Abstract:In the modern world, many products are disposable or have a very short lifespan, while at the same time, those products are made from materials that will remain in the environment in the form of waste for hundreds or even thousands of years. It is a serious problem; non-biodegradable polymer wastes are part of environmental pollution and generate microplastics, which accumulate in the organisms of living beings. One of the proposed solutions is biodegradable polymers and their composites. In our work, three types of polylactide-based composites with plant-derived fillers: microcellulose powder, short flax fibers, and wood flour at 2 wt.% were prepared. Poly(lactic acid) (PLA)-based biocomposite properties were characterized in terms of mechanical and surface properties together with microscopic analysis and Fourier-transform infrared spectroscopy (FTIR), before and after a UV (ultraviolet)-light-aging process to determine the effects of each cellulose-based additive on the UV-induced degradation process. This research shows that the addition of a cellulose additive can improve the properties of the material in terms of the UV-aging process, but the form of the chosen cellulose form plays a crucial role in this case. The testing of physicochemical properties demonstrated that not only can mechanical properties be improved, but also the time of degradation under UV light exposure can be controlled by the proper selection of the reinforcing phase and the parameters of the extrusion and injection molding process. The obtained results turned out to be very interesting, not only in terms of the cost reduction of the biocomposites themselves, as mainly the waste from the wood industry was used as a low-cost filler, but also that the additive delays the aging process occurring during UV light exposure. Even a small, 2 wt.% addition of some of the tested forms of cellulose delayed surface degradation, which is one of the most important factors affecting the biodegradation process.

Photo-oxidative resistance and adjustable degradation of poly-lactic acid (PLA) obtained by biomass addition and interfacial construction

A green way to simultaneously enhance the mechanical, flame retardant and anti-ultraviolet aging properties of polylactide composites by the incorporation of tannic acid derivatives

Novel Strategy to Interpret the Degradation Behaviors and Mechanisms of Bio- and Non-Degradable Plastics

Synergistic modification of polylactic acid by oxidized straw fibers and degradable elastomers: A green composite with good strength and toughness

Construction of highly ductile, UV-shielding polylactide/poly(butylene adipate- co -terephthalate) biocomposites with hyperbranched polysiloxane functionalized lignin as a biocompatibilizer

Analysis of the Effect of Photo and Hydrodegradation on the Surface Morphology and Mechanical Properties of Composites Based on PLA and PHI Modified with Natural Particles

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

Life cycle design of fully bio-based poly(lactic acid) composites with high flame retardancy, UV resistance, and degradation capacity

Modified Biomass-Reinforced Polylactic Acid Composites

Aging Process of Biocomposites with the PLA Matrix Modified with Different Types of Cellulose

Flame-retardant and UV-shielding poly (lactic acid) composites with preserved mechanical properties by incorporating cyclophosphazene derivative and phosphorus-modified lignin

Improving the flame retardancy and accelerating the degradation of poly (lactic acid) in soil by introducing fully bio-based additives

Effect of polycarbodiimide, epoxy chain extenders and tannic acid on the hydrolysis and UV resistance of polylactic acid

A new strategy for the preparation of polylactic acid composites with flame retardancy, UV resistance, degradation, and recycling performance

STUDY ON PREPARATION AND PROPERTIES OF ANTI-ULTRAVIOLET AGING WOOD-PLASTIC COMPOSITES

Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films

Preparation and Mechanism of Toughened and Flame-Retardant Bio-Based Polylactic Acid Composites

The degradation investigation of biodegradable PLA/PBAT blend: Thermal stability, mechanical properties and PALS analysis

Effect of silane coupling agent on the ultraviolet weathering behavior of polylactic acid based composites

Quantitative CT with finite element analysis: towards a predictive tool for bone remodelling around an uncemented tapered stem

Influence of bio-coupling agent on interfacial interlocking compatibility and toughness of ultrafine bamboo charcoal/polylactic acid composite film