Abstract:Indoor air pollution remains a major concern, with formaldehyde (HCHO) a primary contributor due to its long emission period and associated health risks, including skin allergies, coughing, and bronchitis. This study evaluated the adsorption performance and economic efficiency of various adsorbents (biochar, activated carbon, zeolites A, X, and Y) selected for HCHO removal. The impact of thermal treatment on adsorbent regeneration was also assessed. The experimental apparatus featured an adsorption column and HCHO concentration meter with an electrochemical sensor designed for adsorption analysis. Zeolite X exhibited the highest adsorption performance, followed by zeolite A, zeolite Y, activated carbon, and biochar. All adsorbents displayed increased HCHO removal rates with an extended length/diameter (L/D) ratio of the adsorption column. Zeolite A demonstrated the highest economic efficiency, followed by zeolite X, activated carbon, zeolite Y, and biochar. Higher L/D ratios improved economic efficiency and prolonged the replacement cycle (the optimal timing for adsorbent replacement to maintain high adsorption performance). Sensitivity analysis of adsorbent regeneration under varying thermal treatment conditions (150, 120, and 80°C) and durations (60, 45, and 30 min) revealed minimal changes in adsorption efficiency (±3%). The results indicated the potential of adsorbent regeneration under energy-efficient thermal treatment conditions (80°C, 30 min). In conclusion, this study underscores the importance of a comprehensive assessment, considering factors such as adsorption performance, replacement cycle, economic efficiency, and regeneration performance for the selection of optimal adsorbents for HCHO adsorption and removal. Implications : This study underscores the importance of adsorption technology for the removal of formaldehyde and similar volatile organic compounds (VOCs), highlighting the potential of alternative adsorbents, such as environmentally friendly biochar, in addition to traditional strategies, such as activated carbon and zeolites. Our findings demonstrate the feasibility of adsorbent regeneration under energy-efficient thermal treatment conditions. These results hold promise for improving indoor air quality, reducing environmental pollutants, and enhancing responses to air contaminants like fine dust and VOCs.

Bacterial cellulose aerogels with sensitive indication and high adsorption capacity for indoor formaldehyde removal

Highly sensitive formaldehyde detection using biomass hydrogel with core-shell structure

Poly (5-carboxyindole)–β-cyclodextrin composite material for enhanced formaldehyde gas sensing

Enhanced Formaldehyde Removal from Air Using Fully Biodegradable Chitosan Grafted β-Cyclodextrin Adsorbent with Weak Chemical Interaction

Evaluation of the adsorption performance and thermal treatment-associated regeneration of adsorbents for formaldehyde removal

Conjugated Microporous Poly(aniline)s for Removal of Low-Concentration Formaldehyde

Ultrasound-assisted preparation of Fe(OH)3@bacterial cellulose aerogel for efficient removal of organic contamination in water

Protonated amine and pyrene co-functionalized sodium alginate templated on reduced graphene oxide for highly efficient removal of formaldehyde and acid pollutants

Click chemistry-induced modification of covalent organic framework/cellulose aerogels for removal of dye and heavy metal ions

One-Pot Method to Synthesize Silver Nanoparticle-Modified Bamboo-Based Carbon Aerogels for Formaldehyde Removal

Biotechnology progress for removal of indoor gaseous formaldehyde

Highly Sensitive and Selective Detection of Formaldehyde via Bio-Electrocatalysis over Aldehyde Dehydrogenase.

Novel silicone-based polymer containing active methylene designed for the removal of indoor formaldehyde

Optimized Porous Clay Heterostructure for Removal of Acetaldehyde and Toluene from Indoor Air

Adsorptivity and kinetics for low concentration of gaseous formaldehyde on bamboo-based activated carbon loaded with ammonium acetate particles

Experimental Study of Adsorption Characteristic of Novel Pyrazole-Based Metal-Organic Frameworks for Volatile Organic Compounds

A naked-eye readout self-powered electrochemical biosensor toward indoor formaldehyde: On-site detection and exposure risk warning

Preliminary Experimental Research of Metal-Organic Frameworks (mofs) for Formaldehyde Dynamic Adsorption

A Colorimetric Chemical Sensing Platform for Real-Time Monitoring of Indoor Formaldehyde

Bacterial cellulose/polyethylene glycol composite aerogel with incorporated graphene and metal oxides for VOCs detection

Metal-organic Frameworks Based on Pyrazolates for the Selective and Efficient Capture of Formaldehyde