Abstract:Novel sheet porous nanocomposites were developed for Cu(II) deep removal form water utilizing waste crop stalks. Hydrated ferric oxide (HFO) was coated onto the surface of sorghum crop stalk (SCS) through a simple and cleaner impregnation-surface deposition method to fabricate the nanocomposite adsorbent SCS-HFO. BET, SEM-EDX, FTIR and XPS characterization proved that HFO with a particle size of 10–50 nm was successfully loaded on the sorghum stalk surface. High level of coexisting cations such as Na + , Mg 2+ and Ca 2+ in aqueous solution had little influence on the Cu 2+ adsorption capacity, showing that SCS-HFO had excellent adsorption selectivity. The adsorption of Cu 2+ onto SCS-HFO fitted to Langmuir isothermal model, and the adsorption process conformed to the quasi-secondary kinetics, which indicates that monolayer chemical adsorption is dominant. The fixed-bed column of SCS-HFO could effectively reduce the Cu 2+ concentration in 6.8 L of simulated wastewater to less than 0.01 mg/L. The NaCl-NH 3 ·H 2 O mixed solution can regenerate SCS-HFO, and the adsorption efficiency of SCS-HFO still reaches more than 90 % after multiple adsorption-desorption cycles, indicating good stability of the prepared material. This study successfully constructed and fabricated a green and cost-effective nanocomposite adsorbent based on agricultural waste.

Sheet nanocomposites of sorghum stalk loaded with hydrated ferric oxide for Cu(II) deep removal from water