Abstract:The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and polyhydroxybutyrate (PHB) biopolymer composites reinforced with thermally treated wood flour and to determine the formulations having optimum properties by using multi-criteria decision-making (MCDM) methods. As a filler, Scots pine wood flour (untreated and thermally treated at 212 °C) was used at the loading rates of 10% and 30%. The samples were prepared using a twin-screw extruder and then by compression molding. The results showed that the addition of both thermally treated and untreated wood flour slightly increased the density of the composites. According to the color measurement, the thermally treated wood composites were slightly darkened in appearance. In the composites, with both wood fillers, the water absorption and thickness swelling ratios had increased during the 20–250 days of water exposure. Lower water absorption and thickness swelling rates were found for the composites with thermally treated wood filler compared to the other composites. The wood fillers generally lowered the mechanical properties of the PLA and PLA/PHB composites, with the PHB composites as the exception. However, the tensile modulus and Izod impact strength of the composites generally increased with the addition of wood fillers. Morphological examination performed by scanning electron microscopy (SEM) indicated that the wood flour was mostly homogeneously distributed in the matrix, which improved the mechanical properties of the composites. Thermogravimetric analysis (TGA) showed that the addition of wood filler to the neat biopolymers as a rule did not provide significant improvement in the thermal stability; however, the fillers increased the thermal stability of neat PHB. The Fourier-transform infrared (FTIR) spectroscopy detected no differences in the chemical structure of the composites. The X-ray diffraction (XRD) results indicated a general increase in the crystallinity with the addition of wood fillers to the neat biopolymers and the blends. All the findings were subjected to MCDM analysis to determine the formulation having the optimum properties and the results showed this to be the neat PLA sample.

A preliminary evaluation of bing cherry tree (prunus avium L.) pruning waste as an alternative lignocellulosic filler for lightweight composite material applications

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

An initial investigation to explore the feasibility of fruit waste fillers for developing sustainable thermoplastic composites

Appraisal of inorganic and lignocellulosic organic shell wastes as a green filler in epoxy-based hybrid composites

Synthesis and characterization of Borassus flabellifer flower waste-generated cellulose fillers reinforced PMC composites for lightweight applications

Isolation and characterization of Banyan Tree Root Filler for Polymer Composites in Light-Weight Applications

Optimizing dielectric constant of noncommercial biobased fibres - Acacia Nilotica, Acacia Leucophloea and Prosopis juliflora - For composite applications with selected fillers

Exploring strategies for valorizing wood processing waste: advancing sustainable, fully lignocellulosic biocomposites

Valorization of Winery By-Products as Bio-Fillers for Biopolymer-Based Composites

Hybrid polymer composites of Terminalia chebula filler reinforced thermal and mechanical characterization of bagasse/tamarind seed

Utilizing almond shell filler to improve strength and sustainability of jute fiber composites

Preparation and characterization of micro/nanocellulose reinforced PVDF/wood composites

Morphology and Physico-Mechanical Threshold of α-Cellulose as Filler in an E-SBR Composite

Carbonized Lignin as Sustainable Filler in Biobased Poly(trimethylene terephthalate) Polymer for Injection Molding Applications

Effect of sawdust fillers loaded on Cucumis sativus fiber‐reinforced polymer composite: a novel composite for lightweight static application

Synthesis and suitability characterization of microcrystalline cellulose from Citrus x sinensis sweet orange peel fruit waste-based biomass for polymer composite applications

Current utilization of waste biomass as filler for wood adhesives: A review

Lignocellulose sustainable composites from agro-waste Asparagus bean stem fiber for polymer casting applications: Effect of fiber treatment

Novel sesame oil cake biomass waste derived cellulose micro-fillers reinforced with basalt/banana fibre-based hybrid polymeric composite for lightweight applications

Sustainable Engineering Polymer Composites Fabricated Using Delignified Bamboo Fiber as Reinforcement and Walnut Shell Powder as Filler

Coniferous Bark as Filler for Polylactic Acid-Based Biocomposites