Abstract:Reinforcing steel bars play a crucial role in reinforced concrete constructions. To comprehend the behavior of reinforced concrete structures under extreme conditions like impact and blast, it is imperative to investigate the influence of strain rate on reinforcing steel bars. This study aims to investigate the performance of 550D reinforcing steel bars with diameters of 8 and 10 mm under high-strain-rate loading conditions. The experiments were conducted using a Split Hopkinson Pressure Bar setup to analyze the tensile and compressive behavior of the reinforcing steel bars at high strain rates. Precise calibration of both compressive and tensile Split Hopkinson Pressure Bars was carried out to ensure the dynamic equilibrium of the propagating waves within the specimen. Specimens featuring a 3 mm gauge diameter were utilized for dynamic tension, whereas specimens with l/d ratios of 0.5 and 1.0 were employed for dynamic compression at various strain rates. Stress–strain curves for the reinforcing steel bars were plotted at different strain rates, and the strain rate sensitivity was analyzed. High-speed photography was used to examine the deformation of samples under compression at high strain rates. It was observed that the percentage of elongation was higher for l/d 0.5 compared to l/d 1.0 at nearly the same strain rate. The research further assessed the Cowper–Symonds and Johnson–Cook constitutive models for tension and compression at high strain rates, providing an accurate prediction of the true stress–strain relationship. The derived strain rate parameters indicated that both 8- and 10-mm reinforcing steel bars exhibited similar behavior under dynamic tension. However, the 10-mm reinforcing steel under dynamic compression demonstrated higher values than the 8-mm reinforcing steel. These findings offer potential applications in exploring the dynamic characteristics of similar reinforcing steels and their corresponding structural components in future investigations.

Material Characterization of 550D Reinforcing Steel Bar at High Strain Rates

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Strain Rate Behavior in Tension of Reinforcing Steels HPB235, HRB335, HRB400, and HRB500

Strength of Concrete Filled Steel Tubes under High-Strain Rate Loading

Research on Dynamic Mechanical Behavior of Reinforcing Steel Under Ultrahigh Strain Rate

Tensile performance of normal and high-strength structural steels at high strain rates

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

Direct tensile behavior of steel fiber reinforced ultra-high performance concrete at high strain rates using modified split Hopkinson tension bar

Tensile Mechanical Behaviour of Ultra-High Strength Cold Rolled Dual Phase Steel DP1000 at High Strain Rates

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Rate-Dependent Behavior And Constitutive Model Of Dp600 Steel At Strain Rate From 10(-4) To 10(3) S(-1)

A Study of Strain-Rate Effect and Fiber Reinforcement Effect on Dynamic Behavior of Steel Fiber-Reinforced Concrete

A Study on High Strain Rate Tensile Experimental Technique Aimed at Fiber Reinforced Composite

Material characterization at high strain rate by Hopkinson bar tests and finite element optimization

STRAIN RATE EFFECT ON DYNAMIC BEHAVIORS OF CONCRETE MEMBERS

Experimental characterization of concrete in dynamic tension

Experimental Technique of High Strain-Rate Tension Based on Hopkinson Bar

Dynamic Mechanical Behavior and Constitutive Models of S890 High-Strength Steel at Intermediate and High Strain Rates

High Strain Rate Behaviour of Stainless-Clad Bimetallic Steel

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite