Endoparasitic chiggers. VI. Neoschoengastia esorhina sp. n. (Acarina: Trombiculidae), a second intranasal chigger of birds.

J. Brennan

DOI: https://doi.org/10.2307/3277936

1971-06-01

Journal of Parasitology

Abstract:

What problem does this paper attempt to address?

Review on Ultrasonic Disintegration of Heavy/Viscous Oil-bearing Soil

WEN Jun-jie,JIA Yong-gang,CHEN Huan-lin

DOI: https://doi.org/10.19336/j.cnki.trtb.2011.04.045

2011-01-01

Abstract:Power ultrasound causes cavitation,heating,and intense agitation of a liquid medium or suspension,and activates chemical processes and enhances heat and mass transfer processes.Ultrasonic vibrations penetrate into different regions of a multiphase system and reach the areas of the interface(small cracks,closed pores) that are inaccessible in other separation methods(conventional methods).Function principle of somochemistry was presented in this paper.The research status with ultrasonic decontaminating heavy/viscous oil-bearing soil and problems were analyzed.It is suggested that as a result of the sonochemical reaction of the polar components of bitumen with the alkaline reagent,a separating agent with surface-active properties was formed.Ultrasonic is beneficial to the appliance of chemical washing in the remediation of heavy/viscous oil contaminated fine soil or soil granule with high clay concentration.
A novel sub-pilot-scale direct-contact ultrasonic dehydration technology for sustainable production of distillers dried grains (DDG)

Amir Malvandi,Danielle Nicole Coleman,Juan J Loor,Hao Feng

DOI: https://doi.org/10.1016/j.ultsonch.2022.105982

Abstract:DDG is a major source of protein, calcium, phosphorus, and sulfur is arguably the most important byproduct of the bioethanol industry with increasing demand over the past few years. Reducing energy consumption in the DDG production process and energy recovery from DDG is vital for sustainable bioethanol productions. In this paper, a novel direct-contact multi-frequency, multimode, and modulated (MMM) ultrasonic dryer (US) was developed for the first time and has been applied in dehydration of wet distillers' grain (WDG). Ultrasonic drying (US) was combined with a convective airflow (HA) at different temperatures of 25 (room temperature), 50 and 70 °C to evaluate the impact of US, HA, and US + HA on drying kinetics, activation energy, chemical compositions, microstructure, and color of DDG. Semi-empirical kinetic models were developed and evaluating drying performances showed that the application of ultrasound significantly enhanced the drying rate and decreased the drying time (by 46%), especially at low drying temperatures. The activation energy for moisture removal in the presence of ultrasound was about 50% of that without ultrasound. The final dried distillers' grains product processed by ultrasonic drying had a brighter color, a higher available protein, a higher digestible protein (the lowest acid detergent insoluble crude protein), and a better surface profile with no compromise on minerals and fiber contents.
Sono-physical and Sono-Chemical Effects of Ultrasound: Primary Applications in Extraction and Freezing Operations and Influence on Food Components

Xizhe Fu,Tarun Belwal,Giancarlo Cravotto,Zisheng Luo

DOI: https://doi.org/10.1016/j.ultsonch.2019.104726

IF: 9.336

2020-01-01

Ultrasonics Sonochemistry

Abstract:Ultrasound is an advanced non-thermal food-processing technology that has received increasing amounts of interest as an alternative to, or an adjuvant method for, conventional processing techniques. This review explores the sono-physical and sono-chemical effects of ultrasound on food processing as it reviews two typical food-processing applications that are predominantly driven by sono-physical effects, namely ultrasound-assisted extraction (UAE) and ultrasound-assisted freezing (UAF), and the components modifications to food matrices that can be triggered by sono-chemical effects. Efficiency enhancements and quality improvements in products (and extracts) using ultrasound are discussed in terms of mechanism and principles for a range of food-matrix categories, while efforts to improve existing ultrasound-assist patterns was also seen. Furthermore, the progress of experimental ultrasonic equipments for UAE and UAF as food-processing technologies, the core of the development in food-processing techniques is considered. Moreover, sono-chemical reactions that are usually overlooked, such as degradation, oxidation and other particular chemical modifications that occur in common food components under specific conditions, and the influence on bioactivity, which was also affected by food processing to varying degrees, are also summarised. Further trends as well as some challenges for, and limitations of, ultrasound technology for food processing, with UAE and UAF used as examples herein, are also taken into consideration and possible future recommendations were made.
Effect of Ultrasonic Pulses on the Functional Properties of Stickwater

