Abstract:Developing new energy generation technologies able to effectively convert low‐grade thermal energy into electricity is an urgent necessity to tackle the continuous surge in energy demand and mitigate climate change. Here, a hybrid device that couples triboelectric and thermomagnetic effects to generate electrical power in the presence of small temperature gradients near room temperature is demonstrated. The thermomagnetic effect allows to induce the periodic and sustained motion of a second‐order ferromagnetic material in temperature gradients below 30 °C. This mechanical motion is then converted into electrical energy using a low‐cost triboelectric nanogenerator (TENG). The applicability of this concept is demonstrated in a broad range of operating temperatures in both the cold (15 to 37 °C) and hot (60 to 90 °C) sides. It is further shown that the electrical power generated by the hybrid TENG is more than 35× higher than that obtained by a conventional thermomagnetic generator driven by magnetic induction. The obtained results show that this implementation is a feasible thermal energy conversion technology, further expanding the applicability of triboelectricity into the realm of room temperature thermal harvesting. A self‐sustained energy harvesting device combining triboelectric and thermomagnetic effects is proposed to achieve the conversion of thermal energy into electricity and its working mechanism explains using thermal and electrostatic simulations. Compared with traditional devices driven by magnetic induction, the proposed hybridization leads to a power improvement of over 35×, thus providing a novel application field for triboelectric nanogenerators.

A bimetal and electret-based converter for thermal energy harvesting

Semi-flexible bimetal-based thermal energy harvesters

Bimetal-and-electret-based thermal energy harvesters - Application to a battery-free Wireless Sensor Node

Hybridizing Triboelectric and Thermomagnetic Effects: A Novel Low‐Grade Thermal Energy Harvesting Technology

Dynamic study for performance improvements of a thermo-mechanically bistable heat engine

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Energy conversion system based on Curie effect and triboelectric nanogenerator for low-grade heat energy harvesting

Thermal–Electric Nanogenerator Based on the Electrokinetic Effect in Porous Carbon Film

Heat Recovery Assisted by Thermomagnetic-Electric Conversion

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Harvesting Low Grade Heat to Generate Electricity with Thermosyphon Effect of Room Temperature Liquid Metal

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

A Batteryless Single-Inductor Boost Converter with 190 Mv Self-Startup Voltage for Thermal Energy Harvesting over a Wide Temperature Range.

An Efficient Electrothermal Model of a Thermoelectric Converter for a Thermal Energy Harvesting Process Simulation and Electronic Circuits Powering

A 3.5 mV Input Single-Inductor Self-Starting Boost Converter with Loss-Aware MPPT for Efficient Autonomous Body-Heat Energy Harvesting

Harvesting Low-Grade Heat via Thermal-Induced Electric Double Layer Redistribution of Nanoporous Graphene Films

Three-Terminal Energy Harvester with Coupled Quantum Dots

Energy Conversion from Heat to Electricity by Highly Reversible Phase-Transforming Ferroelectrics

High-efficient energy harvesting architecture for self-powered thermal-monitoring wireless sensor node based on a single thermoelectric generator

Efficient thermal energy harvesting using nanoscale magnetoelectric heterostructures

An Energy Harvester with Temperature Threshold Triggered Cycling Generation for Thermal Event Autonomous Monitoring