Improvement of Stable Steering Characteristic of Vehicle Based on Virtual Prototype
CHU Zhi-gang,DENG Zhao-xiang,WANG Pan,HU Yu-mei
DOI: https://doi.org/10.3969/j.issn.1004-731x.2006.01.027
2006-01-01
Abstract:Utilizing Adams,the dynamics virtual prototype of a whole vehicle was established,which was satisfied with the steering stability and ride quality analysis.Based on the model,the law of the stable steering characteristic of vehicle,influenced by changing the stiffness of the front screw spring and the diameter of the lateral stable pole,was discussed.By properly increasing the stiffness of the front screw spring and the diameter of the lateral stable pole,the stable steering characteristic of the vehicle was improved greatly;but with the increasing of the stiffness,the increase rate of the lateral acceleration at neutral steering point decreased rapidly.Further research presented: when the stiffness of the front screw spring increased from 30N/mm to 32.5N/mm and the diameter of the lateral stable pole increased from 20mm to 21mm,the lateral acceleration at neutral steering point also increased from 5.32 m/s2 to 6.18 m/s2,the root mean square value of total weighted acceleration of driver’s seats increased from 0.6027 m/s2 to 0.6268 m/s2;The result shows that the stable steering characteristic of vehicle improves greatly,but the effect on the riding quality is not evident.