Abstract:The laser welding of dissimilar 2219 Al–Cu and 2195 Al–Li alloys is a significant attempt in the fabrication of rocket propellant tanks, aiming at the escalating demands for weight reduction and cost efficiency. The variances in microstructure evolution for 2219/2195 aluminum alloys laser welded joint deserves thorough investigation because it certainly results in the discrepancies in mechanical property In this paper, the temperature field, microstructure, element distribution, grain orientation, and texture on both sides of the laser welded joint were comprehensively investigated through a combination of simulations and experiments. The tensile strength was tested and the fracture mechanism was analyzed based on the microstructure characteristic. It is found that the wider columnar dendrites zone is generated due to the large temperature gradient from on the 2195 Al–Li alloy side. The grain orientation of the non-dendrite equiaxed zone (EQZ) and columnar grain near the fusion line are significantly influenced by the grain orientation of base metal (BM). On the one side of 2195 Al–Li alloy, the majority of grains feature diameters predominantly within the 3–6 μm range. The region in the vicinity of fusion line on one side of the 2195 Al–Li alloy has the weakest performance. It is deduced that the poor tensile property on one side of the 2195 Al–Li alloy is not only attributed to the loss of Mg and Li elements, but also owing to the evolution of texture. The rotated goss texture with high intensity is formed in EQZ near the fusion line on one side of 2219 Al–Cu alloy.

Study on the Microstructure and Corrosion Behavior of Dissimilar Aluminum Alloy Welded Joints Formed Using Laser Welding

The microstructure-corrosion relationships in laser-welded dissimilar steel-to-aluminium joints

Modifying Microstructures and Mechanical Properties of Laser-Arc Welded Joints of Dissimilar Advanced Aluminum Alloys

Microstructural and Electrochemical Characterization of Aluminum / Steel Joints Conducted by Dual-Beam Laser

Corrosion Behavior of a Laser-MIG Hybrid Welding-Brazing Joint of 6061 Aluminum Alloy to SUS304 Stainless Steel

Microstructural, Porosity and Mechanical Properties of Lap Joint Laser Welding for 5182 and 6061 Dissimilar Aluminum Alloys under Different Place Configurations

Microstructure, Texture and Mechanical Properties of 6061 Aluminum Laser Beam Welded Joints

Investigation on Microstructure and Mechanical Properties of the Dissimilar Lap Welding of Al Alloy to Steel with Different Filler Materials and Laser Powers

Unravelling Asymmetrical Microstructure Evolution and Tensile Fracture Mechanism in Laser Welding of Dissimilar 2219/2195 Aluminum Alloys

Hybrid laser welding of dissimilar aluminum alloys: welding processing, microstructure, properties and modelling

Solidification microstructures and softening behavior of laser welded 6082-A356 aluminum alloy dissimilar butt joints

Experimental investigations on mechanical properties of AA6061-T6 aluminum alloy joined by laser welding using digital image correlation

Microstructure and mechanical properties of 6061 aluminum alloy laser-MIG hybrid welding joint

Microstructure and Mechanical Properties of TC4/6061 and TC4/2024 Dissimilar Joints by Autogenous Laser Welding-Brazing

Microstructure and Mechanical Properties of Stainless Steel/6082 Aluminum Alloy Heterogeneous Laser Welded Joint

Microstructure and mechanical properties of laser beam welding 6061 aluminum alloy with different states

Microstructure and Local Corrosion Behavior of Electron Beam Welding Joints of 5a06 Aluminum Alloys

Microstructure and Mechanical Properties of Pulsed Laser Welded Al/steel Dissimilar Joint

Microstructural characteristics and mechanical properties of laser-welded copper and aluminum

Study on the Morphology, Microstructure, and Properties of 6082-T6 Aluminum Alloy Joints in MIG Welding

Tensile resistance, microstructures of intermetallic compounds, and fracture modes of welded steel/aluminum joints produced using laser lap welding