Crystalline to amorphous transition of disodium hydrogen phosphate during primary drying

Abira Pyne,Koustuv Chatterjee,Raj Suryanarayanan
DOI: https://doi.org/10.1023/a:1023445905372
Abstract:Purpose: To monitor the phase transitions during freeze-drying of disodium hydrogen phosphate. Methods: The variable temperature sample stage of the X-ray diffractometer (XRD) was attached to a vacuum pump, which enabled the entire freeze-drying process to be carried out in the sample chamber. The phase transitions during the freeze-drying cycle were monitored in real time by XRD. Aqueous buffer solution (containing disodium hydrogen phosphate and sodium dihydrogen phosphate) was cooled at 2 degrees C/min from room temperature to -70 degrees C. It was then heated to -25 degrees C and subjected to primary drying for 2 h at a chamber pressure of approximately 100 mTorr, followed by secondary drying at -10 degrees C. Results: In the frozen solution, disodium hydrogen phosphate had crystallized as the dodecahydrate (Na2HPO4 x 12H2O) as was evident from its characteristic lines at approximately 5.37, 4.27, and 2.81 angstroms. Primary drying for 2 h resulted in ice sublimation, and the complete disappearance of the dodecahydrate peaks. Conclusion: The dehydration of the crystalline dodecahydrate resulted in an amorphous anhydrate. Thus the amorphous nature of the end product is a result of phase transitions during the process and do not reflect the solid-state of the ingredients during the entire process.
What problem does this paper attempt to address?