Abstract:A significant way to achieve energy saving and emission reduction is to optimize the design of heat transfer devices. As is widely applied in industry, a corrugated tube constructed by B-spline curve is numerically investigated and the profile is optimized, using a surrogate model with considerations of performance evaluation criterion ( PEC ) as single objective or minimum flow resistance ( f ) and maximum Nusselt number ( Nu ) as multi-objective. The machine learning technique is used to determine the candidate samples to update the surrogate model for improving the optimization efficiency and reliability, which is validated to be effective in this paper The optimization results show that the comprehensive performance of the corrugated tube is more sensitive to the vertical coordinates of the control points, with the appropriate increase in the number of control points for B-spline, and the better performance of corrugated tubes is achieved The optimal profile corresponding to the best comprehensive performance is a double-crest shape. With Reynolds number ( Re ) increased, the wave-amplitude of the first wave gradually gets smaller, and the profile of the corrugated tube becomes smoother. With the increasing consideration of heat transfer performance over multi-objective optimization, the optimal shape gradually changes from a double-trough to a single-trough shape. Finally, the maximum PEC of 1.2415, 1.1845, and 1.1504 are acquired with the Re = 8000, 10000, and 12000, respectively, and the maximum Nu increases from 358.540 to 478.821. Compared with the design with the maximum thermal performance, the best compromise solution from multi-objective optimization is determined at Re = 8000, 10000, and 12000, showing improved flow resistance of 83.917%, 85.465%, and 84.473%, but with sacrificed thermal performance of 36.754%, 37.088%, and 35.005%, respectively.

Machine learning-supported CFD optimization of heat transfer in a pipe with a corrugated wall shape

Machine Learning Strategy for Wall Heat Flux Prediction in Aerodynamic Heating

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Shape optimization of corrugated tube using B-spline curve for convective heat transfer enhancement based on machine learning

Machine learning and computational fluid dynamics based optimization of finned heat pipe radiator performance

Machine learning for rapid discovery of laminar flow channel wall modifications that enhance heat transfer

Application of machine learning methods for investigating the heat transfer enhancement performance in a circular tube with artificial roughness

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

The numerical simulation research for the heat transfer and flow of the large-scale helically corrugated pipe

Thermohydraulic analysis of hybrid smooth and spirally corrugated tubes

Machine Learning Assisted Microchannel Geometric Optimization—A Case Study of Channel Designs

Multi-Objective Optimization of Geometrical Parameters of Corrugated-Undulated Heat Transfer Surfaces Using CFD, Artificial Neural Networks and Genetic Algorithms

Enhancement of thermal and flow characteristics in helically coiled tubes with corrugated surfaces by Genetic Algorithm based optimization

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

Investigation and optimization of heat transfer performance of a spirally corrugated tube using the Taguchi method

Heat Convection Enhancement of Unilateral-Heated Square Channels by Inclined Ribs Optimization with Machine Learning

Transient CFD Modelling of Air–Water Two-Phase Annular Flow Characteristics in a Small Horizontal Circular Pipe

Multi-objective optimization of geometrical parameters of corrugated-undulated heat transfer surfaces

Numerical study on fully-developed turbulent flow and heat transfer in inward corrugated tubes with double-objective optimization

Numerical Simulation of Turbulent Structure and Particle Deposition in a Three-Dimensional Heat Transfer Pipe with Corrugation

Machine Learning-Based Predictions of Flow and Heat Transfer Characteristics in a Lid-Driven Cavity with a Rotating Cylinder