Abstract:In this research, we proposed an acoustic impedance-based design method to increase the soundproofing bandwidths and maintain efficient air ventilation for tubular structures consisting of hollow air-flowing channels. This research has great potential to provide design guidelines based on an acoustic impedance model and even/odd mode analysis for hollow-tube ventilated devices containing resonance and antiresonances. We introduced a thin ventilated structure with a subwavelength thickness of 0.107 λ where λ corresponds to the lowest frequency within the filtering bandwidth, a 19.4 % cross-section open for air passage, and a 10 dB fractional bandwidth of 110.2 % (i.e., 90 % sound energy is blocked), which is broader than that of a conventional Fano-like structure of 44.7 %. To experimentally verify the proposed approach, two prototypes, including lateral-coupled and longitudinal-coupled devices, were designed, fabricated with 3D printing, and experimentally characterized via a commercial-available impedance tube system. The simulations matched the measurements and demonstrated the 10 dB fractional bandwidth of 65 % and 91.5 % and ventilation efficiencies of 21.4 % and 33.4 %, respectively. The main contribution of this work is that the proposed approach can be adopted for lateral or longitudinal coupled ventilated structures with broadband sound insulations and lower the effects of resonance-induced sound transmissions. Besides, the proposed acoustic-impedance model can significantly save the required tremendous computational resources and time compared to FEM simulations. Moreover, the proposed lateral and longitudinal ventilated structures are expected to benefit broadband sound filtering and noise reduction for thin panel or tubular silencers

A low-frequency multiple-band sound insulator without blocking ventilation along a pipe

Low-frequency and Multiple-Bands Sound Insulation Using Hollow Boxes with Membrane-Type Faces

Sound Insulation in a Hollow Pipe with Subwavelength Thickness

Omnidirectional ventilated acoustic barrier

An Acoustic Metamaterial Composed of Multi-Layer Membrane-Coated Perforated Plates for Low-Frequency Sound Insulation

An open-structure sound insulator against low-frequency and wide-band acoustic waves

Low-frequency sound insulation of honeycomb membrane-type acoustic metamaterials with different interlayer characteristics

Improving Sound Insulation in Low Frequencies by Multiple Band-Gaps in Plate-Type Acoustic Metamaterials

Low-Frequency, Open, Sound-Insulation Barrier by Two Oppositely Oriented Helmholtz Resonators

Broadband ventilated acoustic barrier with low reflection

A low-frequency sound absorbing material with subwavelength thickness

Plate-Type Metamaterials For Extremely Broadband Low-Frequency Sound Insulation

Flexible sound insulator with subwavelength film structure for noise reduction

An acoustic impedance design method for tubular structures with broadband sound insulations and efficient air ventilation

Quasi-zero-stiffness metamaterial pipe for low-frequency wave attenuation

A controllable low-frequency broadband sound absorbing metasurface

A composite acoustic black hole for ultra-low-frequency and ultra-broad-band sound wave control

Tunable acoustic transmission control and dual-mode ventilated sound insulation by a coupled acoustic metasurface

An ultra-low-frequency sound absorber and its application in noise reduction in ducts

A Lightweight Low-Frequency Sound Insulation Membrane-Type Acoustic Metamaterial

Improving sound insulation near ring and coincidence frequencies of cylindrical sandwich shells