Abstract:3D printing utilized as a direct deposition of conductive polymeric materials onto textiles reveals to be an attractive technique in the development of functional textiles. However, the conductive fillers—filled thermoplastic polymers commonly used in the development of functional textiles through 3D printing technology and most specifically through Fused Deposition Modeling (FDM) process—are not appropriate for textile applications as they are excessively brittle and fragile at room temperature. Indeed, a large amount of fillers is incorporated into the polymers to attain the percolation threshold increasing their viscosity and stiffness. For this reason, this study focuses on enhancing the flexibility, stress and strain at rupture and electrical conductivity of 3D-printed conductive polymer onto textiles by developing various immiscible polymer blends. A phase is composed of a conductive polymer composite (CPC) made of a carbon nanotubes (CNT) and highly structured carbon black (KB)- filled low-density polyethylene (LDPE) and another one of propylene-based elastomer (PBE) blends. Two requirements are essential to create flexible and highly conductive monofilaments for 3D-printed polymers onto textile materials applications. First, the co-continuity of both the thermoplastic and the elastomer phases and the location of the conductive fillers in the thermoplastic phase or at the interface of the two immiscible polymers are necessary to preserve the flexibility of the elastomer while decreasing the global amount of charges in the blends. In the present work based on theoretical models, when using a two-step melt process, the KB and CNT particles are found to be both preferentially located at the LDPE/PBE interface. Moreover, in the case of the two-step extrusion, SEM characterization showed that the KB particles were located in the LDPE while the CNT were mainly at the LDPE/PBE interface and TEM analysis demonstrated that KB and CNT nanoparticles were in LDPE and at the interface. For one-step extrusion, it was found that both KB and CNT are in the PBE and LDPE phases. These selective locations play a key role in extending the co-continuity of the LDPE and PBE phases over a much larger composition range. Therefore, the melt flow index and the electrical conductivity of monofilament, the deformation under compression, the strain and stress and the electrical conductivity of the 3D-printed conducting polymer composite onto textiles were significantly improved with KB and CNT-filled LDPE/PBE blends compared to KB and CNT-filled LDPE separately. The two-step extrusion processed 60%(LDPE16.7% KB + 4.2% CNT)/40 PBE blends presented the best properties and almost similar to the ones of the textile materials and henceforth, could be a better material for functional textile development through 3D printing onto textiles.

Application of 3D printing cellulose fabrics based on cotton fibers in the textile and fashion industry

3D printing with cellulose materials

Cotton-containing printing wires based on the two-dimensional braiding method for three-dimensional printing of clothing

3D printing of all-regenerated cellulose material with truly 3D configuration: The critical role of cellulose microfiber

Development of Flexible and Conductive Immiscible Thermoplastic/Elastomer Monofilament for Smart Textiles Applications Using 3D Printing

Performance of Fabrics with 3D-Printed Photosensitive Acrylic Resin on the Surface

3D Printing of Textiles: Potential Roadmap to Printing with Fibers

Cellulose‐Nanofiber‐Enabled 3D Printing of a Carbon‐Nanotube Microfiber Network

Textile-based 3D printing and traditional Chinese geometric patterns for fashion textile development

Regenerated cellulose in additive manufacturing

Materials and Methods for All-Cellulose 3D Printing in Sustainable Additive Manufacturing

FabricFit: Transforming Form-Fitting Fabrics

Tailoring 3D printed cellulose acetate properties produced via direct ink writing: Densification through over‐extrusion and evaporation rate control

Three-Dimensional Conformal Porous Microstructural Engineering of Textile Substrates with Customized Functions of Brick Materials and Inherent Advantages of Textiles

MXene‐Reinforced Cellulose Nanofibril Inks for 3D‐Printed Smart Fibres and Textiles

Progress, Challenge and Perspective of Fabricating Cellulose

Cellulose hydrogel skeleton by extrusion 3D printing of solution

Development and application of fused deposition molding 3D printing technology in textile and fashion design

Moisture-Responsive Cellulose For 4D Printing

Testing thermoplastic elastomers selected as flexible three-dimensional printing materials for functional garment and technical textile applications