Francisco Cadena-Cadena,Dulce Alondra Cuevas-Acuña,Felipe de Jesús Reynaga-Franco,Gilberto Rodríguez-Felix,María del Socorro Núñez-Ruiz,Odilia Azucena Higuera-Barraza,Alba Rocio Ochoa-Meza,Joe Luis Arias-Moscoso

DOI: https://doi.org/10.3390/app12031351

2022-01-27

Applied Sciences

Abstract:Large volumes of waste are generated in the processing operations of the fishing industry. These effluents contain potentially useful proteins. However, it is necessary to concentrate them for utilization. The stickwater (SW) resulting from this operation was subjected to a protein-fractionation step, pH adjustment (acid + alkaline) and ultrasonic pulsing in order to aid in hydrolysis and evaluate its functional and nutritional properties. The protein fractions, as well as the protein hydrolysates present in the tail water, had a chemical composition of 54.85 ± 4.21 and 74.81 ± 3.89 protein (%), 0.8 ± 0.1 and 0.2 ± 0.015 fat (%), 7.21 ± 0.67% ash (%), respectively. The increase in low-molecular-weight peptides results in an increase in free-radical scavenging activity. However, the increase in ferric-reducing antioxidant power may be due to the HCl treatment performed by the company. An increase in the functional properties of the samples treated with ultrasonic pulses was observed. Therefore, the chemical, nutritional and functional characteristics of stickwater suggest its potential use as a food additive.
Application of High-Power Ultrasound for Dehydration of Vegetables: Processes and Devices

J. A. Gallego-Juárez,E. Riera,S. de la Fuente Blanco,G. Rodríguez-Corral,V. M. Acosta-Aparicio,A. Blanco

DOI: https://doi.org/10.1080/07373930701677371

IF: 3.3

2007-11-06

Drying Technology

Abstract:High-intensity ultrasound is a tool with a great potential for vegetable dehydration. Airborne ultrasonic waves have been used for drying materials in combination with hot air systems to obtain adequate drying rates at lower temperatures. Nevertheless, the extension of this technique has been limited because of practical difficulties in the efficient generation of high-intensity ultrasound in air. The implementation of a new technology of plate-transducer power ultrasonic generators has opened up new possibilities in this area. This article reviews the development and testing of an ultrasonic technology for vegetable dehydration based on the application of the new power ultrasound generators. Two experimental procedures have been carried out by airborne ultrasound and ultrasonic vibration in direct contact with the vegetable.

engineering, chemical, mechanical
Phase separation technology based on ultrasonic standing waves: A review

Xiaoming Luo,Juhang Cao,Haiyang Gong,Haipeng Yan,Limin He

DOI: https://doi.org/10.1016/j.ultsonch.2018.06.006

Abstract:The current understanding and developments of phase separation technology based on ultrasonic standing waves (USWs) are reviewed. Most previous reviews have focused on microscale applications of this technology in the fields of biological materials and food processing. This review covers different applications of ultrasonic separation technology, especially in petrochemical industry. The kinetic mechanism of ultrasonic, design of reactors, separation principles, and related applications are discussed in detail. We lay special stress on the motion characteristics of particles in USWs. According to the particle numbers, particle properties, and frequency characteristics, the separation principles are reasonably categorized as: (1) Bands effect; (2) Acoustophoretic coefficient; (3) Particle density; (4) Sweep frequency. Diverse separation principles improve the universality of ultrasonic separation technology. However, acoustic streaming and acoustic cavitation are two of the main challenges in the application of ultrasonic separation. Based on the current research, the future research can focus on the following aspects: (1) Explore the mechanism of ultrasonic demulsification; (2) Establish unified evaluation criteria for acoustic separation systems; (3) Develop the basis for determination of acoustic cavitation and non-cavitation.
On the Development of Emulsion Destabilization Technologies for Dairy Industry

