Abstract:Inertial confinement fusion capsules fielded at the National Ignition Facility are filled with deuterium and tritium fuel by means of a fill tube. The fill tube introduces a low-density pathway into the fuel region of the capsule that allows high Z contaminant to invade the hot spot during the course of the implosion. A recent series of nominally identical high-yield implosions on the NIF has exhibited significant variability in performance. We evaluate the impact of the fill tube in these implosions computationally to determine whether variations in fill tube geometry could have contributed to this variability. The main contrast between the fill tube geometry in the six shots was the outer diameter of the capsule bore hole, a conical hole into which the fill tube is inserted. In our simulations, the geometry of the bore hole can play a significant role in the development of nonlinear flows seeded by the fill tube. We find that the amount of space between the bore hole and the fill tube is the primary factor that determines the amount of contaminant jetted into the hot spot by the fill tube and, in turn, the level of yield reduction due to the fill tube in our simulations. As a consequence, some capsules with 5 μm fill tubes are predicted to outperform capsules with 2 μm fill tubes. We also find that micrometer-scale changes to bore hole size can impact fusion yields by up to four times near the ignition threshold. Nevertheless, simulation trends do not reproduce experimental yield trends, suggesting that the fill tube geometry was not the primary factor contributing to the observed variability in performance and that the fill tube could be masking sensitivity to other asymmetries such as other micrometer-scale capsule defects like voids that were not included in our simulations.

The impact of fill patterns on the fast ion instability in the ILC damping ring

Beam loading effects and microwave instability in the booster ring of a high intensity heavy-ion accelerator facility

Studies of the beam-ion instability and its mitigation with feedback system

International Linear Collider Damping Ring Lattice Design Based on Modified FODO Arc Cells

An Alternative Lattice Design for ILC Damping Ring

International Linear Collider Damping Ring Lattice Design with Two Wiggler Sections

Interplay of space charge, intrabeam scattering, and synchrotron radiation in the Compact Linear Collider damping rings

Suppression of the Fast Beam-Ion Instability by Tune Spread in the Electron Beam due to Beam-Beam Effects

Interplay of space charge, intrabeam scattering and synchrotron radiation in the Compact Linear Collider damping rings

Simulated impact of fill tube geometry on recent high-yield implosions at the National Ignition Facility

Influence of Laser-Induced Au-plasma Plume Collision on the Efficiency of X-Ray Radiations and the Energy-Transport Process Relevant to ICF

Advancing Electron Injection Dynamics and Mitigation Approaches in the Electron-Ion Collider Swap-out Injection Scheme

Implications of beam filling patterns on the design of recirculating Energy Recovery Linacs

Electron Beam Weibel Instability in the Collisionless Shock with Low Mach Number

Terahertz scale microbunching instability driven by nonevaporable getter coating resistive-wall impedance

Impact of bunch intensity asymmetry in colliders featuring strong beamstrahlung

Ion Motion Induced Emittance Growth of Matched Electron Beams in Plasma Wakefields

Equilibrium ion distribution in the presence of clearing electrodes and its influence on electron dynamics

Impact of flow-induced beam deflection on beam propagation in ignition scale hohlraums

Energy Deposition due to Secondary Particles in The Helical Undulator Wall at ILC-250GeV

Study of the Kinetic Effects in Indirect-Drive Inertial Confinement Fusion Hohlraums