mining Subsidence Prediction Parameter Inversion by Combining GNSS and DInSAR Deformation Measurements

Research on Surface Deformation of Ordos Coal Mining Area by Integrating Multitemporal D-InSAR and Offset Tracking Technology

A DPIM-InSAR method for monitoring mining subsidence based on deformation information of the working face after mining has ended

InSAR Modeling and Deformation Prediction for Salt Solution Mining Using a Novel CT-PIM Function

A Novel Method of Monitoring Surface Subsidence Law Based on Probability Integral Model Combined with Active and Passive Remote Sensing Data

Use of Multiplatform SAR Imagery in Mining Deformation Monitoring with Dense Vegetation Coverage: A Case Study in the Fengfeng Mining Area, China

Deformation Monitoring and Spatiotemporal Evolution of Mining Area with Unmanned Aerial Vehicle and D-InSAR Technology

Deriving Mining-Induced 3-D Deformations at Any Moment and Assessing Building Damage by Integrating Single InSAR Interferogram and Gompertz Probability Integral Model (SII-GPIM)

Monitoring nonlinear large gradient subsidence in mining areas through SBAS-InSAR with PUNet and Weibull model fusion

Long-term ground multi-level deformation fusion and analysis based on a combination of deformation prior fusion model and OTD-InSAR for longwall mining activity

Mining Deformation Monitoring Based on Lutan-1 Monostatic and Bistatic Data

Integration of unmanned aerial vehicle (UAV)-based photogrammetry and InSAR for mining subsidence and parameters inversion: a case study of the Wangjiata Mine, China