Abstract:We focus on preventing collisions between debris and debris, for which there is no current, effective mitigation strategy. We investigate the feasibility of using a medium-powered (5 kW) ground-based laser combined with a ground-based telescope to prevent collisions between debris objects in low-Earth orbit (LEO). The scheme utilizes photon pressure alone as a means to perturb the orbit of a debris object. Applied over multiple engagements, this alters the debris orbit sufficiently to reduce the risk of an upcoming conjunction. We employ standard assumptions for atmospheric conditions and the resulting beam propagation. Using case studies designed to represent the properties (e.g. area and mass) of the current debris population, we show that one could significantly reduce the risk of nearly half of all catastrophic collisions involving debris using only one such laser/telescope facility. We speculate on whether this could mitigate the debris fragmentation rate such that it falls below the natural debris re-entry rate due to atmospheric drag, and thus whether continuous long-term operation could entirely mitigate the Kessler syndrome in LEO, without need for relatively expensive active debris removal.
What problem does this paper attempt to address?
### Problems the paper attempts to solve
The paper aims to solve the problem of collisions between orbital debris. Specifically, the author focuses on how to prevent collisions between orbital debris, as there are currently no effective mitigation strategies for this type of collision. The paper explores the feasibility of using a medium - power (5 - kilowatt) ground - based laser combined with a ground - based telescope to prevent collisions between debris objects in low - Earth orbit (LEO). By using photon pressure to change the debris orbit, multiple operations can significantly reduce the risk of upcoming close - approach events.
### Background and motivation
As the predictions of satellite environmental distribution models are confirmed, the threat of catastrophic or disabling collisions between orbital debris is receiving increasing attention. Early satellite environmental distribution models showed that due to the collision rate between orbital debris exceeding the natural decay rate, "Kessler Syndrome" may be formed, that is, a series of chain reactions lead to the formation of a debris belt (Kessler & Cour - Palais, 1978). Recorded collision events (such as the Iridium 33/Cosmos 2251 collision in January 2009) and further environmental modeling have confirmed the instability of the debris population in low - Earth orbit (LEO). Kessler Syndrome may already have occurred in certain orbits, even under the assumption of no new launches (Liou & Johnson, 2008, 2009).
In order to contain the runaway growth of debris in the most crowded orbital regions (such as low - Earth sun - synchronous orbit), in addition to the debris mitigation guidelines of the United Nations Committee on the Peaceful Uses of Outer Space (UN COPUOS), collision avoidance (COLA) and active debris removal (ADR) measures are also required (Liou & Johnson, 2009). Although collision avoidance for active spacecraft can reduce the growth of debris, this alone is not sufficient to offset the growth of collisions between debris (Liou, 2011). In order to stabilize the current level of the LEO environment, at least 5 large debris objects need to be removed each year in the future (in addition to achieving 90% of the post - retirement treatment guidelines) (Liou & Johnson, 2009).
### Proposed solution
The paper proposes a laser system using photon momentum transfer to avoid collisions between orbital debris. This method uses photon pressure as a propulsive force and can be traced back to the first detailed technical study of the solar sail concept (Garwin, 1958). The concept of using a laser for photon - pressure propulsion was first proposed by Forward (1962). For collision - avoidance applications, applying a 1 - centimeter - per - second velocity change along the orbital direction can move a debris object in low - Earth orbit by 2.5 kilometers within a day. Such a small impulse can be achieved through photon momentum transfer, greatly reducing the power and complexity requirements of the ground - based laser system. In addition, this also reduces the possibility of the laser system accidentally damaging active satellites or being regarded as a weapon.
### System design
The paper describes a baseline system that uses a 5 - to 10 - kilowatt continuous - wave laser, installed on a 1.5 - meter - diameter fast - slewing optical telescope, and equipped with adaptive optics and a sodium guide star to ensure that the laser beam is continuously focused and directed throughout the target pass.
### Methodology
To evaluate the feasibility of the laser - radiation - pressure - based collision - avoidance scheme, the paper simulates orbital perturbations in different case studies. Laser radiation introduces an additional force into the equations of motion of the irradiated debris, and these equations are solved by a standard high - precision orbit propagator. Applying a small velocity change along the orbital direction changes the specific energy of the orbit, thereby reducing or increasing its semi - major axis and changing its period (as shown in Figure 1). This allows the debris object to be repositioned in its orbit, allowing for rapid displacement along the orbital direction to grow over time.
### Results and potential applications
The paper demonstrates the effectiveness of this laser system through case studies, summarizes potential applications, and points out directions for further research. The research shows that using this laser system can significantly reduce the risk of nearly half of the catastrophic collisions involving debris. If continuously operated for a long time, this system has the potential to completely mitigate Kessler Syndrome in low - Earth orbit without the relatively expensive active debris removal.
### Formulas
1. **Radiation pressure formula**:
\[
\frac{F}{A}=C_r\times\frac{