Abstract:The world is undergoing energy transformation in various If global carbon neutrality is to be achieved by 2050, energy generation must improve. Here, we explore whether hydrogen and ammonia co-firing with natural gas (NG) in an industrial gas turbine improved the environmental performance of existing combined cycle power plants. Combustion tests were performed at atmospheric pressure under various conditions to define the safe operating range of a combustion test rig equipped with a real-world gas turbine combustor (501F). The combustion characteristics were evaluated under co-firing with hydrogen at 15–30% by volume, and NG, from partial to full load conditions based on heat rate. As the co-firing hydrogen ratio increased, the metal temperature of a specific part of the combustor liner (the basket) tended to rise. The NOx emissions remained at about 20 ppm from partial to full load. Still, the NO2/NOx ratio was higher under partial load than full load due to NO oxidation by HO2 radicals at the low-temperature flame region at part load. This ratio also increased as the proportion of hydrogen rose, which was attributable to the higher HC radicals produced by adding H2 fuel. Experiments with ammonia were conducted only during partial loading. Unlike hydrogen, the flame position (reaction zone) in the combustor moved slightly downstream, given the low reactivity of ammonia. In terms of emissions, if even a tiny amount (5% vol) of ammonia was supplied, the NOx emission level exceeded 600 ppm because of fuel NOx. The Thermal NOx Mechanism, which analyzes the generation of trace amounts of NOx in the flame field, which was applied during hydrogen co-firing, is unsuitable for ammonia fuels. Therefore, we tried to quantitatively analyze the effect of fuel-borne nitrogen according to the increase in the co-firing ammonia ratio. Based on this, a nitrogen oxide reduction strategy was proposed when the ammonia was applied in an actual gas turbine. Due to additional fuel reactivity, the pattern factors associated with the lives of high-temperature parts (turbine blades and vanes) slightly changed. Hydrogen, which is highly reactive, reduced the flame and formed local hot spots, while ammonia showed the opposite tendency with a low heat release rate. Thus, we explored parameters that limited operation. This represents the first step toward creating guidelines for safe operation when various carbon-free fuels are used under multiple loading conditions.

Ammonia fired gas turbines: Recent advances and future perspectives

A Comparative Environmental Life Cycle Assessment of the Combustion of Ammonia/Methane Fuels in a Tangential Swirl Burner

Ammonia as fuel for Gas Turbine

Novel ammonia-driven chemically recuperated gas turbine cycle based on dual fuel mode

Review on the Ammonia-Blend As an Alternative Fuel for Micro Gas Turbine Power Generation

Thermal Ammonia Decomposition for Hydrogen‐Rich Fuel Production and the Role of Waste Heat Recovery

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

International Conference on Applied Energy – ICAE 2015 Ammonia , Methane and Hydrogen for Gas Turbines

Advancements in Green Ammonia Production and Utilisation Technologies

Hydrogen-fueled gas turbines in future energy system

Comparison of Hydrogen and Ammonia Co-Firing With Natural Gas Using a Practical Gas Turbine Combustor (501F) Under Atmospheric Conditions: Changes in Metal Temperature, Pattern Factor, and NOx Emission

Recent Advances in Ammonia Combustion Technology in Thermal Power Generation System for Carbon Emission Reduction

Ammonia as a green energy carrier: Electrochemical synthesis and direct ammonia fuel cell - a comprehensive review

Ammonia as Green Fuel in Internal Combustion Engines: State-of-the-Art and Future Perspectives

Flame stabilization and emission characteristics of ammonia combustion in lab-scale gas turbine combustors: Recent progress and prospects

Advances in power generation from ammonia via electrocatalytic oxidation in direct ammonia fuel cells

In-cylinder thermochemical fuel reforming for high efficiency in ammonia spark-ignited engines through hydrogen generation from fuel-rich operations

Advancements in Thermocatalytic Ammonia Decomposition for Hydrogen Production

A Review of Current Advances in Ammonia Combustion from the Fundamentals to Applications in Internal Combustion Engines

Renewable Ammonia for Global Energy Transition

Techno-economic analysis of ammonia cracking for large scale power generation