Key challenges, recent advances and future perspectives of rechargeable lithium-sulfur batteries
Ze-Chen Lv,Peng-Fei Wang,Jian-Cang Wang,Shu-Hui Tian,Ting-Feng Yi
DOI: https://doi.org/10.1016/j.jiec.2023.04.025
IF: 6.76
2023-05-29
Journal of Industrial and Engineering Chemistry
Abstract:Lithium-sulfur (Li-S) battery, which releases energy by coupling high abundant sulfur with lithium metal, is considered as a potential substitute for the current lithium-ion battery. Thanks to the lightweight and multi-electron reaction of sulfur cathode, the Li-S battery can achieve a high theoretical specific capacity of 1675 mAh g −1 and specific energy of 2600 Wh kg −1 . However, some key scientific issues limit its practical application, such as the "shuttle effect" of lithium polysulfides, large volume change, poor conductivity of sulfur and its solid-state products, and self-discharge phenomenon. Of these, the "shuttle effect" is recognized as the most critical challenge affecting on electrochemical performance. Hence, this review first systematically introduces the development of Li-S batteries and the corresponding "shuttle effect". Then, the latest work on anode, cathode, separator and electrolyte are summarized. Finally, some promising views on the future research direction of this battery system are put forward. Graphical abstract Download : Download high-res image (242KB) Download : Download full-size image In this study, three types of electrodes based on polyvinyl alcohol (PVA)/ polyaniline (PANI) are synthesized and their effects on the electro-oxidation of methanol (MeOH) are investigated. Composite electrodes of PVA/PANI-Ni, PVA/PANI-Cu, and PVA/PANI-NiCu are synthesized via the in-situ polymerization of aniline, Cu, Ni, and NiCu (Ni 80 Cu 20 alloy) particles in the presence of PVA. Optical and chemical compositions and morphological characteristics of composite films are determined using UV–Vis, FTIR, SEM, and TGA analysis. The electrode degradation efficiency of MeOH following oxidation and the elimination of toxins from the solution by voltammetry and chronopotentiometry is also investigated. The results indicate that PVA/PANI-NiCu performs better than PVA/PANI-Ni electrode. The degradation of MeOH in an alkaline medium is monitored using UV–visible spectroscopy under a current density of 2.18 mAcm −2 with a stock solution of 0.1 M MeOH for 120 min. The toxicities of MeOH and the generated by-products were tested and confirmed through a growth-inhibition test against Staphylococcus aureus ATCC 6538 using the disk-diffusion method; the obtained results confirmed the effectiveness of our process. Self-healing polymeric coating is a class of self-healing materials applied on the surface of a metal to provide a dense barrier, to protect the metal from the corrosive environment. Currently, Self-healing polymer materials are an emerging area of research due to their high attributes, including intrinsic and extrinsic mechanisms with autonomous/non-autonomous healing approaches, longer lifespan, eco-friendly, high durability, and sustainability. The polymer coating matrix provides the efficient release of incorporated self-healing agents after triggering due to the crack formation in the polymer matrix, which aids the self-healing performance of the polymeric matrices. A variety of studies have been reported in the literature on self-healing coating matrices; however, none of them have been reported as such. This comprehensive review covers; (1) the generations of self-healing, (2) types of mechanisms, (3) classification based on self-healing polymer matrices, (4) typical fabrication techniques, (5) potential applications, and some critical thoughts on the choice and design of the self-healing system. Transition metal oxides are deemed as a promising substitute for graphite anode materials of Li-ion batteries (LIBs) on account of their large specific capacity. Nonetheless, the large volume change in the process of charging and discharging leads to low capacity retention. Herein, a well-designed ZnCo 2 O 4 @coal tar pitch based porous carbon (ZCO-CTP) microsphere is prepared to construct the high-performance anode of LIBs. The coating modification of CTP significantly reduces the polarization and charge transfer resistance and improves the migration ability of ions and electrons, thus achieving a superior reversible capacity and cycling stability of ZCO-CTP anode. The battery with obtained ZCO-CTP5 provides a large charge capacity of 406.17 mAh/g at 1000 mA g −1 compared with pristine ZCO (only 157.78 mAh/g). Even after 1000 cycles at 1000 mA g −1 , the battery can achieve a charge/discharge capacity of 598.46/601.17 mAh/g. We believe that the application of CTP will provide a new perspective for the exploitation of hi -Abstract Truncated-
engineering, chemical,chemistry, multidisciplinary