Abstract:The fabrication of compact, continuous, and large-scale metal organic framework (MOF) membranes with high permeability and H-2/CO2 selectivity remains challenging because of the wake interaction between the MOF membrane and the substrate. In addition, substrates with smooth and plain surfaces and suitable pore size are required to prepare high-quality MOF membranes because it is difficult to obtain dense and continuous MOF membranes on a substrate with large pores and rough surfaces. To overcome these challenges, numerous MOF membrane growth methods have emerged, including in situ (direct) growth, secondary (seeded) growth, and layer-by-layer growth methods as well as electrostatic spinning and the chemical modification of the substrate. Among these methods, usage of substrates suitable for surface-functionalization is a promising technique. Herein, Al2O3 was selected as the substrate and was coated with PIM-1 (one polymer of intrinsic microporosity), followed by carboxylation of PIM-1 to furnish a large number of carboxyl groups on the surface. In situ growth of the MOF membrane using the interactions between the carboxyl group and the metal yielded two types of compact, continuous, and large-scale polymer-supported MOF membranes (PIM-1-COOH/ZIF-8 and PIM-1-COOH/HKUST-1). Furthermore, the fabricated polymer-supported MOF membrane structures were investigated by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). Gas separation experiments were performed to explore the gas permeability and selectivity of the prepared MOF membranes. The XRD characterization confirmed the pure phase and high crystallinity of the MOF membranes. The SEM images showed that the MOF membranes were compact and continuous with a tight combination between the MOF crystal membrane and the substrate. Gas separation measurements showed that both MOF membranes exhibited high H-2 permeability and selectivity for H-2/CO2. For the PIM-1-COOH/ZIF-8 and PIM-1-COOH/HKUST-1 membranes, the 1 : 1 binary mixtures gas separation factors of H-2/CO2 calculated as the gas molar ratios in the permeate and retentate side 7.32 and 9.69, respectively, at room temperature and atmospheric pressure. The H-2/CO2 mixture separation factors of the two MOF membranes exceeded the corresponding Knudsen constants (4.7), with H-2 permeances higher than 3.16 x 10(-6) and 1.14 x 10(-6) mol.m(-2).s(-1).Pa-1, respectively. The ideal separation factors of H-2/CO2 of both MOF membranes calculated as the ratio of single gas permeances were 7.70 and 12.04, respectively, with the respective H-2 permeances of up to 3.73 x 10(-6) and 3.86 x 10(-6) mol.m(-2).s(-1).Pa-1. Because of their outstanding characteristics, these novel MOF membranes can be widely used in the fields of H-2 purification and separation.

Rapid synthesis of ultra-microporous metal-organic framework tubular Ni-LAP membranes for H 2 separation by linker salt method

Rapid Synthesis of Ultra-Microporous Metal-Organic Framework Tubular Ni-LAP Membranes for H2 Separation by Linker Salt Method

Facile Synthesis of Ultra-microporous Pillar-Layered Metal-Organic Framework Membranes for Highly H2-Selective Separation.

Fabrication and orientation of Ni-LAB membranes by linker salt approach

Asymmetric Pore Windows in Pillar-Layered Metal-Organic Framework Membranes for H2/CO2 Separation.

Facile Synthesis of Ultra-microporous Pillar-Layered Metal-Organic Framework Membranes for Highly H 2 -Selective Separation

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Asymmetric Pore Windows in Pillar-Layered Metal-Organic Framework Membranes for H 2 /CO 2 Separation

Self-assembly of defect-free polymer-based zeolite imidazolate framework composite membranes with metal-phenolic networks for high efficient H<sub>2</sub>/CH<sub>4</sub> separation

Ni-metal-organic-framework (Ni-MOF) membranes from multiply stacked nanosheets (MSNs) for efficient molecular sieve separation in aqueous and organic solvent

Metal-Organic Framework/PVDF Composite Membranes with High H2 Permselectivity Synthesized by Ammoniation.

Lamellar crosslinking reinforced strategy to prepare 2D metal-organic framework membranes for ultra-fast and robust molecules/ions separation

GO-guided direct growth of highly oriented metal-organic framework nanosheet membranes for H 2 /CO 2 separation.

Transformation of Metal-Organic Frameworks for Molecular Sieving Membranes

Metal based gels as versatile precursors to synthesize stiff and integrated MOF/polymer composite membranes

t growth of highly oriented metal – organic framework nanosheet membranes for H 2 / CO 2 separation †

Fabrication of Polymer-Supported Metal Organic Framework Membrane and Its Gas Separation Performance

In situ electrochemical potential-induced synthesis of metal organic framework membrane on polymer support for H2/CO2 separation

In-situ Synthesis of [ni(tzba)0.5(f)(bpy)] Membrane with High H2 Permeability Through Ultramicropores and Selective CO2 Adsorption with Strong Affinity of Uncoordinated N-Ni-F− Active Sites

Metal-organic framework nanosheets as building blocks for molecular sieving membranes

Bottom-up Fabrication of Two-Dimensional Co-based Zeolitic Imidazolate Framework Tubular Membranes Consisting of Nanosheets by Vapor Phase Transformation of Co-based Gel for H2/CO2 Separation