Abstract:The central solenoid (CS) is the heart of the ITER tokamak and serves as a critical element in the ITER magnet system. The CS consists of six large high field superconducting magnets (Modules) approximately 4 meters in diameter and 2 meters tall that weigh approximately 110 metric tonnes each. The central solenoid modules (CSM) are being fabricated and tested at a manufacturing site in Poway, California. Upon completion of each module, they will be shipped from California, USA to the ITER facility in Cadarache, France by both land (girder truck) and ocean (freighter). The structurally flexible Helium (He) piping system and temporary instrumentation cable spool racks will experience deformations and stresses from a wide range of transport accelerations (harmonic and shock-type excitation). Design-basis static accelerations are adopted from applicable codes which envelop both land and water transport. Two finite element (FE) models developed in ANSYS are used to simulate the effects of these static accelerations on the CSM. Rigid body dynamics fundamentals help identify the importance of excitation and natural frequencies, shock load duration and transmissibility. Modal analysis estimates the response of the piping system to harmonic loads. Shock load transmission to the piping and spool rack are also assessed. FE models of the CSM He piping system and cable spool rack provide stress results developed from applied accelerations. The paper describes the assessments performed on the CSM piping and cable storage systems for various transport loads, prior to the shipment of the first CSM. Furthermore, the acceleration data collected from the successful transport of first three modules are evaluated with respect to implications for the CSM transport loads.

Move of a large but delicate apparatus on a trailer with air-ride suspension

Experimental Study of a Solid-Nitrogen-Cooled HTS Magnet for Superconducting Linear Synchronous Motors

Design and analysis of the Agile Robot Transporter for ITER in-vessel maintenance

Structural Qualification of ITER Central Solenoid Module during Transport from California, USA to ITER Site

Rigid-flexible Hybrid Modeling and Dynamic Simulation of Three-Coordinate Heavy-Load Transfer Vehicle

Design and Analysis of Mechanical Structure for On-Board HTS Magnets Subjected to High Acceleration

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Fusion of Computer Vision and Piezoelectric Tactility Approach to Measuring Moving Vehicle Loads

Vehicle Structural Design and Analysis in Maglev Experimental Line

Structural Dynamics Modeling of an On-Board HTS Magnet Prototype Cooled by Solid Nitrogen for High-Speed Maglev Trains

Levitation Force of Small Clearance Superconductor–magnet System under Non-Coaxial Condition

Design Study of a High Loading Superconducting Magnetically Levitated Planar Motor

Evaluation of the Structural Dynamics of a 2G HTS Magnet System Considering Electromagnetic and Thermal Stress

Performance Analysis of a New Adjustable Superconducting Magnet Suspension System

Method and Process of Mechanical Evaluation of a 2G HTS Magnet System for Maglev Applications

Multi-physics Analysis of Permanent Magnet Tubular Linear Motors under Severe Volumetric and Thermal Constraints

Research on building cryo-compressed test condition on large CcH 2 vessel for heavy-duty fuel cell trucks

Influence of medium load on vibration response of transportation pipelines

Cryogenic and safety design of the future high field cable test facility at Fermilab

Magnetic Conduction Structure Design and Charging Test of a Linear-Motor Type Flux Pump for Through-Dewar Excitation of High Temperature Superconducting Motors

AGV Motion Balance and Motion Regulation Under Complex Conditions