Ahmed M. Al-Jumaily,Ata Meshkinzar,Laura M. P. Torres

DOI: https://doi.org/10.1007/s12393-023-09336-4

2023-02-11

Food Engineering Reviews

Abstract:Separation of two fluids or particles from an emulsion is a fundamental process in many applications such as creaming of milk in dairy sector and extraction of various oils (avocado oil, palm oil, etc.) among many others. The aim of this paper is to elaborate on the development of various methods and technologies employed for the separation process including gravity, chemical, and centrifugation as well as the newer acoustic separation technology. Influential parameters affecting the performance, advantages, and disadvantages for each method will be discussed and compared. Various transducer configurations and corresponding experimental set-ups and operating parameters are also examined for acoustic separation. Accordingly, the future trend is proposed for introducing new transducer configurations to diminish or preferably eliminate the current disadvantages and barriers and to improve the separation process performance.

food science & technology
Ultrasonic Production of Nano-Size Dispersions and Emulsions

Thomas Hielscher

DOI: https://doi.org/10.48550/arXiv.0708.1831

2007-08-14

Materials Science

Abstract:Ultrasound is a well-established method for particle size reduction in dispersions and emulsions. Ultrasonic processors are used in the generation of nano-size material slurries, dispersions and emulsions because of the potential in the deagglomeration and the reduction of primaries. These are the mechanical effects of ultrasonic cavitation. Ultrasound can also be used to influence chemical reactions by the cavitation energy. This is sonochemistry. As the market for nano-size materials grows, the demand for ultrasonic processes at production level increases. At this stage, energy efficiency becomes important. Since the energy required per weight or volume of processed material links directly to the equipment size required, optimization of the process efficiency is essential to reduce investment and operational costs. Furthermore it is required to scale the lab and bench top configurations to this final level without any variations in the process achievements. Scale up by power alone will not do this.
Principles of ultrasonic agglomeration and its effect on physicochemical and macro- and microstructural properties of foods

Daniela Rivera-Tobar,Mario Pérez-Won,Erick Jara-Quijada,Luis González-Cavieres,Gipsy Tabilo-Munizaga,Roberto Lemus-Mondaca

DOI: https://doi.org/10.1016/j.foodchem.2024.141309

2025-01-15

Abstract:Ultrasonic compaction, also known as ultrasonic agglomeration, is an emerging technology that represents a novel alternative for food agglomeration; it is of great interest to the food industry. This review aims to gather information on the physicochemical, organoleptic, microbiological, and structural changes generated by ultrasound and study the fundamentals of agglomeration and ultrasound in different food matrices. In addition, chemical changes are reported in some nutrients related to conformational changes, such as the disintegration of diacylglycerides into monoacylglycerols, disordering of the crystalline region of starch granules to the amorphous phase, disruption of the membrane in plant cells, and transient or permanent modification of the protein structure (3D folding). The increasing development of patents can provide an insight into the potential of ultrasonic agglomeration applications in the food industry.
The application of power ultrasound to the surface cleaning of silica and heavy mineral sands

A.D. Farmer,A.F. Collings,G.J. Jameson

DOI: https://doi.org/10.1016/s1350-4177(00)00057-2

IF: 9.336

2000-10-01

Ultrasonics Sonochemistry

Abstract:Power ultrasound may be used in the processing of minerals to clean their surfaces of oxidation products and fine coatings, mainly through the large, but very localised, forces produced by cavitation. Results of the application of power ultrasound to remove iron-rich coatings from the surfaces of silica sand used in glass making and to improve the electrostatic separation of mineral sand concentrates through lowering the resistivity of the conducting minerals (ilmenite and rutile) are presented. Parameters affecting ultrasonic cleaning, such as input power and levels of reagent addition, are discussed. In particular, we present data showing the relationship between power input and the particle size of surface coatings removed. This can be explained by the Derjaguin approximation for the energy of interaction between a sphere and a flat surface.

chemistry, multidisciplinary,acoustics
Effects of Ultrasonic Disintegration on Sludge Microbial Activity and Dewaterability

Li Huan,Jin Yiying,Rasool Bux Mahar,Wang Zhiyu,Nie Yongfeng

DOI: https://doi.org/10.1016/j.jhazmat.2008.04.113

IF: 13.6

2009-01-01

Journal of Hazardous Materials

Abstract:Ultrasonic treatment can disintegrate sludge, enhance microbial activity and improve sludge dewaterability at different energy inputs. To find their relationship, the three phenomena during ultrasonic treatment were investigated synchronously, and an experimental model was established to describe the process of ultrasonic sludge disintegration. Analysis results showed that the changes of sludge microbial activity and dewaterability were dependent on sludge disintegration degree during ultrasonic treatment. When sludge disintegration degree was lower than 20%, sludge flocs were disintegrated into micro-floc aggregates and the microbial activity increased over 20%. When sludge disintegration degree was over 40%, most cells were destroyed at different degree, and sludge activity decreased drastically. Only when sludge disintegration degree was 2-5%, sludge dewaterability was improved with the conditioning of FeCl(3). It was also found that the sonication with low density and long duration was more efficient than sonication with high density and short duration at the same energy input for sludge disintegration, and a transmutative power function model can be used to describe the process of ultrasonic disintegration.
Feasibility study on improving the performance of atomization liquid desiccant dehumidifier with standing-wave ultrasound

Zili Yang,Ruiyang Tao,Lu-An Chen,Ke Zhong,Bin Chen

DOI: https://doi.org/10.1016/j.energy.2020.118101

IF: 9

2020-08-01

Energy

Abstract:<p>Liquid desiccant dehumidification systems are promising to increase building energy efficiency. Furthermore, the dehumidification performance can be improved using ultrasound capable of atomizing liquid desiccant into numerous droplets. However, the droplets fall rapidly by gravity and converge into liquid films at the dehumidifier's bottom, reducing the effective transfer time, which is another crucial factor for dehumidification, and the energy efficiency of the ultrasonic system. This study investigated a new and improved method using a standing-wave ultrasound and its levitation effects; using this method, desiccant droplets can be levitated and vibrated in humid air, and thereby, the mass transfer can be increased. The feasibility of the method was carefully verified through comparative experiments within an improved ultrasonic liquid desiccant system (ULDS), which was switched between the conventional traveling-wave and the standing-wave ultrasound. Performance criteria related to the moisture removal rate and specific energy consumption of the ultrasonic system were adopted. We found that the standing-wave ultrasound significantly improved the dehumidification performance of ULDS (by 56% on average) at a negligible additional energy cost. Moreover, low-concentration desiccant solutions become useable, and the ultrasonic device is more energy-efficient in the standing-wave ULDS. This study can aid in improving the dehumidification performance of ULDSs.</p>

energy & fuels,thermodynamics
A Review of Ultrasonic Treatment in Mineral Flotation: Mechanism and Recent Development

Zhang,Du,Hu,Zhang,Song

DOI: https://doi.org/10.3390/molecules29091984

IF: 4.6

2024-04-26

Molecules

Abstract:Ultrasonic treatment has been widely used in the mineral flotation process due to its advantages in terms of operational simplicity, no secondary pollutant formation, and safety. Currently, many studies have reported the effect of ultrasonic treatment on mineral flotation and shown excellent flotation performance. In this review, the ultrasonic mechanisms are classified into three types: the transient cavitation effect, stable cavitation effect, and acoustic radiation force effect. The effect of the main ultrasonic parameters, including ultrasonic power and ultrasonic frequency, on mineral flotation are discussed. This review highlights the uses of the application of ultrasonic treatment in minerals (such as the cleaning effect, ultrasonic corrosion, and desulfuration), flotation agents (such as dispersion and emulsification and change in properties and microstructure of pharmaceutical solution), and slurry (such formation of microbubbles and coalescence). Additionally, this review discusses the challenges and prospects of using ultrasonic approaches for mineral flotation. The findings demonstrate that the application of the ultrasonic effect yields diverse impacts on flotation, thereby enabling the regulation of flotation behavior through various treatment methods to enhance flotation indices and achieve the desired objectives.

chemistry, multidisciplinary,biochemistry & molecular biology
Study of Ultrasonic Treatment of Sludge

Bhola R. Gurjar,Vinay Kumar Tyagi

2003-01-01

Abstract:This paper reviews the mechanisms, results, and current advances of this technology, and briefly discusses potential developments. Under proper operative conditions, ultrasound can quickly alter the sludge structure, release water in the floc, and improve sludge dewaterability and stabilization. High intensity ultrasound can also increase the sludge bio-degradability and biogas production, as well as disinfect pathogens.
Advances in ultrasonic treatment of oily sludge: mechanisms, industrial applications, and integration with combined treatment technologies

Jian Wang,Yujian Lai,Xuemei Wang,Hongbing Ji

DOI: https://doi.org/10.1007/s11356-024-32089-4

IF: 5.8

2024-02-02

Environmental Science and Pollution Research

Abstract:In the petroleum sector, the generation of oily sludge is an unavoidable byproduct, necessitating the development of efficient treatment strategies for both economic gain and the mitigation of negative environmental impacts. The intricate composition of oily sludge poses a formidable challenge, as existing treatment methodologies frequently fall short of achieving baseline disposal criteria. The processes of demulsification and dehydration are integral to diminishing the oil content and reclaiming valuable crude oil, thereby playing a critical role in the management of oily sludge. Among the myriad of treatment solutions, ultrasonic technology has emerged as a particularly effective physical method, celebrated for its diverse applications and lack of resultant secondary pollution. This comprehensive review delves into the underlying mechanisms and recent progress in the ultrasonic treatment of oily sludge, with a specific focus on its industrial implementations within China. Both isolated ultrasonic treatment and its combination with other technological approaches have proven successful in addressing oily sludge challenges. The adoption of industrial-scale systems that amalgamate ultrasound with multi-technological processes has shown marked enhancements in treatment efficacy. The fusion of ultrasonic technology with other cutting-edge methods holds considerable potential across a spectrum of applications. To fulfill the goals of resource recovery, reduction, and neutralization in oily sludge management, the industrial adoption and adept application of a variety of treatment technologies are imperative.

environmental sciences
Low-Frequency, High-Power Ultrasound-Assisted Food Component Extraction

G. Cravotto,A. Binello

DOI: https://doi.org/10.1016/b978-0-08-100294-0.00001-8

2016-01-01

Abstract:Extraction is one of the essential processes in the preparation of key ingredients in the food industry. Choosing the best technology and procedure has a significant impact on food and beverage quality. The development of green technologies for process intensification is a prerequisite to advancing the biorefinery concept and green extraction. The overall goal here is the cost-effective production of high-value food ingredients and the recovery of coproducts from food processing wastes, which sees ultrasound-assisted extraction (UAE) playing a pivotal role. The extraction enhancement provided by low-frequency, high-power ultrasound has been attributed to the propagation of sound pressure waves and resulting cavitation phenomena. High shear forces, generated by cavitation bubble implosion, cause increased extractant mass transfer thanks to intense turbulence, high-velocity interparticle collisions, and perturbation in microporous particles of the biomass, which accelerate both eddy and internal diffusion. Moreover, cavitation on the product surface leads to impingement by microjets that results in surface peeling, erosion, and particle breakdown. These effects expose new surfaces, further increasing mass transfer. The advantages that UAE furnishes include higher yields and a reduction in extraction time, energy consumption, and solvent amounts. Ultrasound energy may also favor extraction selectivity, while reducing thermal gradients and extraction temperature. Unlike some other nonthermal processes, such as high-pressure processing, pulsed electric field processing, and compressed/supercritical carbon dioxide extraction, ultrasound can be easily tested on a laboratory or benchtop scale, generating data suitable for scale up. Intensity and cavitation can be easily adapted to specific extraction processes in order to target specific objectives. Amplitude and pressure can be varied over a wide range and used to identify the most energy efficient extraction setup, while ultrasound can also act synergistically with temperature and pressure to achieve even further benefits. The optimization of UAE operational parameters (sample size, particles size, solvent type, ultrasonic power and frequency, extraction time and temperature, and liquid/solid ratio) is clearly crucial to achieving high efficiency. Optimal conditions can vary dramatically according to the material and analyte of interest. Industrial UAE provides a good return on capital investment, due to the availability of high amplitude/power units for large commercial operations, competitive energy consumption, and low maintenance costs. This long list of reasons makes ultrasound a clear improvement on existing food component extraction processes.This chapter will provide an overview of the most recent advances in, and points of view on, UAE in the food industry in light of changes in consumer lifestyle and expectations as they demand fresher and more natural foods that drives the development of new technologies.
Research on ultrasonic enhancement of water supply sludge settling and dewatering

Yang Jinmei,Zhang Guangming,Wang Wei

DOI: https://doi.org/10.3969/j.issn.1673-9108.2006.11.013

2006-01-01

Abstract:The pretreatment of water supply sludge using ultrasound was studied to improve sludge dewatering characteristics.The changes of sludge SV,specific resistance,and water content of centrifuged sludge were monitored.Ultrasound alone can apparently improve sludge dewatering in very short radiation time and it was much better at 25 kHz than 147.9 kHz.When the energy density was 0.25 W/mL and the ultrasonic time was(3 s,) water content of centrifuged sludge decreased by 4.7%.The optimal ultrasonic energy density was(0.45 W/mL.)The combination of ultrasound with 3 s ultrasonic radiation and coagulant can further reduce the water content of centrifuged sludge and even replace coagulant for settling.
Ultrasonic emulsification: basic characteristics, cavitation, mechanism, devices and application

Chaoqun Yao,Shuainan Zhao,Lixue Liu,Zhikai Liu,Guangwen Chen

DOI: https://doi.org/10.1007/s11705-022-2160-4

IF: 4.803

2022-07-10

Frontiers of Chemical Science and Engineering

Abstract:Emulsion systems are widely applied in agriculture, food, cosmetic, pharmaceutical and biomedical industries. Ultrasound has attracted much attention in emulsion preparation, especially for nanoemulsion, due to its advantages of being eco-friendly, cost-effective and energy-efficient. This review provides an overview for readers to the area of ultrasonic emulsification technology. It briefly introduces and summarizes knowledge of ultrasonic emulsification, including emulsion characteristics, acoustic cavitation, emulsification mechanism, ultrasonic devices and applications. The combination of microfluidics and ultrasound is highlighted with huge advantages in controlling cavitation phenomena and emulsification intensification. A novel scale of dμ C 0.6 / μ D 0.33 − E V is proposed to be able to compare the energy efficiency of emulsion preparation in different devices.

engineering, chemical
Promotion of sludge process reduction using low-intensity ultrasonic treatment

Jianlei Gao,Yan Liu,Yixin Yan,Junfeng Wan,Fan Liu

DOI: https://doi.org/10.1016/j.jclepro.2021.129289

IF: 11.1

2021-11-01

Journal of Cleaner Production

Abstract:Ultrasonication lysis-cryptic growth is an efficient, green method for the source reduction of excess sludge. However, the commonly used high-intensity ultrasound (HIU) suffers from high energy consumption and poor effluent quality. We explored the feasibility of low-intensity ultrasound (LIU) for sludge yield reduction. Batch activity assays indicated that an ultrasound specific energy (Es) of 2000 kJ/kg dry sludge (DS) could increase the dehydrogenase activity of the sonicated sludge by 30%. Further testing of the ultrasonic stimulus using a sequential batch reactor (SBR) showed that LIU reduced the sludge yield rate by 21.53% when the proportion of sonicated sludge (SP) was 20%, without affecting sludge dehydrogenase activity, effluent quality and sedimentation performance. Compared with that obtained with HIU, the sludge reduction rate obtained with LIU was reduced by half, but its energy consumption efficiency (EE) was 4 times higher (0.0606 kg DS/kWh). Repeated ultrasonic experiments confirmed that dehydrogenase activity reached a maximum of 60% after the sludge was sonicated once and decreased rapidly after two or more repeated ultrasonic irradiation cycles. Therefore, LIU application to a portion of the sludge achieved a balance between sludge activity and destruction, thereby promoting sludge reduction without effluent deterioration.

