Abstract:This paper reviews the history, the present status and possible future developments of photovoltaic (PV) materials for terrestrial applications. After a brief history and introduction of the photovoltaic effect theoretical requirements for the optimal performance of materials for pn-junction solar cells are discussed. Most important are efficiency, long-term stability and, not to be neglected, lowest possible cost. Today the market is dominated by crystalline silicon in its multicrystalline and monocrystalline form. The physical and technical limitations of this material are discussed. Although crystalline silicon is not the optimal material from a solid state physics point of view it dominates the market and will continue to do this for the next 5–10 years. Because of its importance a considerable part of this review deals with materials aspects of crystalline silicon. For reasons of cost only multicrystalline silicon and monocrystalline Czochralski (Cz) crystals are used in practical cells. Light induced instability in this Cz-material has recently been investigated and ways to eliminate this effect have been devised. For future large scale production of crystalline silicon solar cells development of a special solar grade silicon appears necessary. Ribbon growth is a possibility to avoid the costly sawing process. A very vivid R&D area is thin-film crystalline silicon (about 5–30μm active layer thickness) which would avoid the crystal growing and sawing processes. The problems arising for this material are: assuring adequate light absorption, assuring good crystal quality and purity of the films, and finding a substrate that fulfills all requirements. Three approaches have emerged: high-temperature, low-temperature and transfer technique. Genuine thin-film materials are characterized by a direct band structure which gives them very high light absorption. Therefore, these materials have a thickness of only one micron or less. The oldest such material is amorphous silicon which is the second most important material today. It is mainly used in consumer products but is on the verge to also penetrate the power market. Other strong contenders are chalcogenides like copper indium diselenide (CIS) and cadmium telluride. The interest has expanded from CuInSe2, to CuGaSe2, CuInS2 and their multinary alloys Cu(In,Ga)(S,Se)2. The two deposition techniques are either separate deposition of the components followed by annealing on one hand or coevaporation. Laboratory efficiencies for small area devices are approaching 19% and large area modules have reached 12%. Pilot production of CIS-modules has started in the US and Germany. Cadmium telluride solar cells also offer great promise. They have only slightly lower efficiency and are also at the start of production. In the future other materials and concepts can be expected to come into play. Some of these are: dye sensitized cells, organic solar cells and various concentrating systems including III/V-tandem cells. Theoretical materials that have not yet been realized are Auger generation material and intermediate metallic band material.

A review of thin film solar cell technologies and challenges

A comprehensive review on life cycle assessment of commercial and emerging thin-film solar cell systems

Scientific complications and controversies noted in the field of CdS/CdTe thin film solar cells and the way forward for further development

Flexible CIGS, CdTe and a-Si:H based thin film solar cells: A review

Printable Solar Cells from Advanced Solution-Processible Materials

Review on the developments in copper indium gallium diselenide (CIGSe)-based thin film photovoltaic devices

Recent progress in CZTS (CuZnSn sulfide) thin-film solar cells: a review

Photovoltaic materials, history, status and outlook

Review of novel approach and scalability forecast of ZnSe and Perovskite/Graphene based thin film materials for high performance solar cell applications

CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospects

A Review on the Third-Generation Solar Cells: Model, Materials, and Performance.

Advanced Solar Materials for Thin-Film Photovoltaic Cells

A Review of CIGS Thin Film Semiconductor Deposition via Sputtering and Thermal Evaporation for Solar Cell Applications

Thin film Si solar cell and solid oxide fuel cell technologies for a low cost, environmentally friendly and sustainable source of energy

Crystalline and thin-film silicon solar cells: state of the art and future potential

Cu(In, Ga)(Se, S)2 thin‐film technology: Aspects of historical development, current status, and future prospects

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

Advances In Cu2znsn(S,Se)(4) Thin Film Solar Cells

Progress in development of copper antimony sulfide thin films as an alternative material for solar energy harvesting

Perspectives of chalcopyrite-based CIGSe thin-film solar cell: a review

From Crystalline to Low-cost Silicon-based Solar Cells: a Review