Abstract:Road modelling based on point-cloud data often encounters signal-rejection areas, where the absence of absolute position constraints leads to rapid error accumulation in the constructed map. To mitigate error growth, the manual setting of control points is necessary, which compromises automation in the mapping process and causes a challenging trade-off between efficiency and accuracy. To address these issues, in the present study, we designed a fast and efficient map-construction method that provides absolute pose constraints for simultaneous localisation and mapping (SLAM) based on the bidirectional filter position of global navigation satellite system (GNSS)/inertial measurement unit (IMU) integrated navigation. First, we designed an absolute position constraint factor (BF_Factor) updated at each epoch according to the reference-position difference and time-delay error, which can significantly mitigate error divergence during mobile mapping in a GNSS-rejected region. An adaptive noise model was then constructed for the above factors so that the weights of different factors could be adjusted automatically to achieve a more accurate mapping result. Finally, we conducted experimental tests on the proposed mapping approach in two scenarios that included multiple GNSS-rejected areas. Even when several hundred metres of GNSS signal-obstructed areas were present in the scene, the relocation results indicated that the three-dimensional position error obtained using point-cloud maps was <0.15 m and the pitch/roll error was better than 2°. Compared with Fastlio2 and Fastlio2-SC (Fastlio2 with Scan Context), the proposed method had a better mapping effect and higher mapping accuracy in the aforementioned scenarios. The method proposed in this paper can reduce the human cost in traditional modeling and can provide more rapid and accurate map for related industry applications. The method proposed in this paper can reduce the human cost in traditional modeling and can provide more rapid and accurate map for related industry applications.

Static Map Construction Based on Dense Constraints and Graph Optimization

3D LiDAR Map Compression for Efficient Localization on Resource Constrained Vehicles

Mapbuilding for Dynamic Environments Using Grid Vectors

3D Map Building for Mobile Robot under Unknown Outdoor Environments

Multi-level Map Construction for Dynamic Scenes

Local Optimized and Scalable Frame-to-model SLAM

Crossview Mapping with Graph-based Geolocalization on City-Scale Street Maps

Research on the Construction Method of 3D Dense Map Based on Visual Slam

Map construction algorithm based on dense point cloud

An Effective Way of Constructing Static Map Using 3D LiDAR for Autonomous Navigation in Outdoor Environments

Highly Dynamic Visual SLAM Dense Map Construction Based on Indoor Environments

Static Map Generation from 3D LiDAR Point Clouds Exploiting Ground Segmentation.

Efficient and Low-Drift Point-Cloud Mapping Method for GNSS Weak and Obstructed Areas

Mapping the Static Parts of Dynamic Scenes from 3D LiDAR Point Clouds Exploiting Ground Segmentation

A Novel 3D LiDAR SLAM Based on Directed Geometry Point and Sparse Frame

Automatic Structural Mapping And Semantic Optimization From Indoor Point Clouds

Projection Distance-based Dynamic Objects Removal for 3D Point Cloud Map Construction

Keeping Less is More: Point Sparsification for Visual SLAM

GardenMap: Static Point Cloud Mapping for Garden Environment

Convex Hull Triangle Mesh-Based Static Mapping in Highly Dynamic Environments

An Effective LiDAR-Inertial SLAM-Based Map Construction Method for Outdoor Environments