environmental sciences,green & sustainable science & technology,engineering, environmental
Ultrasonic Enhancement for Mineral Flotation: Technology, Device, and Engineering Applications

Xiaoou Zhang,Huaigang Cheng,Kai Xu,Danjing Ding,Xin Wang,Bo Wang,Zhuohui Ma

DOI: https://doi.org/10.3390/min14100986

IF: 2.5

2024-09-30

Minerals

Abstract:In the past five years, the number of articles related to ultrasonic mineral flotation has increased by about 50 per year, and the overall trend is on the rise. The most recent developments in ultrasonics for flotation process intensification are reviewed herein, including effects of ultrasound treatment on an aqueous slurry, improvement in flotation methods and technological processes, device development tracking, and application effects in mineral process engineering. At this point in time, there are pilot-scale flotation tests to evaluate the feasibility of ultrasonic pretreatment technology for industrial use to enhance residue flotation separation, and the results showed that the recovery rate of concentrate is increased by about 10%. Four aspects of ultrasonic flotation process improvement are summarized, namely, changing the ultrasonic parameters, the synergistic effect of ultrasound and reagents, the ultrasonic effect of particles with different-sized fractions, and application to new systems. In addition, the effect of ultrasonic flotation mechanisms is explored through a quadratic model and numerical simulation. The combination of ultrasonic flotation with other fields, such as magnetic fields, to enhance the separation efficiency and recovery of minerals is also a future trend. It is also proposed that ultrasonic flotation technology will be used with big data, industrial Internet of Things, and automatic control technology to achieve deep bundling, optimizing the flotation process by implementing remote monitoring and control of the flotation process.

geochemistry & geophysics,mineralogy,mining & mineral processing

Endoparasitic chiggers. VI. Neoschoengastia esorhina sp. n. (Acarina: Trombiculidae), a second intranasal chigger of birds.

Review on Ultrasonic Disintegration of Heavy/Viscous Oil-bearing Soil

A novel sub-pilot-scale direct-contact ultrasonic dehydration technology for sustainable production of distillers dried grains (DDG)

Sono-physical and Sono-Chemical Effects of Ultrasound: Primary Applications in Extraction and Freezing Operations and Influence on Food Components

Effect of Ultrasonic Pulses on the Functional Properties of Stickwater

Application of High-Power Ultrasound for Dehydration of Vegetables: Processes and Devices

Phase separation technology based on ultrasonic standing waves: A review

On the Development of Emulsion Destabilization Technologies for Dairy Industry

Ultrasonic Production of Nano-Size Dispersions and Emulsions

Principles of ultrasonic agglomeration and its effect on physicochemical and macro- and microstructural properties of foods

The application of power ultrasound to the surface cleaning of silica and heavy mineral sands

Effects of Ultrasonic Disintegration on Sludge Microbial Activity and Dewaterability

Feasibility study on improving the performance of atomization liquid desiccant dehumidifier with standing-wave ultrasound

A Review of Ultrasonic Treatment in Mineral Flotation: Mechanism and Recent Development

Study of Ultrasonic Treatment of Sludge

Advances in ultrasonic treatment of oily sludge: mechanisms, industrial applications, and integration with combined treatment technologies

Low-Frequency, High-Power Ultrasound-Assisted Food Component Extraction

Research on ultrasonic enhancement of water supply sludge settling and dewatering

Ultrasonic emulsification: basic characteristics, cavitation, mechanism, devices and application

Promotion of sludge process reduction using low-intensity ultrasonic treatment

Ultrasonic Enhancement for Mineral Flotation: Technology, Device, and Engineering Applications