Abstract:Compared with the traditional passive- and active-damping techniques for mitigating the impedance mismatch between the input impedance of constant power loads (CPLs) and the output impedance of the dc link within dc microgrids, there is a growing interest in leveraging model predictive control (MPC). MPC is proven to have the advantage of addressing the impedance mismatch issue, which leads to system instability and oscillations, owing to its constant handling, multivariable control, predictive capabilities, and optimization-based control. Nevertheless, the generalized MPC faces some technical challenges as it involves intricate enumeration and operations in switching state selection and observer design, thereby increasing computational complexity. Moreover, issues such as variable switching frequency and a lack of protection mechanisms impede its widespread application. To overcome these challenges, this article proposes an MPC technique employing a nonlinear inductor (NI) in the dc cascaded system to enable its faster and more stable transitions. The proposed controller utilizes the dead-beat principle to simplify the predictive process and alleviate the digital implementation burden in the control stage. The incorporation of the NI extends the stability range of the control-to-output transfer characteristics of the power conversion stage with CPL. Subsequently, two Luenberger observers are introduced, capable of handling load uncertainty and adapting to changes in system parameters. The selection criteria and stability analysis of the observer parameters are discussed. The proposed MPC is simple to implement and operates at a fixed switching frequency. Validation through simulation and experimental results confirms the effectiveness of the technique in improving system stability.

A novel continuous control set model predictive control to guarantee stability and robustness for buck power converter in DC microgrids

Adaptive Passivity-Based Control of Dc–dc Buck Power Converter with Constant Power Load in DC Microgrid Systems

Sliding Mode Control of Parallel-Connected DC-DC Buck Power Converters in DC Microgrid Systems

Passivity-Based Control of DC-DC Boost Power Converter for MPPT Used in DC Microgrid Systems

Data-Enabled Finite Control-Set Model Predictive Control of a Grid-Tied Inverter

Stabilization Of Dc-Dc Buck Power Converter Feeding A Mixed Load Using Passivity-Based Control With Nonlinear Disturbance Observer

Efficient Model-Free Predictive Power Control for Active Front-End Modular Multilevel Converter

Data-Driven Finite Control-Set Model Predictive Control for Modular Multilevel Converter

Dynamic Stabilization of DC Microgrids Using ANN-Based Model Predictive Control

A Comprehensive Control Method with Model Predictive Function of MMC-HVDC System under Unbalanced Grid Faults

Enhancing Stability of DC Cascaded Systems with CPLs using MPC Combined with NI And Accounting for Parameter Uncertainties

Data-Driven Neural Predictors-Based Robust MPC for Power Converters

A Decentralized Fault-Tolerant Control for DC Microgrids Against Disturbances and Actuator Faults

Robust Passivity-Based Control for Interleaved Bidirectional dc-dc Power Converter With Constant Power Loads in DC Shipboard Microgrid

Model Predictive Control-Based Coordinated Control Algorithm with a Hybrid Energy Storage System to Smooth Wind Power Fluctuations

Robust adaptive composite control of DC–DC boost converter with constant power load in DC microgrid

Model Predictive Control for Dual-Active-Bridge Converters Supplying Pulsed Power Loads in Naval DC Micro-Grids

Adaptive Voltage-Guaranteed Control of DC/DC-Buck-Converter-Interfaced DC Microgrids With Constant Power Loads

A Novel Assorted Nonlinear Stabilizer for DC–DC Multilevel Boost Converter With Constant Power Load in DC Microgrid

H∞ based control of a DC/DC buck converter feeding a constant power load in uncertain DC microgrid system

Adaptive Passivity-Based Control of a DC–DC Boost Power Converter Supplying Constant Power and Constant Voltage Loads