Abstract:A polymer network can imbibe water, forming an aggregate called hydrogel, and undergo large and inhomogeneous deformation with external mechanical constraint. Due to the large deformation, nonlinearity plays a crucial role, which also causes the mathematical difficulty for obtaining analytical solutions. Based on an existing model for equilibrium states of a swollen hydrogel with a core-shell structure, this paper seeks analytical solutions of the deformations by perturbation methods for three cases, i.e. free-swelling, nearly free-swelling and general inhomogeneous swelling. Particularly for the general inhomogeneous swelling, we introduce an extended method of matched asymptotics to construct the analytical solution of the governing nonlinear second-order variable-coefficient differential equation. The analytical solution captures the boundary layer behavior of the deformation. Also, analytical formulas for the radial and hoop stretches and stresses are obtained at the two boundary surfaces of the shell, making the influence of the parameters explicit. An interesting finding is that the deformation is characterized by a single material parameter (called the hydrogel deformation constant), although the free-energy function for the hydrogel contains two material parameters. Comparisons with numerical solutions are also made and good agreements are found.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the deformation analysis of hydrogel shells in equilibrium states under different conditions. Specifically, the author focuses on the analytical solutions of hydrogel with a core - shell structure in cases of free swelling, approximately free swelling, and general non - uniform swelling. Since the hydrogel undergoes large and non - uniform deformation during the water absorption process, this nonlinearity leads to mathematical difficulties, making it very complicated to obtain analytical solutions. Therefore, the main objective of the paper is to solve the analytical solutions in these deformation cases by perturbation methods and the extended method of matched asymptotics.
### Main research problems:
1. **Free swelling deformation**: When the hydrogel has no external mechanical constraints, its deformation is uniform and isotropic. The author obtained the analytical solution in the free swelling state by perturbation methods and introduced a single parameter \(\alpha\) called "hydrogel deformation constant", which mainly determines the characteristics of the deformation.
2. **Approximately free swelling deformation**: When there is a fixed radial displacement on the inner surface of the hydrogel while the outer surface is still stress - free, the deformation is non - uniform but close to the free swelling state. The author obtained the analytical solution of the deformation in this case by perturbation methods and analyzed the stress and elongation ratio of the inner and outer surfaces.
3. **General non - uniform swelling deformation**: When the elongation ratio of the inner surface is far from the free swelling state, the deformation is non - uniform and complex. The author introduced an extended method of matched asymptotics to deal with the nonlinear second - order differential equation with variable coefficients in this case, thus obtaining the analytical solution. This method involves introducing a transition region to connect the solutions of the inner and outer layers.
### Mathematical models and methods:
- **Free energy function**: The author adopted the free energy function proposed by Flory and Rehner, which describes the mixing and stretching processes of the hydrogel.
- **Nonlinear differential equation**: The deformation of the hydrogel is described by a nonlinear second - order differential equation with variable coefficients, which is solved by perturbation methods and the method of matched asymptotics.
- **Boundary conditions**: Different boundary conditions, such as fixed elongation ratio or stress - free conditions, are applied on the inner and outer surfaces.
### Main findings:
- **Single - parameter control**: Although the free energy function contains two material parameters \(\chi\) and \(vN\), the deformation is mainly controlled by a single parameter \(\alpha\).
- **Accuracy of analytical solutions**: By comparing with numerical solutions, the author verified the accuracy of the analytical solutions, especially when \(\alpha\) is large.
- **Boundary layer behavior**: For general non - uniform swelling deformation, the analytical solution captures the boundary layer behavior of the deformation, especially the rapid change near the inner surface.
In conclusion, through mathematical modeling and analytical methods, this paper systematically solves the deformation problems of hydrogel shells under different conditions, providing a theoretical basis for understanding the behavior of hydrogel.