Abstract:Phase change material such as paraffin wax has very low thermal conductivity which leads to many defects upon its practical utilization in thermal energy storage system. In this paper, study on paraffin/expanded graphite (EG) composite has been carried out to enhance the thermal conductivity of pure paraffin (base material). EG (supporting material) with its worm-like structure has been introduced as thermal conductivity enhancer in paraffin/EG composite. A type of paraffin wax with melting temperature (Tm = 60-62 °C) has been investigated. Three samples of paraffin/EG composite have been prepared with weight percentage of EG as 5%, 10% and 15%. Self-absorption technique has been introduced by preparing the samples in a cylindrical vessel at temperature slightly more than melting temperature of paraffin for a certain period of time until maximum incorporation of paraffin wax was achieved into the porous structure of expanded graphite. Thermal characteristics have been investigated by differential scanning calorimeter which showed no change in the melting temperature of base material, however a slight change in phase transition temperature was observed, and measured latent heat of the composite was a little lower than theoretical latent heat. Thermal conductivity of each sample of paraffin/EG composite determined by laser flash method has been achieved 4 times, 6 times and 6.5 times higher than that of pure paraffin for 5%, 10% and 15% paraffin/EG composite, respectively, and as quantity of EG was increased, thermal conductivity of the composite got increased as well. Results obtained by scanning electron microscopy indicated uniform mingling of paraffin wax and expanded graphite in the composite. Form-stability has been confirmed through liquid leakage test which showed no leakage of paraffin from composite. This work is equally significant to be engaged in thermal energy storage systems, cooling of electronic devices and thermal management of batteries.

Rheological aspects of solid-to-liquid phase transitions in paraffin wax/bitumen blends for thermal energy storage applications

Study on Miscibility, Thermomechanical Behavior, and Thermoregulation Performance of Paraffin Wax/Bituminous Blends for Solar Thermal Energy Storage Applications

Paraffin /poly(methyl Methacrylate) Blends As Form-Stable Phase Change Materials for Thermal Energy Storage

Preparation and Characterization of Poly (Mma-Co-aa)/paraffin Microencapsulated Phase Change Material for Thermal Energy Storage

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

Preparation and Properties of Thermal Energy Storage and Temperature Regulation Microcapsulated Paraffin by P(MMA-co-AA)

Advanced thermal systems driven by paraffin-based phase change materials – A review

Thermo-physical properties of paraffin wax with iron oxide nanoparticles as phase change material for heat storage applications

Calculation of phase equilibrium and phase change dynamics of blended paraffin

Expanded Graphite As Thermal Conductivity Enhancer for Paraffin Wax Being Used in Thermal Energy Storage Systems

Thermal characteristics enhancement of Paraffin Wax Phase Change Material (PCM) for thermal storage applications

Correlation Between Phase Separation and Rheological Behavior in Bitumen/sbs/pe Blends

Preparation and Thermal Characterization of Hollow Graphite Fibers/Paraffin Composite Phase Change Material

Improving the phase change properties of paraffin wax by regulating the pore structure and surface properties of silica aerogel

EXPERIMENTAL STUDY ON THE THERMAL PERFORMANCE OF PARAFFIN

Thermal Energy Storage System Using a Technical Grade Paraffin Wax as Latent Heat Energy Storage Material

Study on Thermal Properties of Graphtie/Paraffin Composites As Phase Change Heat Storage Material

Experimental Study on Paraffin Wax and Soya Wax Supported by High-Density Polyethylene and Loaded with Nano-Additives for Thermal Energy Storage

Preparation of Silica Microcapsules Containing Phase Change Paraffin Wax

Preparation of Phase Change Material Emulsions with Good Stability and Little Supercooling by Using a Mixed Polymeric Emulsifier for Thermal Energy Storage

Epoxy Phase-Change Materials Based on Paraffin Wax Stabilized by Asphaltenes