Abstract:The discharge of oily effluents from industrial production and crude oil spills at sea result in significant water pollution, posing a major danger to the environment and human health. Due to the tiny droplet size, emulsion separation is a difficult task in the separation and purification of oily wastewater. Polydopamine (PDA) and TiO 2 nanoparticles were coated on the surface of polyvinylidene fluoride (PVDF) electrospun nanofibrous to increase surface roughness, and then the low surface energy substance octadecylamine (ODA) was grafted. As a result, a superhydrophobic /TiO 2 @ODA nanofibrous felts with a water contact angle of 168.1° has been developed. Because of their three-dimensional porous structure, the nanofibrous felts have a porosity of up to 72.9 %. The tensile strength of a series of reinforced /TiO 2 @ODA nanofibrous felts reaches 30.06 MPa, which is useful for maintaining the stability of the nanofibrous felts during the pressure separation. The oil and water in the emulsion are entirely separated due to the selective permeability induced by the strong superhydrophobic and superlipophilic properties. The separation efficiency of over 99 % and flow flux of above 1100 L·m −2 ·h −1 are achieved. The performance of the nanofibrous felts in inhibiting bacterial growth was then investigated, and it is found that a significant inhibition circle appeared in the flat dish diffusion method, with a bacteriostasis rate exceeding 99 %. This result demonstrates that /TiO 2 @ODA nanofibrous felts have excellent antimicrobial properties. Finally, UV–vis absorption spectroscopy was employed to demonstrate the good catalytic degradation of organic dyes by /TiO 2 @ODA nanofibrous felts. /TiO 2 @ODA nanofibrous felts have a variety of applications in the deep separation and purification of oily wastewater due to these characteristics.

C,N co-doped TiO2 hollow nanofibers coated stainless steel meshes for oil/water separation and visible light-driven degradation of pollutants

Composite polydopamine-based TiO2 coated mesh with restorable superhydrophobic surfaces for wastewater treatment

Multifunctional CuO‐Coated Mesh for Wastewater Treatment: Effective Oil/Water Separation, Organic Contaminants Photodegradation, and Bacterial Photodynamic Inactivation

Ni-Al Layered Double Hydroxides (ldhs) Coated Superhydrophobic Mesh with Flower-Like Hierarchical Structure for Oil/water Separation

In Situ Dual-Functional Water Purification with Simultaneous Oil Removal and Visible Light Catalysis

Mussel-inspired fabrication of superhydrophobic cotton fabric for oil/water separation and visible light photocatalytic

Integrated oil separation and water purification by a double-layer TiO2-based mesh

Superwetting Copper Meshes Based on Self-Organized Robust CuO Nanorods: Efficient Water Purification for in Situ Oil Removal and Visible Light Photodegradation

Integrated oil separation and water purification by a double-layer TiO 2-based mesh

PVDF-based nanofiber membrane decorated with Z-scheme TiO 2 /MIL-100(Fe) heterojunction for efficient oil/water emulsion separation and dye photocatalytic degradation

Effective oil-water mixture separation and photocatalytic dye decontamination through nickel-dimethylglyoxime microtubes coated superhydrophobic and superoleophilic films

Bifunctional TiO2-Coated SSM for Efficient Emulsion Separation and Photocatalytic Degradation of Soluble Organic Pollutants

A durable Ni3S2 coated mesh with reversible transition between superhydrophobicity and underwater superoleophobicity for efficient oil-water separation

Dual-functional underliquid superhydrophobic and superoleophobic stainless steel mesh decorated with Ni3S2 nanorods for continuous oil/water separation

Multifunctional Zinc Oxide-coated Mesh for Oil/Water Separation and Pollutant Degradation

A simple surface modification method to prepare versatile PVDF electrospun nanofibrous felts for separation, sterilization and degradation

Superwetting Ag@Cu 2 O anchored copper mesh for efficient oil/water separation and visible-light driven removal of organic pollutants

Superhydrophilic, underwater superoleophobic and self-cleaning nickel composite mesh via simultaneous acid etching and in-situ growth of Prussian blue analogue for oil-water separation

Advanced photocatalytic self-cleaning membrane for highly efficient oil-water separation using C/TiO2/SiO2 composite

Brushing a superhydrophilic cross-linked coating on the metal mesh for dye separation

Biomimetic superwetting CuS x –based composite mesh for wastewater treatment: Reversible oil/water separation, photocatalytic degradation and photothermal sterilization