Abstract:The study of plant electrophysiology offers promising techniques to track plant health and stress in vivo for both agricultural and environmental monitoring applications. Use of superficial electrodes on the plant body to record surface potentials may provide new phenotyping insights. Bacterial nanocellulose (BNC) is a flexible, optically translucent, and water-vapor-permeable material with low manufacturing costs, making it an ideal substrate for non-invasive and non-destructive plant electrodes. This work presents BNC electrodes with screen-printed carbon (graphite) ink-based conductive traces and pads. It investigates the potential of these electrodes for plant surface electrophysiology measurements in comparison to commercially available standard wet gel and needle electrodes. The electrochemically active surface area and impedance of the BNC electrodes varied based on the annealing temperature and time over the ranges of 50 ∘C to 90 ∘C and 5 to 60 min, respectively. The water vapor transfer rate and optical transmittance of the BNC substrate were measured to estimate the level of occlusion caused by these surface electrodes on the plant tissue. The total reduction in chlorophyll content under the electrodes was measured after the electrodes were placed on maize leaves for up to 300 h, showing that the BNC caused only a 16% reduction. Maize leaf transpiration was reduced by only 20% under the BNC electrodes after 72 h compared to a 60% reduction under wet gel electrodes in 48 h. On three different model plants, BNC–carbon ink surface electrodes and standard invasive needle electrodes were shown to have a comparable signal quality, with a correlation coefficient of >0.9, when measuring surface biopotentials induced by acute environmental stressors. These are strong indications of the superior performance of the BNC substrate with screen-printed graphite ink as an electrode material for plant surface biopotential recordings.

In-Time Detection of Plant Water Status Change by Self-Adhesive, Water-Proof, and Gas-Permeable Electrodes

Study of plant water lack message based on electric property and water potential of leaf

A Wearable and Capacitive Sensor for Leaf Moisture Status Monitoring.

Wearable Electrochemical Sensors for Plant Small-Molecule Detection.

Plant Tattoo Sensor Array for Leaf Relative Water Content, Surface Temperature, and Bioelectric Potential Monitoring

Rapid Fabrication of Wearable Carbon Nanotube/graphite Strain Sensor for Real-Time Monitoring of Plant Growth

Multimodal Plant Healthcare Flexible Sensor System

Cohabiting Plant‐Wearable Sensor In Situ Monitors Water Transport in Plant

Flexible Multimodal Sensors Enhanced by Electrospun Lead-Free Perovskite and PVDF-HFP Composite Form-Stable Mesh Membranes for In Situ Plant Monitoring

Multifunctional Stretchable Sensors for Continuous Monitoring of Long-Term Leaf Physiology and Microclimate

In Situ Fabricated Liquid Metal Capacitors for Plant Sensing

Treefrog‐inspired Flexible Electrode with High Permeability, stable Adhesion, and Robust Durability

Smart Plant-Wearable Biosensor for In-Situ Pesticide Analysis

Natural Plant Materials as Dielectric Layer for Highly Sensitive Flexible Electronic Skin

Preparation of the Composite Yarn PEDOT:PSS/rGO/PAN/DL and Its Application in Sodium-Ion Detection

The Monitoring of Plant Physiology and Ecology: from Materials to Flexible Devices

Liquid metal enabled plant injectable electronics

An integrated plant glucose monitoring system based on microneedle-enabled electrochemical sensor

Evaluating Bacterial Nanocellulose Interfaces for Recording Surface Biopotentials from Plants

A Leaf‐Patchable Reflectance Meter for In Situ Continuous Monitoring of Chlorophyll Content

Low Hysteresis and Fatigue-Resistant Polyvinyl Alcohol/Activated Charcoal Hydrogel Strain Sensor for Long-Term Stable Plant Growth Monitoring