Abstract:The microbial oxidation of methane in engineered cover soils is considered a potent option for the mitigation of emissions from old landfills or sites containing wastes of low methane generation rates. A laboratory column study was conducted in order to derive design criteria that enable construction of an effective methane oxidising cover from the range of soils that are available to the landfill operator. Therefore, the methane oxidation capacity of different soils was assessed under simulated landfill conditions. Five sandy potential landfill top cover materials with varying contents of silt and clay were investigated with respect to methane oxidation and corresponding soil gas composition over a period of four months. The soils were compacted to 95% of their specific proctor density, resulting in bulk densities of 1.4-1.7 g cm(-3), reflecting considerably unfavourable conditions for methane oxidation due to reduced air-filled porosity. The soil water content was adjusted to field capacity, resulting in water contents ranging from 16.2 to 48.5 vol.%. The investigated inlet fluxes ranged from 25 to about 100g CH(4)m(-2)d(-1), covering the methane load proposed to allow for complete oxidation in landfill covers under Western European climate conditions and hence being suggested as a criterion for release from aftercare. The vertical distribution of gas concentrations, methane flux balances as well as stable carbon isotope studies allowed for clear process identifications. Higher inlet fluxes led to a reduction of the aerated zone, an increase in the absolute methane oxidation rate and a decline of the relative proportion of oxidized methane. For each material, a specific maximum oxidation rate was determined, which varied between 20 and 95 g CH(4)m(-2)d(-1) and which was positively correlated to the air-filled porosity of the soil. Methane oxidation efficiencies and gas profile data imply a strong link between oxidation capacity and diffusive ingress of atmospheric air. For one material with elevated levels of fine particles and high organic matter content, methane production impeded the quantification of methane oxidation potentials. Regarding the design of landfill cover layers it was concluded that the magnitude of the expected methane load, the texture and expected compaction of the cover material are key variables that need to be known. Based on these, a column study can serve as an appropriate testing system to determine the methane oxidation capacity of a soil intended as landfill cover material.

The long-term evolution of and transport processes in a self-sustained final cover on waste deposits

Evaluation of Methane Oxidation Activity in Waste Biocover Soil During Landfill Stabilization.

Experimental Investigation on Shear Strength and Permeability of a Deeply Dewatered Sewage Sludge for Use in Landfill Covers

Low O2 Level Enhances CH4-derived Carbon Flow into Microbial Communities in Landfill Cover Soils

Responses of Methanotrophic Activity, Community and EPS Production to CH4 and O2 Concentrations in Waste Biocover Soils.

Characterization of H2S Removal and Microbial Community in Landfill Cover Soils

Methane Oxidation in Landfill Waste Biocover Soil: Kinetics and Sensitivity to Ambient Conditions

Numerical Analysis of Moisture and Gas Transport in Earthen Final Covers Considering Effects of Vapor and Temperature Gradient

Anti-seepage performance and oxygen barrier performance of the three-layered landfill cover system comprising neutralized slag under extreme climate conditions

An Analytical Model for Contaminant Transport in Landfill Liner with Fluctuating Leachate Head

Long-term observations on the hydraulic performance of a combined capillary barrier-methane oxidation landfill cover system

Field Study on the Efficiency of a Methane Degradation Layer Composed of Fine Fraction Soil from Landfill Mining

Life cycle analysis of common landfill final cover systems focusing on carbon neutrality

Mechanism of H2S Removal During Landfill Stabilization in Waste Biocover Soil, an Alterative Landfill Cover.

Evolution of solidified municipal sludge used as landfill cover material under wet–dry cycles: mechanical characteristics, microstructural, and seepage properties

Microbiology of a multi-layer biosolid/desulfurized tailings cover on a mill tailings impoundment

Use of Loess As Final Cover Materials for MSW Landfills in Northwest China

Assessment of the methane oxidation capacity of compacted soils intended for use as landfill cover materials

A steady-state analytical model for coupled methane transport and oxidation in vegetated landfill cover soil

Long-term field performance of non-vegetated and vegetated three-layer landfill cover systems using construction waste without geomembrane