Performance of Small-Scale Waste Incinerators and Emission Levels – Case Study of Egerton University and its Environs, Kenya

D. Nyaanga,S. Owido,J. M. Muniu,S. G. M. Nyoti

2017-09-12

Abstract:Waste incineration process involves chemical reaction of organic constituents with oxygen to produce flue gases, heat energy and other residues. The flue gases may contain heavy metals which have become a threat to human health and other living organisms. The study investigated the effects of varying: moisture content; loading rate; operating temperature and types of waste on incineration performance – composition of emitted flue gases (carbon monoxide, carbon dioxide and hydrocarbon) including oxygen depletion levels. Samples of waste were weighed and placed centrally into the combustion chamber and ignited. The gas pick-up probe was connected at the chimney to pick the flue gases for analysis. Incinerating wastes with moisture content of 65, 45 and 25% yielded mean carbon dioxide emissions of 10, 7 and 5%, carbon monoxide at 7, 5 and 4 ppm and hydrocarbon at 916, 730 and 618 ppm, respectively. Waste incineration at loading rates of 45, 30 and 15 kg yielded carbon dioxide of 10, 8 and 6%, carbon monoxide of 8, 6 and 4 ppm and hydrocarbon of 945, 720 and 577 ppm, respectively. Incineration at temperatures of 850, 650 and 450C yielded carbon dioxide of 7, 9 and 12%, carbon monoxide at 6, 8 and 10 ppm and hydrocarbon yielded 644, 855 and 1293 ppm, respectively. Incineration of domestic, agricultural, institutional and commercial wastes yielded carbon dioxide emissions of 6, 8, 12 and 10% while carbon monoxide at 6, 8, 13 and 11 ppm and hydrocarbon at 671, 869, 1244 and 1095 ppm, respectively. The increase of carbon monoxide and hydrocarbon contents in the flue gas was a strong indication of inappropriate burning conditions in the furnace. Dark and dense smoke indicated incomplete waste combustion due to incinerator overloading, high moisture content, low operating temperatures and poor air/waste ratios. The low moisture content, light incinerator loading rates, high operating temperatures and well-mixed types of waste yielded low smoke density, small particle size distribution and high quality bottom ash residues. A properly controlled combustion process and furnace design would achieve high combustion efficiency and operating temperatures, better waste loading rates, a well-mixed waste, improved fuel system and air circulation. It would also lead to low moisture content and low emission of flue gases. Keywords— Performance; small-scale incinerators; moisture content; Incineration; loading rates; operating temperatures; waste types; emissions; smoke density; bottom ash.

Environmental Science,Engineering