Abstract:We have demonstrated simultaneous laser frequency stabilization of a UV and IR laser, to the same spectroscopic sample, by monitoring only the absorption of the UV laser. For trapping and cooling Yb$^{+}$ ions, a frequency stabilized laser is required at 369.95nm to drive the $^{2}S_{1/2}$ $ \rightarrow $ $ ^{2}P_{1/2}$ cooling transition. Since the cycle is not closed, a 935.18nm laser is needed to drive the $^{2}D_{3/2}$ $\rightarrow$ $^{3}D_{[3/2]1/2}$ transition which is followed by rapid decay to the $^{2}S_{1/2}$ state. Our 369nm laser is locked to Yb$^{+}$ ions generated in a hollow cathode discharge lamp using saturated absorption spectroscopy. Without pumping, the metastable $^{2}D_{3/2}$ level is only sparsely populated and direct absorption of 935nm light is difficult to detect. A resonant 369nm laser is able to significantly populate the $^{2}D_{3/2}$ state due to the coupling between the levels. Fast re-pumping to the $^{2}S_{1/2}$ state, by 935nm light, can be detected by observing the change in absorption of the 369nm laser using lock-in detection of the photodiode signal. In this way simultaneous locking of two optical frequencies in very different spectral regimes is accomplished. A rate equation model gives good qualitative agreement with the experimental results. This technique offers improved laser frequency stabilization compared to lasers locked individually to the sample and should be readily applicable to similar ion systems.

Frequency-stabilization to 6x10^-16 via spectral-hole burning

Temperature-dependent mechanical losses of Eu$^{3+}$:Y$_{2}$SiO$_{5}$ for spectral hole burning laser stabilization

Laser Frequency Stabilization by Combining Modulation Transfer and Frequency Modulation Spectroscopy

Using slow light to enable laser frequency stabilization to a short, high-Q cavity

Thermal-noise Limits to the Frequency Stability of Burned Spectral Holes

Frequency Stabilization of a 1083 Nm Fiber Laser to 4he Transition Lines with Optical Heterodyne Saturation Spectroscopies

Compact Frequency-Stabilization Scheme for Laser Cooling of Polar Molecules

External Cavity Diode Laser with Long-Term Frequency Stabilization Based on Mode Boundary Detection

Double-heterodyne probing for ultra-stable laser based on spectral hole burning in a rare-earth doped crystal

Ultra-stable 1064-nm neodymium-doped yttrium aluminum garnet lasers with 2.5 × 10-16 frequency instability

Frequency Stabilization of a 214.5-Nm Ultraviolet Laser

Laser Frequency Stabilization Using Folded Cavity and Mirror Reflectivity Tuning

Laser Frequency Instability of 6X10-16 Using 10-Cm-long Cavities on a Cubic Spacer

Locking the frequency of lasers to an optical cavity at the $1.6 \times 10^{-17}$ relative instability level

Shifts of optical frequency references based on spectral-hole burning in Eu:Y2SiO5

Ultralow-frequency-noise Stabilization of a Laser by Locking to an Optical Fiber-Delay Line.

Laser frequency stabilization by modulation transfer spectroscopy and balanced detection of molecular iodine for laser cooling of ^174Yb

Laser frequency stabilization by modulation transfer spectroscopy and balanced detection of molecular iodine for laser cooling of ${}^{174}$Yb

Multi-Wavelength Narrow-Spacing Laser Frequency Stabilization Technology Based on Fabry-Perot Etalon

Robust frequency stabilization and linewidth narrowing of a laser with large intermittent frequency jumps using an optical cavity and an atomic beam

Coupled Optical Resonance Laser Lockin