Abstract:Purpose In recent years, owing to the rapidly increasing labor costs, the demand for robots in daily services and industrial operations has been increased significantly. For further applications and human–robot interaction in an unstructured open environment, fast and accurate tracking and strong disturbance rejection ability are required. However, utilizing a conventional controller can make it difficult for the robot to meet these demands, and when a robot is required to perform at a high-speed and large range of motion, conventional controllers may not perform effectively or even lead to the instability. Design/methodology/approach The main idea is to develop the control law by combining the SMC feedback with the ADRC control architecture to improve the robustness and control quality of a conventional SMC controller. The problem is formulated and solved in the framework of ADRC. For better estimation and control performance, a generalized proportional integral observer (GPIO) technique is employed to estimate and compensate for unmodeled dynamics and other unknown time-varying disturbances. And benefiting from the usage of GPIO, a new SMC law can be designed by synthesizing the estimation and its history. Findings The employed methodology introduced a significant improvement in handling the uncertainties of the system parameters without compromising the nominal system control quality and intuitiveness of the conventional ADRC design. First, the proposed method combines the advantages of the ADRC and SMC method, which achieved the best tracking performance among these controllers. Second, the proposed controller is sufficiently robust to various disturbances and results in smaller tracking errors. Third, the proposed control method is insensitive to control parameters which indicates a good application potential. Originality/value High-performance robot tracking control is the basis for further robot applications in open environments and human–robot interfaces, which require high tracking accuracy and strong disturbance rejection. However, both the varied dynamics of the system and rapidly changing nonlinear coupling characteristic significantly increase the control difficulty. The proposed method gives a new replacement of PID controller in robot systems, which does not require an accurate dynamic system model, is insensitive to control parameters and can perform promisingly for response rapidity and steady-state accuracy, as well as in the presence of strong unknown disturbances.

Disturbance observer‐based control for cable‐driven parallel robots with external disturbance using deep reinforcement learning

Robust Optimal Control for Cable-Driven Parallel Robots via Event-Triggered ADP

DOB-Net: Actively Rejecting Unknown Excessive Time-Varying Disturbances

Adaptive composite neural network disturbance observer-based dynamic surface control for electrically driven robotic manipulators

Dynamic Obstacle Avoidance for Cable-Driven Parallel Robots With Mobile Bases via Sim-to-Real Reinforcement Learning

Vibration Suppression for Large-Scale Flexible Structures Using Deep Reinforcement Learning Based on Cable-Driven Parallel Robots

Disturbance Rejection Sliding Mode Control for Robots and Learning Design

Disturbance Observer-based Control Barrier Functions with Residual Model Learning for Safe Reinforcement Learning

Disturbance Observer-based Neural Network Integral Sliding Mode Control for a Constrained Flexible Joint Robotic Manipulator

Active disturbance rejection sliding mode control for robot manipulation

Utilizing Reinforcement Learning to Drive Redundant Constrained Cable-Driven Robots with Unknown Parameters

Tri-Space Operational Control of Redundant Multilink and Hybrid Cable-Driven Parallel Robots Using an Iterative-Learning-Based Reactive Approach

Disturbance Rejection Control for Autonomous Trolley Collection Robots with Prescribed Performance

Adaptive recursive sliding mode based trajectory tracking control for cable-driven continuum robots

Advanced control algorithm considering cable interference of mobile cable-driven parallel robots (MCDPRs)

Composite hierarchical anti-disturbance control for nonlinear robotic systems with robust nonlinear disturbance observer

Disturbance compensation based robust backstepping control for 2-DOF electro-hydraulic tunneling robot

Applying Deep Reinforcement Learning to Cable Driven Parallel Robots for Balancing Unstable Loads: A Ball Case Study

Non-linear Task-Space Disturbance Observer for Position Regulation of Redundant Robot Arms against Perturbations in 3D Environments

Flatness-based nonlinear internal model control with disturbances compensation via improved extended state observer for remotely operated vehicle

Research on Active Disturbance Rejection Algorithm for Loading Control of 3-DOF Parallel Robot