Abstract:Construction of the separation membranes with underwater super-oleophobic property proposes a promising pathway in the field of oily wastewater treatment, but it is still plagued with the bottlenecks of the time-consuming preparation and the unsatisfied stability of resultant membranes. Herein, the alkali induced hydroxylation and the nature-inspired construction through the coordination coating of copper ions with tannic acid (Cu 2+ /TA) were performed on the poly (vinylidene fluoride) (PVDF) membrane substrate prepared by the thermally induced phase separation (TIPS). The introduced hydroxyl groups resulted from the membrane hydroxylation is beneficial for the subsequent construction of the Cu 2+ /TA coordination coating layer. The excellent hydrophilicity and the specifically hierarchical roughness of the immobilized coating layer endow the modified membranes with the hydrophilic/underwater super-oleophobic property. The optimized membrane correspondingly showed the improved flux of around 2000 L m −2 •h −1 accompanied with the oil rejection of above 97.0% in treating two simulated oil-in-water emulsions (toluene and n -hexane). Besides, the flux recovery ratio increased from 72.4% of the pristine membrane to 93.3% of the modified membrane after the BSA fouling and regeneration test, which is also indicative of the improved antifouling behavior as a result of the hydrophilic coordination coating. The membrane stability was further demonstrated by the results of the sandpaper abrasion-resisting test and the long-term (up to 6 months) air-exposure treatment. This work might provide a straightforward strategy for designing advanced membrane for the large-scale applications of oil/water separation.

Salt-induced and alcohol-induced hydrophobic and underoil superhydrophobic poly (vinylidene fluoride) membranes for effective oil collection

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

High-flux Underwater Superoleophobic Hybrid Membranes for Effective Oil–water Separation from Oil-Contaminated Water

Janus membrane with asymmetric wettability for efficient oil/ water separation

Preparation of Superhydrophilic and Underwater Superoleophobic Pvdf-G-Paa Porous Membranes and Their Oil-Water Separation Performance

Poly(vinylidene fluoride) membranes with underwater superoleophobicity for highly efficient separation of oil-in-water emulsions in resisting fouling

Zwitterionic polyvinylidene fluoride membranes with strong underwater superoleophobicity and oil-fouling resistance for oily water purification

Underwater superoleophobic polyvinylidene fluoride membranes using sulfonated dopamine and polyethyleneimine as additives for the separation of oily water

Fabrication of a superhydrophilic PVDF membrane with excellent chemical and mechanical stability for highly efficient emulsion separation

Preparation of PVDF Microporous Membranes via Combining TIPS with Rolling Embossing for Water-in-Oil Emulsions Separation

Solvent-nonsolvent regulated nano-functionalization of super-wetting membranes for sustainable oil/water separation

One-Pot Fabrication of Superhydrophilic/Underwater Superoleophobic Membrane Based on Mussel-Inspired Chemistry for High-Efficiency Oil-Water Separation

Metal-organic framework modified hydrophilic polyvinylidene fluoride porous membrane for efficient degerming selective oil/water emulsion separation

Preparation of sodium alginate-polyvinyl alcohol@PVDF hybrid membrane for efficient oil-water separation

Bioinspired under-liquid superlyophobic PVDF membrane via synchronous in-situ growth of sliver nanoparticles for oil/water emulsion separation

Antifouling superhydrophilic porous glass membrane based on sulfobetaine prepared by thiol−ene click chemistry for high-efficiency oil/water separation

Surface modification of PVDF membrane via deposition-grafting of UiO-66-NH 2 and their application in oily water separations

In situ polymerized superhydrophobic and superoleophilic nanofibrous membranes for gravity driven oil-water separation

Nature-inspired construction of poly (vinylidene fluoride) membranes through the coordination coating of tannic acid with copper ions for oil-in-water emulsions separation

Mineral-Coated Polymer Membranes with Superhydrophilicity and Underwater Superoleophobicity for Effective Oil/Water Separation

Polyphenylene Sulfide Microfiber Membrane with Superhydrophobicity and Superoleophilicity for Oil/water Separation