Abstract:This work describes the development of graphene oxide‐based nanocomposites functionalized with 3‐aminopropyltrimethoxysilane (GO‐APTMS) and 3‐mercaptopropyltrimehtoxysilane (GO‐MPTS), onto which silver nanoparticles (AgNPs) are grown. These nanocomposites are immobilized onto glassy carbon (GC) electrodes for electrochemical sensing of nitrite ions (NO2−) in various samples. The study involved thorough material characterization and demonstrated that the resulting modified electrodes (GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs) exhibited excellent electrocatalytic activity, displaying wide calibration ranges, low detection limits, high sensitivity, and stability for NO2− determination. Real sample analysis of tomato ketchup validate the sensors′ reliability in detecting nitrite levels in food samples, showcasing potential applications in environmental and food quality monitoring. Nitrite is a significant environmental pollutant present in industrial waste water, food additives, detergents, and physiological systems. Therefore, an effective electrochemical sensor is essential for nitrite determination. Accordingly in this work, graphene oxide (GO) is functionalized with 3‐aminopropyltrimethoxysilane (GO‐APTMS) and 3‐mercaptopropyltrimehtoxysilane (GO‐MPTS). Further, Silver nanoparticles (AgNPs) were grown on GO‐MPTS (GO‐MPTS/AgNPs) and GO‐APTMS (GO‐APTMS/AgNPs). GO‐APTMS/AgNPs and GO‐MPTS/AgNPs are characterized by different spectroscopic and microscopic techniques such as Fourier transform infrared (FT‐IR), UV‐vis and powder X‐ray diffraction(p‐XRD), transmission electron microscopy(TEM) with selected area electron diffraction (SAED) and energy dispersive X‐ray analysis (EDAX). The nanocomposites, GO‐APTMS/AgNPs and GO‐MPTS/AgNPs are immobilized on glassy carbon (GC) electrode and abbreviated as GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs, respectively. It exhibits excellent electrocatalytic activity toward the oxidation of NO2−. It shows the broad calibration range from 0.1 μM to 1 mM. The detection limit for NO2− is 90 nM and 80 nM for GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs, respectively. GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs exhibit sensitivity of 0.26 μA μM−1cm−2 and 0.46 μA μM−1 cm−2, respectively for NO2− determination. The modified electrode, GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs exhibit a wide calibration range, low detection limit, high sensitivity, selectivity, and stability for NO2− determination. Real sample analysis of tomato ketchup was performed at GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs with reliable recovery.

Electrochemical Probe of the Reduced Graphene Oxide Modified by Bare Gold Nanoparticles Functionalized Zr(IV)‐based Metal‐organic Framework for Detecting Nitrite

Copper Nanoparticles Confined in a Silica Nanochannel Film for the Electrochemical Detection of Nitrate Ions in Water Samples

Electrocatalytic oxidation of nitrite using metal-free nitrogen-doped reduced graphene oxide nanosheets for sensitive detection.

Efficient detection of nitrite in water based on an Au/NiO/Rh trimetallic composite modified laser-induced graphene electrode prepared by one-step electrodeposition

Hierarchical composites based on near-spherical ZnO attached on nitrogen-doped reduced graphene oxide for enhanced nitrite electrochemical sensing property

Nitrite Electrochemical Biosensing Based on Coupled Graphene and Gold Nanoparticles

Nonenzymatic Amperometric Sensor for Nitrite Detection Based on a Nanocomposite Consisting of Nickel Hydroxide and Reduced Graphene Oxide

Amperometric determination of nitrite by using a nanocomposite prepared from gold nanoparticles, reduced graphene oxide and multi-walled carbon nanotubes

Detection of Nitrite Based on Ni/Ag/MWNTs Modified Electrode

An ultra-sensitive electrochemical sensing platform based on nanoflower-like Au/ZnO array on carbon cloth for the rapid detection of the nitrite residues in food samples

Synthesis and enhanced electrochemical properties of AuNPs@MoS2/rGO hybrid structures for highly sensitive nitrite detection

Ultrathin 2D/2D nanohybrid for efficient electrochemical detection of nitrite

Synthesis and Electrochemical Properties of Co3O4-rGO/CNTs Composites Towards Highly Sensitive Nitrite Detection

Electrochemically Reduced Graphene Oxide/gold Nanoparticles Composite Modified Screen-Printed Carbon Electrode for Effective Electrocatalytic Analysis of Nitrite in Foods

Simultaneous Detection of Sulfite and Nitrite on Graphene Oxide Nanoribbons‐gold Nanoparticles Composite Modified Electrode

Three-Dimensional Flower-like Nickel Oxide/Graphene Nanostructures for Electrochemical Detection of Environmental Nitrite

In Situ Growth of Silver Nanoparticles on Graphene Oxide Towards Electrochemical Nitrite Detection

Gold nanoparticles decorated bimetallic CuNi-based hollow nanoarchitecture for the enhancement of electrochemical sensing performance of nitrite

Preparation of Cu 2 O/CNTs composite and its application as sensing platform for detecting nitrite in water environment

Pore-Confined Silver Nanoparticles in a Porphyrinic Metal–Organic Framework for Electrochemical Nitrite Detection

A facile fabrication of copper particle-decorated novel graphene flower composites for enhanced detecting of nitrite